Tender For Supply And Installation Of Children Play Equipments At Various Parks In Dilshad Garden, Ward No. 217, Shahdara North Zone, Horticulture Department Under Cmdf., Delhi-Delhi
TDR : 54773384
Tender Notice
BOQ
5 Days Left
Delhi
Delhi
Tender For Supply And Installation Of Children Play Equipments At Various Parks In Dilshad Garden, Ward No. 217, Shahdara North Zone, Horticulture Department Under Cmdf.
Name of Work:- SUPPLY AND INSTALLATION OF CHILDREN PLAY EQUIPMENTS AT VARIOUS PARKS IN DILSHAD GARDEN, WARD NO. 217, SHAHDARA NORTH ZONE, HORTICULTURE DEPARTMENT UNDER CMDF.
Sl. No.
Item Description
1
SUPPLY AND INSTALLATION OF CHILDREN PLAY EQUIPMENTS AT VARIOUS PARKS IN DILSHAD GARDEN, WARD NO. 217, SHAHDARA NORTH ZONE, HORTICULTURE DEPARTMENT UNDER CMDF.
2
SUPPLY AND FIXING OF ARCH SWING. LEG SUPPORT : 80 MM NB PIPE, SEAT- ANTI SKID RUBBER BELT. BEARING : HEAVY DUTY BALL BEARING. AREA : 3.0 M X 2.5 M. HEIGHT : 2.5 M. TOP BAR : 60 MM NB PIPE. SUSPENSION : 6 MM RUBBER COATED CHAIN. THE TOPCOAT IS DULY POWDER COATED. IN THIS ONE CHILD CAN ENJOY THE SWING AT ONE TIME. THE ARCH SHAPED SIDE FRAME SHALL BE MADE OF 80MM NB B CLASS GI PIPE SHALL BE MADE UP OF 50MM NB B CLASS GI PIPE. THE FRAME SHALL BE POWDER COATED TO GIVE AN AESTHETIC LOOK. THE SWING SHALL BE MADE UP OF 10MM THICK ANTI SKID RUBBER TOP THE RUBBER BELT SEAT / U SHAPE SWING SEAT WITH 2 EYE BOLT TYB-S06. MADE OF POLYURETHANE OF SIZE：53 X 20.5 X 20 SHALL BE SUSPENDED ON 6MM RUBBER COATED GI CHAIRN. THE BAIL BEARINGS SHALL BE MOUNTED INSIDE A SPECIALLY DESIGNED NYLON CLAMP. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)
3
SUPPLY AND FIXING OF TODDLER SWING.THE AREA :- 2.8M X 1.0M . IN THIS TODDLER SWING THE CENTER SUPPORT SHALL BE MADE UP OF 80 MM NB B CLASS G.I. PIPE. THE HORIZONTAL BARS SHALL BE MADE UP OF 50 MM NB B CLASS G.I. PIPE. ALL GI PIPES SHALL BE POWDER COATED. BETWEEN THE TWO HORIZONTAL BARS THERE SHALL BE A HEAVY-DUTY METAL CLAMP ATTACHED TO IT. THE BUCKET SEATS OF THE TODDLER SWING SHALL BE MADE OF RUBBER WITH ANTI SKID. THE BALL BEARINGS SHALL BE MOUNTED INSIDE SPECIALLY DESIGNED NYLON BALLS. THE RUBBER SEAT SHALL BE AFFIXED ON 8 MM THICK GI CHAIN. THE SEATS SHALL BE MADE WITH FULL CARE SO THAT THE CHILD DOES NOT FALL FROM IT WHILE SWINGING. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)
4
