|
| 1 | Earth work excavation of foundation & plinth in hard soil with initial lead & lifet incl. rough dressing and levelling etc. complete. |
| 2 | Filling foundation and plinth with sand well watered and rammed including all costs etc complete. |
| 3 | Cement Concrete (1:3;6) using 40mm.size C.B.G metal including all cost etc complete |
| 4 | Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in foundation and plinth |
| 5 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying |
| 6 | Column base & footing |
| 7 | Plinth Bend |
| 8 | Column super structure |
| 9 | Lintel |
| 10 | staircase |
| 11 | FLY ASH .Brick masonary in Super structure in C.M. (1:6) -10\\" |
| 12 | Supplying ,Cutting,bending, binding of HYSD (Fe-415)Steel including all cost , carriage etc. complete. |
| 13 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment. |
| 14 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor |
| 15 | Fixing Vertified Tiles in Floor laid on 20mm cement plaster (1:4) c.m.jointed with cement slusy mixed with pigment to match the shade of the tiles including rubbing & polishing complete including cost of tiles. |
| 16 | Fixing Vertified Tiles in Floor laid on 20mm cement plaster (1:4) c.m.jointed with cement slusy mixed with pigment to match the shade of the tiles including rubbing & polishing complete including cost of tiles. |
| 17 | Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc |
| 18 | Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc |
| 19 | 12 mm thick cement plaster (1:6) over brick work finished smooth. |
| 20 | 16mm thick in C.M.(1:6) over brick masonary to the smooth surface including all costs etc. complete. |
| 21 | Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surfacein |
| 22 | Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface |
| 23 | SUPPLYING,FITTING,FIXING OF DOOR & WINDOW WITH STEEL |
| 24 | Painting two coats with approved Enamel Paint on Steel surface over a coat of Red Oxide Primer |
| 25 | Providing and laying factory made chamfered edge cement concrete coloured paver block 60 mm thick of M 35 grade of required strength thickness and size/shape made by table vibratory method to attain superior smooth finishing using PU or equivalent moulds laid in required colour & pattern over 50mm thick compacted bed of course sand,compacting and proper embedding/laying of interlocking paver blocks in to the sand bedding layer through vibratory compacting by using plate vibrator.Filling joints with fine sand and cutting of paver blocks as per required size/pattern, finishing and sweeoing sand in foot path,parks,lawns,drive ways or light traffic parking and lanes/roads etc,all complete as per spacification and direction of E.I.C. |
| 26 | DISPLAYBOARD Please Enable Macros to View BoQ information |
