|
| 1 | Demolition of brickwork built in cement mortar including quoins, arches, pillar etc complete all as specified and directed. |
| 2 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 3 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed. |
| 4 | M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed. |
| 7 | M&L for preparation of new surface of wall and applying two coats oil bound distemper over one coat of primer over 1mm thick birla white wall care putty complete all as specified and as directed.. |
| 8 | M&L for complete removal of existing treatment of wall and applying two coats of white wash on wall complete all as specified and directed. |
| 9 | M&L for preparation of new surface of wall and applying three coat of white wash complete all as specified and as directed. |
| 10 | M&L for preparing new plaster surfaces of wall and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed |
| 11 | M&L for preparing old plaster surfaces of wall and applying one coat of cement base paint complete all as specified and directed |
| 12 | Taking down chowkat or frames not exc. 1.5 sqm each with shutters (without taking off shutters from frames) complete all as specified and directed |
| 13 | Taking down chowkats with shutters exceeding 1.5 Sqm but n. exc 4 sqm each ( without takig off shutters from the frames) complete all as specified and directed |
| 14 | Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed |
| 15 | M&L for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 16 | Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc complete all as specified and directed |
| 17 | M&L for 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinged pin, anodised and fixed, type C-21 complete all as specified and directed |
| 18 | M&L for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed |
| 19 | M&L for Extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed |
| 20 | S&F for aluminium anodised barrel tower bolt extruded section 200 mm long complete all as specified and directed |
| 21 | M&L for stainless steel steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 22 | S&F for 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 23 | S&F floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 24 | M&L for preparation of new wooden surfaces and applying two coat synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 25 | M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed |
| 26 | M&L for preparation of old surfaces of steel and applying one coat of synthetic enamel paint complete all as specified and directed |
| 27 | S&F PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, complete all as specified and directed |
| 28 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & botttom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame including 2 nos aluminium bow handle 150mm and 2nos aluminium tower bolt of size 150mm etc complete all as specified and directed. |
| 29 | S&F in stainless steel harrison rails/ curtain rod fancy type 25 mm dia including bracket, stops, rollers etc complete all as specified and directed complete all as specified and directed |
| 30 | Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed. |
| 31 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed |
| 32 | M&L for glazed ceramic coloured tiles in vertical surface 300x450 x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles including rendering 10 mm thick on faces of brick or concrete surfaces in cm 1:3 complete all as specified and directed. |
| 33 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete all as specified and directed |
| 34 | M&L for 18 to 20mm thick granite stone (any type of work) in steps, jambs, pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 35 | M&L in Machine cut Plolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick screed bed in CM(1:6) complete all as specified and directed |
| 36 | M&L in Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over 10mm thick screed bed in CM(1:3) complete all as specified and directed |
| 37 | M&L for chamfers, splays or arris of granite in face work exc. 15mm but n. exc 50 mm wide complete all as specified and as directed. |
| 38 | Taiking up or down steel tubing and connections, 15 mm bore complete all as specified and directed. |
| 39 | Taking up or down steel tubing and connections, 20 mm bore complete all as specified and directed. |
| 40 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubings, cutting not exceeding 10cm girth complete all as specified and directed. |
| 41 | M&L for GI tubing 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 42 | M&L for GI tubing 20 mm bore 'medium grade' galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 43 | Refixing of old steel tubing 15mm bore pipe and connection in new or old portion (wall, celing etc) complete all as spd and directed. |
| 44 | Refixing of GI tubing 20 mm bore any grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 45 | S&F in repairs Viterous China water closet squatting pan, 'Orrisa' pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor complete all as specified and directed |
| 46 | S&F in repairs wash basin, Vitreous China white flat back of size 550x400mm including 32mm bore Chromium plated waste fitting cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and porcelain stopper but including brackets complete all as specified and directed |
| 47 | S&F in repairs 32mm bore bottle trap of PTMT having minimum water seal of 25mm (min weight 32mm-260gms/ 40mm 270gms) complete all as specified and directed |
| 48 | S&F in repairs 600x450 mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick, AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws & cup washers etc complete all as specified and directed. |
| 49 | S&F in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 50 | Supply and fix in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all as specified and directed. |
| 51 | S&F chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and as directed. |
| 52 | Taking down rain water / vent pipe of any description including fittings etc. including removal to store, complete all specified and directed. |
| 53 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as specified and directed |
| 54 | Description same all as per item No 53 here-in-before but 75mm bore complete all as specified and directed. |
| 55 | S&F for 110mm bore PVC (SWR) bends, of any radius provided without access door complete all as specified and directed |
| 56 | Description same all as per item No 55 here-in-before but 75mm bore complete all as specified and directed. |
| 57 | S&F for 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed |
| 58 | S&F for 100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete all as specified and directed |
| 59 | S&F 75mm dia outlet PVC (SWR) floor trap, plain with granting including jointing with solvent cement complete all specified and directed. |
| 60 | S&F for vent cowl for 75 mm bore pipe complete all as specified and directed. |
| 61 | S&F for vent cowl for 110 mm bore pipe complete all as specified and directed. |
| 62 | S&F in repair kitchen sinks without drainage board bowl size 410mm x330mm x116mm, made of stainless steel 1 mm thick with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and directed. |
| 63 | S&F in repairs cast copper alloy chromium plated fancy type angle cock, of 15 mm bore complete all as specified and directed. |
| 64 | S&F in repairs gun-metal gate valve 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 65 | S&F in repairs fancy type, chromium plated bib taps, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed. |
| 66 | S&F for PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 67 | S&F in repairs chromium plated shower roses with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified and directed |