SUPPLY AND FIXING OF FOUR SEATED MERRY GO ROUND. AREA: 1.5 M. HEIGHT – 0.8 M. SEAT – MOULDED F.R.P. MAIN FRAME: 40 NB G.I. PIPE. BEARING : HEAVY DUTY BEARING. MS PLATE: 250X10MM. SUPPORT PIPE- 80NB. THE TOPCOAT IS DULY POWDER COATED. THE ITEM SHALL BE HAVING ITS MAIN FRAME MADE UP OF 25 & 40. MM NB “B” CLASS G.I. PIPE. THE STAND SHALL BE MADE IN 80 MM NB “B” CLASS G.I. PIPE. THE WHOLE STRUCTURE SHALL BE MOUNTED ON HEAVY DUTY BEARING SHAFT. THE BEARING USED SHALL BE OF HEAVY DUTY BEARING PERMANENTLY LUBRICATED WITH WATER SEALANT. THE SEAT FRAME SHALL BE MADE OUT OF FRP (FIBRE REINFORCED PLASTIC)/LLDPE (LOW LINEAR DENSITY PLOY ETHYLENE). THE SEATS SHALL HAVE HANDRAILS SO THAT THE CHILD DOES NOT FALL. IT SHALL ACCOMMODATE 4 CHILDREN AT A TIME. THE POWDER COATING SHALL BE DONE ON THE PIPES TO AVOID RUSTING. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)
5
SUPPLY AND FIXING OF WAVE LADDER.MAIN BODY :-32 MM N B GI PIPE. SUPPORT :- 25 MM NB GI PIPE. THE TOPCOAT IS DULY POWDER COATED. IT SHALL HAVE MAIN FRAME MADE OF 32 MM G.I PIPE WITH STEPS MADE FROM 25 MM G.I PIPE THE PIPES SHALL BE POWDER COATED TO PREVENT RUSTING AND FOR AESTHETIC LOOK. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)
6
SUPPLY AND FIXING OF SPIRAL SLIDE. LADDER-FRAME- 25M M N B PIPE. HANDRAIL - 20 MM N B PIPE. CENTRE SUPPORT- 50 MM N B PIPE. AREA : 2.5 M X3.5 M. PLATFORM HEIGHT : 2.1 M. CHUTE F R P THE TOPCOAT IS DONE USING THE BEST QUALITY BRAND OR DULY POWDER COATED. SPIRAL SLIDE SHALL BE CHUTE MADE OF FRP (FIBER REINFORCED PLASTIC / LLDPE (LOW LINEAR DENSITY POLY ETHYLINE) HAVING THICKNESS OF 4MM SLIDE CENTER SUPPORT SHALL BE 80MM NB B LASS GI PIPE. LANDING MODULE SHALL BE SUPPORTED BY 20MM NB B CLASS GI PIPE. SLIDE EXTENSION PLATFORM SHALL BE MADE FROM FRP / LLDPE. THE RAILING SHALL BE MADE FROM 15MM NB AND 20NN NB B CLASS GI PIPE. ALL PIPES SHALL BE COATED WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)
7
SUPPLY & INSTALLATION OF MULTIPURPOSE PLAY SYSTEM (3 NOS. SQUARE DECK) SQUARE DECK WITH CANOPY 5FT.: 3 NOS. MAIN PILLAR PIPES MADE UP OF 80 MM NB B CLASS G.I. PIPES. HEIGHT : 1.5 MTR FROM GL. PLAIN BRIDGE MADE UP OF FIBER REINFORCE PLASTIC MATERIAL. 2.4X1.0X0.15MTR (LXWXH). FLAG : 3 NOS. MADE FROM FRP MATERIAL 0.2MTR H X0.3MTR L. FRP TUNNEL : 1 NOS. WAVE SLIDE (1.5 M) : 2 NOS. WAVE SLIDES MADE UP OF FIBER REINFORCE PLASTIC MATERIAL . 3.0 MTR LENGTH X 0.5 MTR WIDTH. ROTO RAILING : 9 NOS. RAILINGS ARE THE ROTO MOLDED ARTICLES MADE OF ROTO MOUDED PLASTIC MATERIAL. 