|
| 1 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). |
| 2 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 3 | a) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 5 | a) Suspended floors, roofs, landings, balconies and access platform |
| 6 | b) Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 8 | a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 9 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 10 | 250x16 mm |
| 11 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 12 | a) 250x10 mm |
| 13 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 14 | a) 125 mm |
| 15 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 16 | a) 30 mm thick shutters |
| 17 | i) With ISI marked stainless steel butt hinges ofrequired size - Kiln seasoned and chemically treated hollock wood |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 20 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 21 | (i)Single socketed pipes. |
| 22 | a) 75 mm diameter |
| 23 | b) 110 mm diameter |
| 24 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 25 | a) Single tee without door |
| 26 | i) 75x75x75 mm |
| 27 | ii) 110x110x110 mm |
| 28 | b) Bend 87.5° |
| 29 | i) 75 mm bend |
| 30 | ii) 110 mm bend |
| 31 | 12 mm cement plaster of mix : |
| 32 | a) 1:6 (1 cement: 6 fine sand) |
| 33 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 34 | a) 1:6 (1 cement: 6 fine sand) |
| 35 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand). |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 37 | a) Two or more coats on new work. |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 39 | a) One or more coats on old work. |
| 40 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 41 | a) Old work (Two or more coats) |
| 42 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 43 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 44 | a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 45 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 46 | a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 47 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 48 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 49 | a) For thickness of tiles 10 mm to 25 mm |
| 50 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 51 | a) 10 litre capacity - White |
| 52 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 53 | a) Orissa pattern W.C. pan of size 580x440 mm |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. |
| 55 | a) 20 mm nominal outer dia .Pipes. |
| 56 | b) 25 mm nominal outer dia .Pipes. |
| 57 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 58 | a) 45 cm length |
| 59 | i) 15 mm nominal bore |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 61 | Uprooting and cutting plants grown on the walls of buildings i/c dismentling brick work wherever required and making the same good complete as per directios of the Engineer in Charge. |
| 62 | Providing and applying a coat of rust remover and passivator chemical on the steel surface of reinforcement /bars a product of approved brand and manufacurer like SIKA,Dr Fixit ,Choksey or equivalent leave the same for 24 hours for dry remove and loose red rust from steel surface with help of wire brush and sand paper redo the same process inthe same manner till the reinforcement not clean all complete as per direction of engineer in charge. |
| 63 | Providing and applying polymer modified anticorrosive coating a product of approved brand and manufacurer like SIKA,Dr Fixit ,Choksey or equivalent over and above the cleaned surface of reifircement to products from futher corbonation attckall complete as per direction of engineer in charge. |
| 64 | Arranging electric welding machine at site for repairing works etc. with necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day or part day work at one site shall be taken as one job.) |
| 65 | Providing and fixing chicken mesh jaali in ceiling using nails and other fixtures all complete as per direction of E-in-C |
| 66 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 67 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 12 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with Vertical bamboo&horizontal bamboo, placed 1.5 metre centre to centre, challis, in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of civil repair works . The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in- charge. (The payment will be made once only for execution of all items for such works). |
| 68 | Cleaning of Manhole with connecting sewer line and disposal of malva out side compound etc all complete as per direction of E-in-C. |
| 69 | Providing and laying water proofing treatment in Terrace portion, with polymer modified cementitious coating all complete as per direction of E-in-C |
| 70 | Raking out joints in cement mortar and preparing the surface for filling of open joints with cement slurry in brick tile of terrace for water proofing treatment including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
| 71 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 72 | a) Of area 3 sq. metres and below |
| 73 | Providing and fixing steel glazed windows and ventilators, side /top /centre hung, with beading and all members etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). |
| 74 | a) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 75 | Providing and fixing fly proof galvanized M.S. wire gauge to windows using wire gauge in both directions all complete. |
| 76 | Credit to agency unusable/unserviceable items |
| 77 | a) CP Brass items |
| 78 | b) Flush door shutters |
| 79 | c) GI pipes |
| 80 | d) CI Pipes |
| 81 | e) rusted iron sections |
| 82 | f) damaged Storage tanks Please Enable Macros to View BoQ information |
