|
| 1 | Demolition of cement concrete in sunken portion any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 2 | M&L 15mm thick cement mortar (1:4) with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement complete all as specified and directed.Note:- WPC shall be measured and paid for separately. |
| 3 | Supply only water proofing compound. |
| 4 | M&L for water proofing treatment to sunken floors of Kitchen, toilets, laboratories, bath and WC's etc shall be as under :- (i) Application of two components of Acrylic modified Cementitious coating(aa) Clean the RCC Surface with wire brush and chisel out and mortar sticking to Surface(ab) Apply FOSROC NITOPROOF 600 PF (min 0.8mm dft) over a priming coat of NITOPROOF WB Primer or equivalent of ASIAN PAINT/SIKA/BERGER/PIDILITE DR FIXIT(ac) Provide HDPE 1.0mm thick Sheet before laying of any floor finishes. |
| 5 | M&L PCC 1:5:10, type E-2 (using 40 mm graded stone aggregate ) as in filling under sunken portion complete all as specified and directed. |
| 6 | M&L 25 mm thick PCC (1:2:4), type B1 (using 20 mm graded stone aggrigate) as in floor finished even and rough to receive top layer complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.Note:- Dismentling floor tile to be done only on sunken area and wall tile to be dismentled where GI pipe line replaced. |
| 8 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour over and including a screed layer of 15mm thick in cement mortar 1:6 complete all as specified and as directed. |
| 9 | M&L Non-skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 Sqm but not exceeding 0.18Sqm as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and including backing with 10 mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 10 | M&L 350mmx 250mm / 450mmX 350mm & 7mm thick glazed coloured (Digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc., including 10mm thick rendering in cement mortar 1:4 on brick or concrete surface finished rough to received dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade with cement mortar bedding and removing off the premises complete all as specified and directed. |
| 11 | M&L machine cut kota stone slab flooring 20-25 mm thick over and including15 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete all as specifed and directed complete all as specified and directed. |
| 12 | M&L Kota stone slab 20-25 mm thick in skirting, etc over and including 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete all as specifed and directed. |
| 13 | Taking down chowkhat with shutter exceeding 1.50 Sqm but not exceeding 4 Sqm ( without taking off shutter) each complete all as specified and directed. |
| 14 | S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and directed. |
| 15 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Makes: Rajshri or equivalent in approved makes. |
| 16 | M&L Pressed steel frames made of 1.25mm thick MS sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. |
| 17 | M&L Pressed steel frames made of 1.25mm thick MS sheet of profile 125mmx60mm for door and window frames with double rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. |
| 18 | M&L Cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats,bed blocks, coping etc including necessary form work complete all as specified and directed. |
| 19 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 20 | M&L welding in repairs exceeding 6mm but not exceeding 9 cm in length, thickness of metal to be welded complete all as specified and directed. |
| 21 | S&F 40mm thick flush door shutter of solid core construction with particle board core both faces are covered with decorative face veneer with lipping /frame to match complete all as specified and as directed. |
| 22 | S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 23 | S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 24 | S&F 150mm Extruded aluminium alloy handle complete all as specified and directed. |
| 25 | S&F in repair 300 mm Mild steel helical door spring including roller and roller plate complete all as specified and directed. |
| 26 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring as fixed in repairs complete all as specified and as directed. |
| 27 | S& F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed. |
| 28 | S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed. |
| 29 | S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed. |
| 30 | S&F Powder coated of ( any colour ) aluminium window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc complete all as specified as per manufacturers instructions.Note: EPDM Rubber beading/gasket measured and paid for seperatley. |
| 31 | S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed.. |
| 32 | S&F 5.5mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 sqm each pane complete all as specified and directed. |
| 33 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed by Engineer-in-Charge. |
