|
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm. Thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 3 | Providing designation 75 B one brick flat soling joints filled with local sand including cost ofWatering, taxes, royalty, all complete as per building specification and direction of E/I. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing designation 75B Brick work in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening carriage of materials, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I. |
| 8 | Providing designation 75B Brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening, carriage of materials, scaffolding, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I. |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 11 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 12 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 13 | Providing TOR steel reinforcement of 8mm ,10mm,12mm & 16mm dia as per approved design and drawing excluding carriage of M.S bars to work site ,cutting ,bending and binding with annealed wire with cost of wire ,removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 14 | Providing TOR steel reinforcement of 8mm ,10mm,12mm & 16mm dia as per approved design and drawing excluding carriage of M.S bars to work site ,cutting ,bending and binding with annealed wire with cost of wire ,removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 15 | Providing TOR steel reinforcement of 8mm ,10mm,12mm & 16mm dia as per approved design and drawing excluding carriage of M.S bars to work site ,cutting ,bending and binding with annealed wire with cost of wire ,removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 16 | Centering and shuttering including strutting Propping etc and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 17 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | Suspended floors, roofs, landings, balconies and access platform |
| 20 | Weather shade, Chajjas, corbels etc., including edges |
| 21 | Providing 6mm. cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 22 | Providing 12mm. cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 23 | Providing 12mm. cement plaster (1:3) with punning with clean coarse sand of F.M. 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 24 | Supplying, fitting and fixing M.S. grill made of 20mm x 6mm M.S. flat asper approved desing and drawing, properly fabricated with joints continuous fillet, welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. |
| 25 | Supplying of 50x50x6mm size angle for chaukhat in windows |
| 26 | Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I. |
| 27 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. |
| 28 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces |
| 29 | Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from mercial mild steel sheet of 1.60 mm thickness,including inges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of sectionx25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical eans,including M.S. pressed butt hinges 2.5 mm thick with ortar guards,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directedby Engineer-in-charge: Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 30 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 31 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 32 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 33 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 34 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm) |
| 35 | Providing two coats of synthetic enamel paint of approved shade and make over red lead paint over steel surface including cleaning the surface thououghly, scaffolding and taxes all complete as per building specifications and direction of E/I |
| 36 | Making Plinth Protection 50 mm thich of Cement Concrete (1:3:6) over 75 mm thick bed fo dry brick ballast - do-do- E/I |
| 37 | Providing 250mm wide brick drain in cement mortar(1:6) with av .150 mm clear depth and 250 mm apron including cost of E/W involved, with 75mm cement concrete (1:4:8) over one brick flat soling designation 100A brick in proper grade and slope at the base, the drain duly plastered in C.M. (1:3) with punning over exposed surface. All complete as per building specifications and direction of E/I |
| 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter |
| 39 | Wiring for light point/fan point /exhaust fan point/call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable G.I. Box etc are required.Group B |
| 40 | Wiring for Circuit/submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. (i) 2 x1.5sq.mm. + 1 x1.5sq.mm. earth wire |
| 41 | Wiring for Circuit/submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. (ii) 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire |
| 42 | S/F Modular Boxes, base & cover plate: Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. (i) 1 or 2 Module (78mm x 78mm x 45mm) |
| 43 | S/F Modular Boxes, base & cover plate: Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. (ii) 8/9 module (78mm x 230mm x 60mm) |
| 44 | S/F Modular Boxes, base & cover plate: Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. (iii) 12 Module (135mm x 205 mm x 60 mm) |
| 45 | S/F Ceiling Rose: Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/ wooen block including connection etc as required. Make :- Anchor / Kona / Kany |
| 46 | S/F Batten / Angle Holder: Supplying and fixing batten / angle holder including connection etc as required. |
| 47 | S/F Panel mounted TP & N in Cubical Panel board:-Providing and fixing 100 amps TP & N disconnector fuse switch unit inside the exisiting panel board with ISI marked HRC fuses including holes in cubicle panel, making connections etc as required. |
| 48 | S/F S.P MCB DB :- Supplying and fixing following way, single pole and neutral sheet steel MCB distribution board 240 Volts on surface/recess, complete with tinned copper bus bar neutral bus bar, earth bar, din bar including powder Painted including earthing etc as required. (But without MCB/RCCB/ Isolator) 8 way single door |
| 49 | S/F Panel mounted change over :- Providing and fixing follwing capacity 4 Pole on load panel monted change over switches in existing cubical palel board making connetion, earthing the body etc as reauired. |
| 50 | Suppling Instalation festing and commissioning of following size celling fan 3 blades confirming to IS : 374:2019 including wiring the down roads of standard lenth (up to 30 cm) with 1.5 sqmm FR PVC insulated copper wire suitable for 230v 50 HZW, single phase supply etc complete as required. 1400mm (56'') ceiling fan. |
| 51 | S/F 10/12 watt LED Tube Light |
| 52 | Suppling and fitting 15/16 watt LED Bulb fitting |
| 53 | S/F Modular type switch/Socket :- Supplying and fixing of following modular switch/Soket on the existing modular plate & switch box including connections but encluding modular plate etc as required.5/6 amps 3 Pin Socket ourt let |
| 54 | 5/6 amps,one way switch |
| 55 | S/F Modular type electronic fan regulator :- Suppling and fixing stepped type fan regulator on the existing modular plate switch box including connections but encluding modular plate etc as required. |
| 56 | Supping XLPE/PVC insulated aluminium conductor armoured cable 1100 V grade with ISI mark three core solid/standed aluminium conductor with 6 mm thick 25 mm width MS spacer with G.I. earth wire 6 sqmm complete in an approved manner as per is 7098 3.5 core 25 sqmm |
| 57 | Carriage of materials to worksite by any mechanical means including loading at querrysite / godown and unloading at worksite including all taxes, cost of labour, fuel, lubricants etc. all complete as as per building specification and direction of E/I.I. Sand Lead (10) KM. |
| 58 | Stone Chips Lead (69)KM. |
| 59 | Bricks Lead (8) KM. |
| 60 | Add 18 % GST |
| 61 | Add 1% LC Please Enable Macros to View BoQ information |
