|
| 1 | R.C.C. M-25 using 12mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying & complete as per specification and direction of the Engineer-in-charge Column |
| 2 | Lintel |
| 3 | Chajja |
| 4 | Roof Slab |
| 5 | Staircase |
| 6 | Cutting bending binding and tying the grills including placing in proper position and gap with tor steel including cost, conveyance taxes of all materials labour T&P required for the work etc. complete as per direction |
| 7 | Fly ash Brick work with 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance 8 percent in cement mortar (1:6) in Superstructure works as per direction of the Engineer-in-charge |
| 8 | 12mm thick C:P (1:4) over brick work including cement punning & bitumen painting over Top of wall to work site per 1sqm. royalty and taxes of all materials labour T&P required for the work etc. complete |
| 9 | 16mm ( 5 /8\\") thick cement plaster of (1:6) over odd side surface of the wall including cost, conveyance royalty and taxes of all materials labour T&P required for the work etc. complete |
| 10 | 12mm, thick cement plaster (1:6) for brick work including cost conveyance royalty and taxes of all materials, labour T&P required for the work etc. complete as per direction of the Engineer-in-charge |
| 11 | 6 mm thick cement plaster on Ceilings (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including cost, conveyance royalty and taxes of all materials & direction of the Engineer-in-charge |
| 12 | Fixing best quality marbles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles |
| 13 | Supplying fitting and fixing of wall pannelling made with 19mm thick BWR ply and Sunmic including all cost of labour hardware fitting T&P etc. complete |
| 14 | Fixing Marbles on floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement: Isand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including all cost |
| 15 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams including cost, conveyance taxes of all materials |
| 16 | Providing supplying of WI clamps to door and window choukaths including cutting grooves and repair the same including cost of all materials labour T&P etc. complete |
| 17 | 32mm thick ply wood with sunmica fitting shutters with all labour iron fittings, wooden hinged cleats etc. fitted and fixing complete in all respect excluding cost of Iron fittings |
| 18 | Painting two coat with any appproved paint on new wood work over a coat of primer including cost conveyance taxes of all materials, labour T&P required for the work etc. complete |
| 19 | Supplying ,fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures |
| 20 | Supplying ,fitting and fixing of Openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures |
| 21 | Supplying Windows grills of approved make to be fabricated from Iron as per IS 513 6mm thick D type with all cost & painting two coats |
| 22 | Providing and applying two coats of enamel paint of approved brand on steel surface after thorough cleaning of surface to give an even shade complete including cost conveyance taxes of all materials, labour T&P required for the work etc. |
| 23 | Providing fitting and fixing of Steel railing to stairs as per IS 513 50mm thick 0 type with all cost & painting two coats |
| 24 | 2.5 cm thick grading Plaster (1:2:2) on roof slab with coarsed sand On new workincluding cost, conveyance royalty and taxes of all materials & direction of the Engineer-in-charge |
| 25 | Providing fitting and fixing of false ceilling with Aluminium nodised T Section No. 3215 with 2'-0\\" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2' fitted with Gypsom board |
| 26 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 27 | Supplying fitting fixing of roller blind window screen including cost conveyance taxes of all materials labour T&P etc. complete |
| 28 | Painting two coats with approved shade using Plastic paint with cost of all labour materials T&P etc. complete including cost conveyance taxes of all materials, labour T&P scaffolding required for the work etc. complete as per direction |
| 29 | Finishing walls with weather coat paint two coats of approved shade on one coat of primer on new work over a coat of primer with all cost Please Enable Macros to View BoQ information |