| 34 | Demolition of boarding of any description and in any position complete all as specified and directed. |
| 35 | S&F in repair 16-18 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessories (magnetic catcher, knobs) as in shelves/shutters with rebates fixed on PVC on three sides as in supporting block to shelves n complete all as spd and directed by Engineer in charge Makes : Rajshree, Echon or equivalent in approved makes. |
| 36 | S&F in repair using prelaminated partical board of 18/19 mm thick one side decorative face of exterior grade as in wardrobe and cup board shutters and Shelves etc complete all as specified and directed. |
| 37 | S&F Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and directed. |
| 38 | S&F in repairs 40mm dia, cupboard brass knob fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 39 | Dismantling plain or corrugated steel sheet/fibre sheet on roof covering complete all as specified and directed. |
| 40 | S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J- type or L- type hook bolts complete all as specified and directed. |
| 41 | S&F brass CP 20mm dia tabular towel rail, 600mm long between flanges as fixed in repairs and all as specified and directed. |
| 42 | S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 43 | S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 44 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 20 mm dia complete all as specified and directed. |
| 45 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed 15 mm dia complete all as specified and directed. |
| 46 | S&F hot and cold wall mixer Non Telephonic /Non Over head shower type arrangement with connecting legs and wall flanges as fixed in repairs and all as specified and directed by Engineer-In-Charge.Makes:-Jaquar Cat No: FLR-5219 N; CERA Cat No:F2004405 or techno-commercially equivalent in approved makes. |
| 47 | S&F in repairs 15mm CP wash basin mixer for mixing hot and cold water screwed down for iron pipe and fixed and waste system with 450mm long braided hoses complete all as specified and directed. |
| 48 | S&F 15mm dia CP Sink cock swan neck regualar spout with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed Makes Prayag Cat No 9214 or techno-commercially equivalent in approved makes. |
| 49 | S&F 15 mm fancy type CP Stop cock with long shank and cup (concealed type) screwed down, high pressure with crutch handle both end screwed for iron pipe or union as fixed in repairs all as specified and directed. |
| 50 | S&F Corner glass shelves 300 mm radius, 8mm thick as per sample radius for bath room, fixed on suitable support of brass chromium plated clips complete all as specified and directed. |
| 51 | S&F replacement of pressure JET for EWC including PVC connection and CP fitting as fixed in repairs complete all as specified and directed. |
| 52 | S&F in repair chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed. |
| 53 | S&F 20mm dia steel curtain rod with fancy type brackets (steel) including with all fittings as fixed in repairs complete all as specified and directed. |
| 54 | S&F in repair 125mm dia CP grating doom fixed over trap with cement complete all as specified and directed. |
| 55 | S&F in repairs PVC connection 450mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed. |
| 56 | S&F in repair vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair ccomplete all as specified and directed. |
| 57 | S&F 10 litres capacity of Low level PVC flush Cistern as fixed in repairs and including of 32mmdia PVC flush pipe to connect from flush cistern to water closet ( any pattern) and making good all the Joints complete all as specified and directed. |
| 58 | S&F in repairs, Vitreous china wash hand basin, white flat back size 550mmx400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed. Makes : Hindware/Cera- Ist quality |
| 59 | S&F Brass chromium plated bottle trap 32mm dia for wash basins with inlet or outlet screwed for pipe or connections including necessary packing,union,cap and fixed complete all as specified and directed. |
| 60 | S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair complete all as specified and directed. |
| 61 | S&F PVC waste pipe of standard pattern, not less than 75cm long , 32/40mm dia for steel sink waste coupling or urinal of suitable size complete all as specified and directed. |
| 62 | S&F Toilet paper holder of brass, chromium plated or stainless steel fixed in repair to walls with chromium plated (CP) brass screwscomplete all as specified and directed. |
| 63 | S&F 8 to 10 mm thick bevelled edge mirror of selected quality glass edges to be polished and rounded , on fixed to wall with wooden plugs with chromium plated brass screws and cup washers as fixed in repairs complete all as specified and directed. |
| 64 | S&F Stainless steel soap dish (not less than 1mm thick) of type as directed,fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified and directed. |
| 65 | S&F of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors extra over for provision of extra fitting ccomplete all as specified and directed. |
