|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (I) R&D CHANDIPUR Name of Work: Repairs to roof treatment, sunken floor, flooring, ATT,tiling, AC sheet roofing with galvalume sheet, plumbing and certain allied works at Balasore. Contract No: GE(I)R&D/BLS/ 2026-27 Bidder Name : SCHEDULE 'A' (BOQ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Work / Item Item Code / Make Number or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE (including all Taxes as specified in tender Documents) In Figures To be entered by the Bidder Rs. Ps. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. |
| 3 | M&L rendering 10 mm thick cement plaster in CM (1:4) on fair faces of brick work for fixing of wall tiling complete all as specified and directed. |
| 4 | M&L for 15 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes for non skid ceramic and grinaite tiles complete all as specified and directed. |
| 5 | M&L Glazed ceramic coloured tiles 450X 300X 7mm thick set coloured tiles as in dado, skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles complete all as specified and directed. |
| 6 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed. |
| 7 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed. |
| 8 | Ditto all as per item 6 but in skirting complete all as specified and directed. |
| 9 | M&L for vertified ceramic tiles 8 to 9 mm thick light shade (Square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified. |
| 10 | Ditto all as per item 8 but in skirting complete all as specified and directed. |
| 11 | M&L for Granite (of any type) work (table rubbed and polished) 20-22 mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, all asspecified and as directed by Engineer in charge. |
| 12 | S&F fixed in repairs Grating doom 125 mm dia size of PTMT (minimum weight 40gms) complete all as specified and directed. |
| 13 | S&F PVC connection of 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed. |
| 14 | S&F in repairs 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed. |
| 15 | S&F in repairs wash down water closet (EWC) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed. |
| 16 | S&F in repairs Vitreous china Squatting pan Orissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed. |
| 17 | S&F vitreous china wash basin, white, flat back size 550x400mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but incl brackets, waste pipe, waste coupling in repairs complete all as specified and directed. |
| 18 | S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed. |
| 19 | S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed. |
| 20 | S&F in repair 75mm bore PVC (SWR) junction single (Single \\"T\\") equal or unequal with access door complete all as specified and as directed. |
| 21 | All as per item No 19 above but 110mm complete all as specified and as directed. |
| 22 | S&F in repairs 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 23 | All as per item No 21 above but 110mm complete all as specified and as directed. |
| 24 | Taking down of steel tubing 15mm dia of pipe and connections complete all as specified. |
| 25 | All as per item No 23 above but 20 mm complete all as specified and as directed. |
| 26 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 27 | All as per item No 25 above but 25mm outer dia complete all as specified and as directed. |
| 28 | Cutting chases, pinning in. making good to facings where required & pointing in cement mortar CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing etc., and making good, cutting not exc 15 cm girth complete all as specified and as directed. |
| 29 | S&F in repair 15mm dia fancy type CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down fixed in repairs. |
| 30 | S&F in repairs 15mm dia fancy type CP pillar taps, cast copper alloy with capstan head, chromium plated screwed down fixed high pressure, long screwed shanks and fly nuts, screwed for iron pipe in repairs. |
| 31 | S&F in repairs 15 mm dia CP concealed type stop valves/ angular stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions in repairs. |
| 32 | S&F in repair health faucet Abs with Double lock 1.2 meter stainless steel flexible hose andwall hook all as specified and directed by Engineer in charge. |
| 33 | S&F in repairs two way Bib cock/tap, fancy type, chromium plated, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe complete all as specified and directed. |
| 34 | Dismantling timber scantlings 40 sq. cm and over in section, in any position |
| 35 | Taking down asbestos cement corrugated or semi corrugated sheet in roof covering complete all as specified and directed |
| 36 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 |
| 37 | M&L for applying two coat of synthetic enamel paint on new steel surface over a coat of red oxide incl preparation of surface of any description over 10 cm width or girth. |
| 38 | M&L 0.50 mm thick pre painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour as in roof covering with self tapping screws as specified. |
| 39 | M&L 0.50 mm thick pre painted galvalume aluminium zinc coating GI based Plain steel sheet of any colour as in roof covering with self tapping screws as specified. |
| 40 | Taking out existing roof treatment and taking out existing plaster including PCC, brick soling if any and wire brushing and cleaning the existing surface with water etc and removing rubbish to a distance not exceeding 1.50 Km all as specified and as directed. |
| 41 | M&L for 25mm thick PCC (1:2:4), type B-0, (using 12.5mm graded stone aggregate) complete all as specified. |