| 68 | S&F in repairs 15 mm bore WHB mixture fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered ' Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and directed |
| 69 | Dismantling water tanks capacity exc 500 but n. exc 1000 Ltrs complete all as specified and directed. |
| 70 | S&F for rotational moulded polyethylene water storage tanks white colour tripple layers with thread type locking cover arrangement, 1000 ltrs (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed |
| 71 | S&F for Ball valves high pressure, with polythene float and fly nut complete, screwed for iron pipe 20 mm bore or brass ferrule and fixed complete all as specified and directed |
| 72 | M&L for Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and other similar work complete all as specified and directed |
| 73 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 74 | M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone agg ) as in copping, over Chajja, cills and other similar work complete all as specified and directed |
| 75 | Supply only liquid water proofing compound complete all as specified and directed |
| 76 | Demolition of cement concrete in ground floors and paving n. exc 15cm thickness (below or above GL) complete all as specified and directed |
| 77 | M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed |
| 78 | M&L for cement concrete (1:4:8) type D-2 in foundations filling and mass concrete complete all as specified and directed |
| 79 | Demolition of reinforced cement concrete in slabs complete all as specified and directed |
| 80 | M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, copies, deck slabs and in shelves complete all as specified and directed. |
| 81 | Use and waste of form work (flat) to rough finished surfacesides and soffits of floor and roof beams, cantilevers, shelves etc complete all specified and directed. |
| 82 | S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed. |
| 83 | Description same all as per Item No 82 here in above but mild steel TMT bars 6 to 8 mm dia complete all as specified and directed |
| 84 | Cutting holes in brick wall (exc half brick and n exc one brick )in cement mortar or cement lime mortar and stone wall built in lime mortar for holdfasts or inserting rungs for staging or roofs complete all as specified. |
| 85 | S&F for box type steel windows with side hung shutters including projected type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 86 | S&F for box type steel windows with side hung shutters including projected type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 87 | S&F for MS steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed. |
| 88 | S&F for 4mm thick sheet glass ordinary quality and glazing with oil puty in square not exeeding 0.5 sqm in each pan complete all as specified and directed. |
| 89 | M&L for 40mm thick cement concrete type B-1 1:2:4 (20mm graded aggregate finished even and smooth with using extra cement as in floor complete all as specified and directed |
| 90 | S&F for PTMT grating doom square 150mm size (minimum wt 100 gms) complete all as specified and directed. |
| 91 | S&F for PTMT grating doom square 150mm size (minimum wt 100 gms) with waste hole complete all as specified and directed. |
| 92 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed |
| 93 | M&L for Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping scews complete all as specified and directed |
| 94 | M&L for Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping scews complete all as specified and directed |
| 95 | M&L for Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Grade E-250) Quality-A including of dismantling of old wrought iron and carried over to schedule of credit complete all as specified and directed |
| 96 | Dismantling wall and ceililing boards (fibre, pulp, insulation etc. ) or insulation boards/ slabs/ blankets, any thickness, including cover fiilets complete all as specified and directed. |
| 97 | S&F in repair suspended false ceiling with \\"E\\" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 98 | S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed |
| 99 | S&F in repairs cast copper alloy chromium plated fancy type stop cock cocealed type, of 15 mm bore complete all as specified and directed. |
| 100 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed |
| 101 | Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed |
| 102 | Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed |
| 103 | M&L for point wiring concealed in wall complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit \\"medium grade\\" ISI marked including all conduit accessories for concealed wiring and Modular sunken box,cover plate/frame any module as required at site with accessories as specified for one light/fan point controlled by one, one way switch including 1.5Sqmm FRLS type PVC insulated unsheated cable multi-stranded green colour, cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed |
| 104 | Description same all as per item No 103 here-in-before but one 3 pin, 5 Amps socket out let on independent board complete all as specified and directed. |
| 105 | Description same all as per item No 103 here-in-before but 3 pin ,5 Amps socket out let on the same board with other switch complete all as specified and directed. |
| 106 | Description same all as per item No 103 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed. |
| 107 | Description same all as per item No 103 here-in-before but for one socket outlet 16 Amps on independent board with 2.5 Sqmm cable and 2.5 Sqmm earth wire complete all as specified and directed. |
| 108 | S&F for modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed. |
| 109 | S&F for modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed. |
| 110 | S&F for modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed. |
| 111 | S&F for modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed. |
| 112 | S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete complete all as specified & directed. |
| 113 | S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 114 | S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed. |
| 115 | S&F modular bell push flush type 6 amp, 1 module SP , 230V AC complete all as specified & directed. |
| 116 | S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed. |
| 117 | S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240Volts with 200 Amps rated bus bar confirming to IS 13032,BS 5484 (IP 42) of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 118 | S&F for MCB Single Pole and neutral, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed. |
| 119 | S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'B' Curve complete all as specified and directed. |
| 120 | Taking down existing old /worn out tube/CFL/bulk head/sketch light fittings of indoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified & directed |
| 121 | Supply and fix wall mpunted LED fitting fancy type (City -2 type) with 9 watt LED built inverter type including making connection with 2 core PVC insulated sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed |
| 122 | S&F for 1 x 10W LED Mirror light fitting, LED 6000K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Make Havells IVORY Model No LHESABP7IN1W009 or equivalent of Philips/ Crompton greaves. |
| 123 | S&F for 1 x 10W LED Bulk head light fitting, LED 600 lumen, enclosed in polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Make Philips ENDURA Model No WT202W LED6S CW PSU S1 PC or equivalent of Havells / Crompton greaves. |
| 124 | S&F for 1 x 20 W LED wall mounted tube light fitting ( inverter type), 120 lumen/watt ,LED 6000K, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Make Bajaj/ Philips/ Crompton greaves. |
| 125 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed Please Enable Macros to View BoQ information |
| 126 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed Please Enable Macros to View BoQ information |