| 66 | Fixing special fiiting CPVC 16mm Brass Elbow ® complete all as specified and directed. |
| 67 | Fixing special fiiting CPVC 16mm M Brass Tee ® complete all as specified and directed. |
| 68 | Fixing special fiiting CPVC 16mm Male Brass Threaded Adapter (FTA/MBTA) complete all as specified. |
| 69 | Fixing special fiiting CPVC 16mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 70 | Fixing special fiiting CPVC 16mm Tank Adaptor complete all as specified and directed. |
| 71 | Fixing special fiiting CPVC 16mm UNION complete all as specified and directed. |
| 72 | S&F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 15 mm dia including taking up or down old steel tubing complete all as specified and directed. |
| 73 | S&F galvanised steel tubing, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 20 mm dia including taking up or down old steel tubing complete all as specified and directed. |
| 74 | M&L Flush pointing to roof tiles in cement mortar (1:3) tiles including racking out joints complete all as specified and directed. |
| 75 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 76 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed. |
| 77 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed. |
| 78 | S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 79 | S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 80 | S&F 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed. |
| 81 | S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 82 | S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 83 | S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed. |
| 84 | S&F in repair ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. |
| 85 | S&F Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed. |
| 86 | Taking down cement plaster any description on brick or stone walls, /RCC walls surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & as directed. |
| 87 | M&L 10 mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed. |
| 88 | M&L Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or conrete surfaces, surfaces finished even and fair complete all as specified and directed. |
| 89 | M&L Rendering 5mm thick in cement mortar (1:3) on in ceiling, soffits of chajja or similar location any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, etc complete all as specified and directed. |
| 90 | M&L Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer and applying a coat of 1mm thick wall care putty complete all as specified and directed. |
| 91 | M&LPreparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkaliresistant priming paint complete all as specified and directed. |
| 92 | M&L Preparation of new plastered surfaces and applying three coats white washing on ceiling surfaces complete all as specified and directed. |
| 93 | M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide zink primer on steel surfaces complete all as specified and directed. |
| 94 | M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 95 | M&L Preparation of old wooden or wood based surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 96 | M&L Preparation of old steel surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 97 | M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying two coat of white wash on walls including cornices complete all as specified and directed. |
| 98 | M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling complete all as specified and directed. |
| 99 | M&L Complete removal of existing treatment and preparing old decorated surfaces (Plastered or unplastered ) by brooming down or steel wire brushing scrapping down smoke soot,moulds moss and efflorescent salts and trading oil and greasy spots etc apply after finishing wall surface with birla wall care putty /JK wall care putty 1mm thick to get fair finish on wall applying two coats of oil bound distempered over a coat of primer on plastered surfaces complete all as specified and directed.. |
| 100 | M&L Complete Removal of existing treatment of walls applying two coats of cement based paint on plastered surfaces complete all as specified and directed. |
| 101 | S&F 15 mm fancy type CP Stop cock with long shank and cup (concealed type) screwed down, high pressure with crutch handle both end screwed for iron pipe or union as fixed in repairscomplete all as specified and directed. |
| 102 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and directed. |
| 103 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match with the existing specifications complete all as specified and directed. |
| 104 | M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC concealed conduit /surface conduit with all accessories if require such as bends, reducers, spacers, saddles, junction boxes, Bakelite sheets, wooden rectangular boards/round blocks (for housing lamp holder and light fittings etc) and MS pressed steel/cast iron sunken boxes of suitable size for mounting switches/bell pushes/sockets/fan regulator etc covered with new 3 mm thick laminated Bakelite sheet top cover including continuous earth wire of size 1.5 Sqmm unsheathed stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch 6 Amp. |
