|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 3 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 4 | Making apron(with Drain & other )analysis Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 5 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)Foundation Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).Lintel of doors & window, sunshades etc. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).Beam Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)slab Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) colums, rcc wall Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 11 | First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc reqiored for proper completion of the work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 12 | First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in above plinth level up to floor five level including supply of all materials, labour and T & P etc reqiored for proper completion of the work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 13 | First class brick work in 1:4 cement and coarse sand of 2.25 fineness modulus) mortar in above plinth level up to floor five level including supply of all materials, labour and T & P etc reqiored for proper completion of the work. Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 14 | (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (a) Sal Wood. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 16 | Supply and fixing of flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including ixing and adjustment of hinges, bolts,locks, handle, springs and other fittings with necessary screws to be supplied departmentally (30 mm thick ) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 17 | 35 mm thick Double leaf |
| 18 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 19 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady] the frame. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 20 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 21 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 22 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding (hold fast) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 23 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 24 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 25 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.(a) Door chaukhats Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 26 | (b) Window chaukhats up to 1.5 sqm |
| 27 | (c) Ventilator chaukhats |
| 28 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 29 | 12 mm cement plaster of mix : (1)1 cement : 6 c. sand |
| 30 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 |
| 31 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) |
| 32 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (40 mm flooring) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 34 | Providing and laying vitrified floor tiles withou lean concrete in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 35 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 36 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 37 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour and shade Area of slab upto 0.50 sqm Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 38 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 39 | Supply and fixing 6mm (1/4\\") thick china white glazed tilesin flooring or in skirting or dado laid with 1:3 cement and approved course sand mortal finished with white cement slurry jointing and polished complete including supply of all materials labour T & P etc. required for proper completion of the work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 41 | Two coat Wax or French polishing new wood work with approved ready made wax polish or approved French polish after rubbing down with sand paper, including supply of all material, labour and tools & plants etc required for proper completion of the work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 42 | Same as item above but on new wood surface. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 43 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 44 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compund) content less than 50 grams/ litre of approved brand & manufacture, including applying addotional coats whereever required to achieve even shade & colour. Two coats, with water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 45 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 46 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 47 | Providing & fixing stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 48 | P/Fixing stainless steel tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as / IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. 250 mm x 10mm Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 49 | Providing & fixing bright/ matt finished stainless steel handles of approved quality & make with screws and 125mm long.SI marked Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 50 | Providing and fixing stainless steel hanging floor door stopper with necessary screws etc. complete. Twin rubber stoper |
| 51 | Providing and Fixing of Door slincer including necessary screws etc complete |
| 52 | Supply and filling of cinder in sunken in portion of building including breaking into required sizes including supply of all material, labour T&P required for proper completion of the work. |
| 53 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 54 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 55 | Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick. |
| 56 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick |
| 57 | Columns,Pillars, Piers, Abutments, Posts and Struts. |
| 58 | Electricals PartWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 59 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 60 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 61 | Wiring points for Plug with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & socket sheet etc.complete in all respects.as directed including matching colour wash. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 62 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 63 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2X1.5 sq. mm+1X1.5 sq. mm earth wire Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 64 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 65 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 66 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 67 | Providing and fixing circular/ Hexagonal GI box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick GI sheet with its top surface hacked for proper bonding, top lid shall be screwed into the GI box by means of 3.3 mm dia round headed screws, one lock at the corners, clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 68 | Supply & fixing of single wall bracket on matching M.D.F.E.G. board base etc. complete in all required. Cat. AAA Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 69 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect.CAT AAA Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 70 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 71 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 72 | Same as above but for 63 A |
| 73 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 74 | Same as above but for 6 way (4 + 18), Double door |
| 75 | Supply and fixing of power plug with 15 Amp./250 Volt flush type universal switch and 5 pin 15 A/250 V flush type universal socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 76 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of2.7 metre long etc. with charcoal/ coke and salt as required. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 77 | Supplying & Laying of 25mmx5mm G.I. Strip for earthing purpose as required complete in all respects. |
| 78 | Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. |
| 79 | Supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.2mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used. All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports. The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm, Phase to neutral-minimum 15mm, Main L.T. Panel, incoming :One (1) No 200A 4 pole MCCB, Metering : One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch., One (1) No. (0-200A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc. One (1) Set of Phase Indication Lamp. Bus Bar : One (1) No.200 A, TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided. 100Amps TPN - 2 Nos , 63 AMP TNP-2 NOS. OR outgoing as per site requirment Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 80 | S/F of 100 mm dia G.I pipe \\"B\\" class for cable completed with support's by 3 nos. clamp made for 20x30 mm MS flat and suitable size of nutbolt & washer required for proper completion of worh as per direction of E/I. |
| 81 | Supply and laying of aluminium conducter PVC insulated armoured served sheathed cables 1100 volts grate at a depth of below ground lvl over a cusion of 75 mm thick sand alround and protected with burnt on side and on top ,On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by E/I complete in all respects,The armouring of the cable shall be properly connected with the earth conductor by clamps atc. (i) 10 Sq. mm 2core |
| 82 | (ii) 120 Sq. mm 3.5 core |
| 83 | Supply 7 fixing of plain or pin type copper tin plated cable socket to the cable leads, insulated with tape and making connection etc. complete in all respect as per direction of E/I (i) 10 Sq. mm Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 84 | (ii) Same as above but for 120 Sq. mm |
| 85 | Septic Tank: Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed. |
| 86 | In all kind of soil upto 1.5m to 3.0m. depth |
| 87 | In all kind of soil upto 3.0m to 4.50m. depth |
| 88 | Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 20mm nominal size) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 89 | Reinforced cement concrete work in slab with 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20mm normal size). |
| 90 | Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand) |
| 91 | Reinforcement for R.C.C. work including, straightening, cutting bending binding and placing in position complete. |
| 92 | 15mm cement plaster on rough side of mix 1:4 (1 cement : 4 course sand) |
| 93 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 gradeed stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2( 1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Including all T&P, Labour, Material, Royalty Tax but excluding GST Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 94 | Providing and fixing C.I. tee at the inlet and outlet of septic tank. |
| 95 | Providing & fixing 75mm dia vent pipes. |
| 96 | Providing & fixing of 75mm dia cast iron terminal guard. |
| 97 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter |
| 98 | L.D. -2.5- Circular shape 450mm internal diameter |
| 99 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 100 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in require Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 101 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 102 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 103 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20. As in item 4 above but in R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 104 | As in item above but for the lighter beams i.e. having spans upto 6 m. (PWD- 285 analysis) |
| 105 | As in item 4 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20. |
| 106 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 107 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. Including all T&P, Labour, Material, Royalty Tax but e |
| 108 | 12 mm cement plaster in single coat on FAIR side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 109 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 110 | Supply and fixing M.S. Work in gate 'including all necessary for proper 'completion of the work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 111 | Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 112 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete Including all T&P, Labour, Material, Royalty Tax but excluding GST |
| 113 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 114 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. Please Enable Macros to View BoQ information |