0.76MTR H X 0.66MTR L X 0.05MTR W. SPIRAL SLIDE(1.5 M) : 1 NOS. SPIRAL SLIDE MADE UP OF FIBRE REINFORCED PLASTIC MATERIAL. HEIGHT : 1.5 MTR AND 4.0 MM THICK. STEP LADDER : 1 NO. STEP LADDER WITH MAIN FRAME MADE OF G.I PIPE OF 32MM AND HANDLE OF 25MM WITH SIX NOS. STEPS MADE OF GI SHEET. 0.4 MTR L X1.0MTR W X1.50 MTR HT. BRIDGE : 1 NOS. PLAIN BRIDGE MADE UP OF FIBER REINFORCE PLASTIC MATERIAL. 2.4X1.0X0.15MTR (LXWXH). NET CLIMBER : 1 NO. FRP BOX SLIDE 1 NO. OF 1.50 MTR. HEIGHT MADE UP OF FIBER REINFORCE PLASTIC MATERIAL. 3.0 MTR LENGTH X 0.5 MTR WIDTH. STRUCTURE BUILD WITH CO2 WELDING PROCESS WITH CONTROLLED PARAMETERS. FIBER REINFORCE PLASTIC MOULDINGS WITH RESIN, COLOR PIGMENT CSM MAT. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS. THE HOLDING DOWN/FIXING OF EQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)
8
SUPPLY AND FIXING OF SIGN BOARDS OF 0.91 X 0.61M SIZE WITH SUPPORT LENGTH OF 3000 MM. MANUFACTURING, SUPPLYING AND FIXING OF RETRO REFLECTIVE SIGN BOARDS MADE OF 2 MM THICK ALUMINUM SHEET FACE TO BE FULLY COVERED WITH HIGH INTENSITY ENCAPSULATED TYPE HEAT ACTIVATED RETRO REFLECTIVE SHEETING CONFORMING TO TYPE – IV OF ASTM-D 4956-01 IN GREEN AND SILVER WHITE INCLUDING SUBJECT MATTER, MESSAGE (BILINGUAL(, SYMBOL AND BORDERS ETC AS PER IRC: 67-2001, PASTED ON SUBSTRATE BY AN ADHESIVE BACKING WHICH SHALL BE ACTIVATED BY APPLYING HEAT AND PRESSURE CONFORMING TO CLASS -2 OF ASTM-D-4956-01 AND FIXING THE SAME WITH SUITABLE SIZED ALUMINUM ALLOY RIVETS @ 20 CM C/C TO BACK SUPPORT FRAME OF M.S ANGLE IRON OF SIZE 35X35X5 MM AND M.S FLAT OF 25X5 MM ALONG WITH THEFT RESISTANT MEASURES, MOUNTED AND FIXED WITH 2 NOS. CLAMP OF MLS FLATS OF SIZE 25X5 MM TO A VERTICAL POST OF 3 MTR HEIGHT MADE UP OF MSL PIPE OF 60 MM N.B WELDED WITH TWO HOLD FAST OF M.S ANGLE 25X25X3MM OF 30CM LENGTH EACH AT BOTTOM AND INCLUDING MAKING HOLES IN PIPES, ANGLES, PROVIDING & FIXING M.S MESSAGE PLATE OF REQUIRED SIZE, STEEL WORK TO BE PAIRED WITH TWO OR MORE COATS OF SYNTHETIC ENAMEL PAINT OF REQUIRED SHADE AND OF APPROVED BRAND AND MANUFACTURE OVER A PRIMING COAT OF ZINC CHROMATE YELLOW PRIMER (VERTICAL POST TO BE PAINTED IN BLACK/WHITE/GREY COLOR) BACKSIDE OF ALUMINUM SHEET TO BE PAINTED WITH TWO OR MORE COATS OF EPOXY PAINT OVER AN APPROPRIATE PRIMING COAST INCLUDING ALL LEADS AND LIFTS ETC. COMPLETE AS PER DRAWING, SPECIFICATION (AS PER DIRECTION OF OFFICER IN CHARGE.) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
