|
| 1 | Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 Sq. m on plan), including dressing of sides & remaining of bottoms , lift upto 1.5 m , including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50 m |
| 2 | All kinds of soil. |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. |
| 5 | 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) |
| 6 | 1:3:6 (1 Cement : 3 coarse sand(zone-III) : 6 graded stone aggregate 20 mm nominal size). |
| 7 | Making plinth protection 50 mm thick of cement concrete 1: 3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well ramed and consolidated and grouted with fine sand including finishing the top smooth |
| 8 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(Zone III) : 4 graded stone aggregate 12.5mm nominal size). |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level |
| 10 | 1:1½:3 (1 cement : 1½ coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in walls (any thickness). Including attached pillasters, buttresses, plinth and string courses fillets columns, pillers, piers, abutments, posts and struts etc. upto floor 5 level exclusing cost of centring shuttering, finishing and reinforcement. |
| 12 | 1:1.5:3 (I cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 13 | Centring and shuttering including strutting, propping etc. and removal of form for |
| 14 | Foundations, footings, bases of columns etc. for mass concrete. |
| 15 | Shelves (cast-in-situ) |
| 16 | Suspended floors, roofs, landings, balconies and access platform. |
| 17 | Edges of slabs and breaks in floors and walls. |
| 18 | Under 20 cm wide |
| 19 | Columns, pillars, piers, Abutments, posts and struts |
| 20 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 21 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 22 | Cold twisted/TMT bars |
| 23 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and size: |
| 24 | Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 25 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 26 | Hot finished welded type tubes |
| 27 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 28 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. |
| 29 | Fixed to steel windows by welding |
| 30 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 31 | Second class deodar wood |
| 32 | 35 mm thick shutters |
| 33 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows . Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: |
| 34 | 35 mm thick shutters |
| 35 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 36 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire gauge of dia 0.63 mm in doors,windows and clerestory windows with hinges and necessary screws. 35 mm thick shutters |
| 37 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (35 mm thick) |
| 38 | Second class deodar wood |
| 39 | Providing and fixing aluminium tower bolts ISI marked anodised transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 40 | 200x10 mm |
| 41 | 100x10 mm |
| 42 | Providing and fixing aluminium handles ISI marked(powder coated) with necessary screws etc. complete : |
| 43 | 200 mm |
| 44 | Providing and fixing aluminium handles ISI marked(powder coated) with necessary screws etc. complete : |
| 45 | 300 mm |
| 46 | 100 mm |
| 47 | Providing and laying vitrified floor tiles (Size 600x600 mm) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 48 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. |
| 49 | Size 600x600 mm |
| 50 | 12 mm cement plaster of mix : |
| 51 | 1:6 (1 cement: 6 coarse sand) |
| 52 | 15mm Cement plaster on the rough side of single or half brick wall of mix: |
| 53 | 1:6 (1 cement: 6 coarse sand) |
| 54 | 6 mm cement plaster of mix:- |
| 55 | 1 : 3 (1 cement : 3 fine sand) |
| 56 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 57 | 1 mm thick |
| 58 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable priming coat with cement primer. |
| 59 | Finishing walls with Acrylic exterior paint of required shade: |
| 60 | New work (Two or more coats applied over and includign priming coat of exterior primer applied @2.20 kg/10 sqm) |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 62 | Two or more coats on new work |
| 63 | Providing & laying River Bed Material (RBM) including loading, carrying, unloading, spreading, compacting and watering complete item. Please Enable Macros to View BoQ information |