| 105 | (b) One 3 pin socket outlet 5/6 Amp on the same board controlled by one single pole one way switch 6A. |
| 106 | (c) One 5/6 Amp socket outlet independent controlled by one single pole 6 Amp switch. |
| 107 | All as per Srl Item No 104 here-in-before but one three pin 6/16 Amps socket outlet on the independent board with 2.5 Sqmm PVC insulated copper conductor and 2.5 sqmm copper conductor for continuous earthing complete all as specified and directed. |
| 108 | All as per Srl Item No 105 here-in-before but existing conduit and existing MS pressed steel/ cast iron box complete all as specified and directed.(a) One light point/fan/bell point controlled by one single pole one way switch 6 Amp. |
| 109 | (b) One light point controlled by two 2-way switches 6 A, with cables 1.5 sq. mm size |
| 110 | (c) One 6 Amps socket outlet independent controlled by one single pole 6 Amp switch. |
| 111 | S&F new MS pressed steel/cast iron sunken boxes rectangular block in replacement of old rusted sunken box. The MS Pressed Steel/ CI Box shall be galvanised or painted black with two coats of black bituminous paints or any other paint as indicated .The MS pressed steel/cast iron sunken boxes should be suitable for mounting of normal/modular switches, sockets, fan regulator etc and the item rate quoted also including making good the disturbed surfaces to match with the existing surface. The new MS pressed steel/cast iron sunken boxes suold be of following sizes with suitable thickness as per IS Code complete all as specified and directed.(a) 8\\" x 5\\" and Suitable for Main switch board |
| 112 | (c) All as per item No 11 but of size 5\\"x5\\" and Suitable for 05 Amp Independent board. |
| 113 | S&F bakelite sheet hylam 3mm thick of white top fixed with cup washers, machine screws on new/existing MS Shuken box including removing existing switch/ switch sockets/ bell push etc and refixing the only serviceable switchs/socket by making slots on new sheet complete all as specified and directed.(a) Min size 8'' x 5\\" and Suitable for 15 Amp Independent board. |
| 114 | (c) All as per item No 14 but of Min size 5'' x 5\\" and Suitable for 05 Amp Independent board. |
| 115 | S&F Switch piano flush type 6 Amps, one way complete all as specified and directed. |
| 116 | S&F Switch piano flush type 16 Amps, one way complete all as specified and directed. |
| 117 | S&F Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and directed. |
| 118 | S&F Socket outlet, 2 in 1, 6 pin 6 and 16 Amps piano flush type complete all as specified and directed. |
| 119 | S&F Switch piano flush type 6 Amps, two way complete all as specified and directed. |
| 120 | S&F in repair Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65mm x 50mm, 3 terminals complete all as specified and directed. |
| 121 | S&F in lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including 9 W LED bulb complete all as specified and directed. |
| 122 | S&F in repair stepped type electronic fan regulater (Socket/switch type), flush type on the existing phenolic laminated sheet etc. as required complete all as specifed and directed. |
| 123 | S&F in repair bell push piano flush type 6 Amps single pole complete all as specified and directed. |
| 124 | S&F in repair bell AC 230 volts single pole complete all as specified and directed. |
| 125 | S&F in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed. |
| 126 | S&F in repair MCB single pole neutral (SPN) 240 volts, 20 to 40 Amps, 10 KA complete all as specified and directed. |
| 127 | S&F MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. |
| 128 | S&F MCB TPN 415 volts 63 Amps, 10 KA breaking capacity complete all as specified and directed. |
| 129 | S&F in repair LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.Makes: Cat Part No LHEXBLP7PN1W020 of make \\"Havells \\"or techno-commercially equivalent in approved makes. |
| 130 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200/250mm complete all as specified and directed.Note : Taking down of unserviceable exhaust fan PVC shall be deposited at AGE E/M Yard by the contractor without any extra cost. |
| 131 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified.Note : Taking down of unserviceable exhaust fan iron body shall be deposited at AGE E/M Yard by the contractor without any extra cost. |
| 132 | S&F in repair sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia or techno-commercially equivalent in approved makes.Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length). |
| 133 | All as per Srl Item No 132 here-in-before but 4 Sqmm submain wiring. |
| 134 | S&F sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed. Please Enable Macros to View BoQ information |
