|
| 1 | Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meter (200 feet).DSR 15:56(Including all taxes, labour cess etc but excluding GST) |
| 2 | 12mm thick plaster with cement mortar consisting of 1 part cement and 6 part of approved coarse sand. Minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work.DSR-13.4.2(Including all taxes, labour cess etc but excluding GST) |
| 3 | Scraping old white or color wash including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meter (200 feet). SOR No 708(Including all taxes, labour cess etc but excluding GST) |
| 4 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shuttersDSR 9.21.1(Including all taxes, labour cess etc but excluding GST) |
| 5 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.(Including all taxes, labour cess etc but excluding GST) |
| 6 | Providing and fixing flexible P.V.C. waste pipe 40 mm for sink or wash basin including PVC waste fittings complete.DSR 17.28.2.2(Including all taxes, labour cess etc but excluding GST) |
| 7 | Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. DSR 17.31(Including all taxes, labour cess etc but excluding GST) |
| 8 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR18.48(Including all taxes, labour cess etc but excluding GST) |
| 9 | Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms. 15mm nominal bore. AS per SOR 18.50(Including all taxes, labour cess etc but excluding GST) |
| 10 | Providing and fixing G.I. Union in G.I. Pipe including cutting and treading the pipe and making long screws etc. complete (New work). 20mm nominal bore. AS per SOR 18.46(Including all taxes, labour cess etc but excluding GST) |
| 11 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This ncludes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. internal work. exposed on wall. 20mm nominal outer dia pipes. As per SOR 18.7(Including all taxes, labour cess etc but excluding GST) |
| 12 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge. external work. 25 mm nominal outer dia Pipes DSR 18.9.3(Including all taxes, labour cess etc but excluding GST) |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia PipesDSR 18.9.3(Including all taxes, labour cess etc but excluding GST) |
| 14 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore DSR 18.49.1 (Including all taxes, labour cess etc but excluding GST) |
| 15 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufactureDSR 13.48.2(Including all taxes, labour cess etc but excluding GST) |
| 16 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80(Including all taxes, labour cess etc but excluding GST) |
| 17 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primerDSR 13.41.1(Including all taxes, labour cess etc but excluding GST) |
| 18 | Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations : a) Applying a a slurry coat of neat cement using 2.75 kg/sq.m of cement admixed with waterproofing compound conforming to IS : 2645 and approved by engineer-in-charge over the RCC slab including adjoining walls up to 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement:5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by engineer in charge to required slope and treating similarly the adjoining walls up to 300mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by Engineer in charge. d) Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with waterproofing compound conforming to IS : 2645 and approved by Engineer incharge. d) Finishing the surface with 20mm thick joint less cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with waterproofing compound conforming to IS : 2645 and approved by Engineer in charge including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm sqm. 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65mmDSR-22.7.1(Including all taxes, labour cess etc but excluding GST) |
| 19 | Providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600 mm x600 mm size in flooring or skirt ing laid with 1:3 cement mortar (1 cement :3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T &P required for proper completion of work.DSR 11.41.2(Including all taxes, labour cess etc but excluding GST) |
| 20 | Supply and fixing 6 mm China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm).DSR 11.37A(Including all taxes, labour cess etc but excluding GST) |
| 21 | M-150 brick work in 1:4 cement and coarse sand of 1:25 fineness modules mortar in super structure as per DSR- 6.2.1(Including all taxes, labour cess etc but excluding GST) |
| 22 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid As per DSR 17.3.1(Including all taxes, labour cess etc but excluding GST) |
| 23 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fiftings and brackets, cutting and making good the walls wherever require. White vitreous china wash basing size 630x450 mm with a pair of 15mm C.P. brass pillar taps. As per DSR 17.7.1(Including all taxes, labour cess etc but excluding GST) |
| 24 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fiftings and brackets, cutting and making good the walls wherever require. Stainless steel AISI-304(18/8) wash basin 530x345mm with single 15mm C.P. brass pillar tap. As per DSR 17.7.11(Including all taxes, labour cess etc but excluding GST) |
| 25 | M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.DSR 10.25.1(Including all taxes, labour cess etc but excluding GST) |
| 26 | I-black granite (Polished) in big slab 20mm thick(Including all taxes, labour cess etc but excluding GST) Please Enable Macros to View BoQ information |