| 42 | M&L for 3mm thick APP modified non-woven polyester reinforced bituminous membrane with mineral slate granules and flexible at -2 °C (Sika shield P 24 MG or equivalent) water proofing membrane weight not less than 3 Kg/sqm including one coat of bituminous primer for bitumen membrane @ 0.4 lit/sqm over plaster surface. Over the primer coat the membrane shall be laid using butane torch and sealing all the joints etc complete all as specified and directed. Note : The laying of membrane shall be got done through the authorised applicator of the manufacturer. |
| 43 | M&L for 15 mm thick screed bed on brick work or concrete surfaces in cement mortar (1:4) finished surfaces even and smooth with WPC complete all as specified and as directed. (Note : WPC shall be measured and paid separately) |
| 44 | M & L for removing the plant from walls & roof of the building with complete roots, applying recommended chemicals to prevent further growth as directed, making good the disturbed surface with PCC 1:2:4 and CM 1:3 and applying surface finishs to match the existing surface including removal of debris etc outside the premises complete all as rqd and specified. |
| 45 | Demolition of brick work built in cement mortar incl quoin, arches etc complete all as specified and directed. |
| 46 | M&L for brick work with flyash bricks old size, straight or curved on plan exc 6 m mean radius built in cement mortar CM (1:6) etc complete all as specified & directed. |
| 47 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 48 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar CM (1:6) and finished even and smooth without using extra cement complete all as specified. |
| 49 | M&L for 5 mm thick cement plaster in cement mortar CM (1:3) of ceiling, finished even and smooth with out using extra cement complete all as directed. |
| 50 | M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar CM (1:4) finished surfaces even and smooth complete all as specified and as directed. |
| 51 | M&L three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed. |
| 52 | M&L for preparation of new plastered surfaces of walls applying 1mm thick wall care putty to achieve smooth surface rubbing with sand paper and applying two coats of acrylic distemper over a coat of alkali-resiatant primer complete all as specified and directed. |
| 53 | M&L for Finishing walls with Acrylic Smooth exterior coat paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 54 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 Km complete all as specified and as directed. |
| 55 | M&L for rendering 10mm thick in cement mortar CM (1:4) on internal wall brick / concrete surfaces, finished even and smooth without using extra cement |
| 56 | M & L for applying evenly a priming/tack coat with bituminous primer at 10 Kg per 10 Sq.m complete all as specified. |
| 57 | M&L for Sand filling under sunken floors or in foundations including watering and consolidation all as specified and directed. |
| 58 | M&L for PCC (1:5:10) type E-2, using 40mm graded aggregate as in filling in Sunken floor complete all as specified and as directed. |
| 59 | M&L for 30mm thick PCC (1:2:4), type B-0, using 12.5mm graded aggregate as in sunken floor flooring complete all as specified and as directed. |
| 60 | Supply only integral water proofing compound (ISI marked) of approved make. |
| 61 | Disconnecting existing 500 or 1000 ltr tanks, setting aside (or lowering if required) for repairs and sifting to other place incl all required dammaged part of tanks, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. |
| 62 | M&L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc |
| 63 | Demolition of unserviceable RCC over head tank (reinforcement cut as required to facilitate demolition) concrete of any description and in any position not otherwise specifically provided and remove the debris from the site complete all as specified and directed. |
| 64 | M&L 75 mm thick Cement concrete type C-1, (1:3:6) (using 20mm graded aggregate) with water proofing compound for PVC water tanks complete all as specified and directed. |
| 65 | Dismantling water tanks of capacity exc 250 and n. exc 500 ltrs capacity. |
| 66 | S&F 500 litre capacity rotational moulded polythylene tripple layer water storage tank with cover and suitable locking arrangement (cylindrical vertical with closed top) hoisted and fixed in position all as per specified in SSR part-I. |
| 67 | S&F PVC ball valves high pressure with polythene float and fly nut complete, screwed for iron pipe of 20mm bore all as directed. |
| 68 | S&F in repair 20 mm CPVC Ball Valve (Gate Valve) all as per specified and directed. |
| 69 | S&F in repair 25 mm CPVC Ball Valve all as per specified and directed. |
| 70 | M&L for Anti Termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as per specified and directed. |
| 71 | M&L for post Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc all as per specified and directed. |
| 72 | Dismantling of ceiling boards (fibre, Pulp, Insulation) of any thickness, including cover fillets all as specified and as directed. |
| 73 | Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in unframed work. |
| 74 | S & F false ceiling grid using Anodised aluminium snap grid frame work for false ceiling as per manufacturer instruction with and including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with screws, including hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engineer in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
