|
| 1 | Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed. |
| 2 | M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet(AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type bolt complete all as specified and directed. |
| 3 | M & L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150)of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J-type bolt/L-type bolt complete all as specified and directed. |
| 4 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed. |
| 5 | M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed. |
| 6 | S & F Solid PVC wall lining consisting of 5 mm thcik plain/wood grain printed colour PVC sheet inclusive cement and fixing at ste on PVC frame complete all as specified and directed. |
| 7 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame complete all as specified and directed. |
| 8 | Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed. |
| 9 | M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed. |
| 10 | Taking down door / window frame with shutter (without taking of shutter from the frame ) area n. exc 1.50 sqm complete all as specified and directed. |
| 11 | Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed. |
| 12 | Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 14 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and complete all as specified and directed. |
| 15 | S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 16 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading. but wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighte firmly complete all as specified and directed. |
| 17 | Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 18 | Hacking out old broken glass (any thickness size and quality and description) from wooden/steel/aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed |
| 19 | S&F 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each panecomplete all as specified and directed. |
| 20 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 21 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 22 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 23 | S&F Butt hinges medium weight cold rolled stainless / Mild steel 100mm size complete all as specified and directed. |
| 24 | Supply & fixing 150mm Aluminium barrel tower bolts, fixed complete all as specified and as directed |
| 25 | Supply & fixing 150 mm Aluminium pressed handles fixed complete all as specified and directed. |
| 26 | S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 27 | S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished complete all as specified and directed. |
| 28 | S & F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as spd. (thickness or powder coating not less than 50 micron) complete all as specified and directed. |
| 29 | S&F powder coating aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing,02 Nos handles, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron)Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 30 | S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron)Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 31 | S&F powder coated aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed.(thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 32 | Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 33 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed. |
| 34 | Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed. |
| 35 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 36 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 37 | Material & labour for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified. |
| 38 | Materials and labour for light shade vitrified ceramic tiles 7-10mm thick (square/rectangular), polished, area of each tiles n.exc 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed. |
| 39 | Materials and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles n.exc 0.36 sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified. |
| 40 | Demolition of stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc complete all as specified and directed |
| 41 | S&F pre-polished granite 20mm thick fixed on platform/shelves/steps/cill over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as directed. |
| 42 | Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 43 | M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed. |
| 44 | M&L 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in subbase complete all as spd and directed. |
| 45 | M & L for chequered tiles rubber pressed glossy finish (any colour) 40 cm x 40 cm x 35 mm thk ,set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 50 mm screed bedding in cement mortar (1:4) complete all as specified and directed |
| 46 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as complete all as specified and directed. |
| 47 | M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 48 | All as per item No 47 here-in-above but half brick wall in CM 1:4 complete all as specified and directed. |
| 49 | Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed |
| 50 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 51 | Material & labour for Rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed.(WPC shall be measured and paid separately.) |
| 52 | Supply only liquid water proofing compound complete all as specified and directed. |
| 53 | M&L Rendering 5 mm thick on fair faces of brick work or concrete surfaces with CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 54 | Preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of Chalk whiting all as specified and directed. |
| 55 | M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed. |
| 56 | M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed |
| 57 | M&L for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed. |
| 58 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed |
| 59 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed |
| 60 | S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed. |
| 61 | Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed. |
| 62 | Supplying and laying of CPVC pipes 16 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 63 | Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 64 | S & F Brass elbow 16 mm for CPVC Pipes complete all as specified and directed |
| 65 | S & F Brass Elbow 20 mm for CPVC Pipes complete all as specified and directed |
| 66 | S & F Brass Tee 16 mm for CPVC Pipes complete all as specified and directed |
| 67 | S & F Brass Tee 20 mm for CPVC Pipes complete all as specified and directed |
| 68 | S & F Brass union 16 mm for CPVC Pipes complete all as specified and directed |
| 69 | S & F Brass union 20 mm for CPVC Pipes complete all as specified and directed |
| 70 | Supply & fixed in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device,complete all as specified and directed. |
| 71 | S & F in repairs vitreous china white squatting pan \\"Orissa Pattern\\" size 580x440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor complete, all as specified and directed. |
| 72 | S & F 32 mm dia PVC waste pipe fixed in repairs complete all as specified and directed. |
| 73 | S&f in repair Vitreous China wash basin, white,with padestal flat back, size 540x400mm excluding ditto but including brackets and padestal etc all as specified and directed. |
| 74 | S & F White vitreous china laboratory sink size size 600x450x200mm complete all as specified and directed |
| 75 | S & F in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified. |
| 76 | S&F in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified |
| 77 | S&F in repair pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. |
| 78 | Supply and fix Swan neck central hole basin mixer with hot/cold connection without pop up waste system complete all as specified and directed. |
| 79 | S&F in repair Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwedshanks and fly-nuts,fancy type screwed for iron pipe and fixed, complete all as specified and directed. |
| 80 | S & F in repairs chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe complete all as specified and directed. |
| 81 | S&F in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head,complete all as specified and directed. |
| 82 | S&F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and directed. |
| 83 | S&F in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed. |
| 84 | S&F in repairs 2-way bib cock with flange 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and directed. |
| 85 | S & F Health faucet (ABS Body) mild steel chromium plated suitable 15 mm dia pipe with 1.25 mtr long flexible tube and ABC Wall hook including making connection and fixed in position complete all as specified and directed. |
| 86 | S & F in repair jet spray (butterfly) with 1.5 mtrs tube with complete all accessories complete all as specified and directed. |
| 87 | S &F Tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed. |
| 88 | S&F in repairs towel rack complete all as specidied and directed. |
| 89 | S&F in repair PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed. |
| 90 | S&F as in repair stainless steel kitchen plate rack of size 80x55x20 cm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed. |
| 91 | S & F waste fitting, 32 mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut complete all as specified and directed. |
| 92 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed. |
| 93 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solventcement complete all as specified and directed. |
| 94 | S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed. |
| 95 | S&F in repair CP grating doom with waste hole of size 125mm dia complete all as specifed and directed complete all as specifed and directed. |
| 96 | S & F in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed. |
| 97 | S&F in repair PVC (SWR) Bends any radius for 110 mm bore complete all as specified and directed |
| 98 | S&F in repair PVC (SWR) Bends any radius for 75 mm bore complete all as specified and directed |
| 99 | S&F in repair PVC (SWR) vent cowl 110mm bore complete all as specified and directed |
| 100 | Dismantling water tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description complete all as specified and directed |
| 101 | Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed |
| 102 | S & F 500 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed. |
| 103 | S & F 1000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed. |
| 104 | S&F in repair 15 mm bore ball valves. high pressure of PTMT with apoxy coated aluminum rod & heigh dencity plastic ball screwed for iron pipe and fixed. (Minum wt 15mm-142 gms/20mm-210g complete all as specified and directed.) |
| 105 | S&F in repair 20 mm bore ball valves. high pressure of PTMT with apoxy coated aluminum rod & heigh dencity plastic ball screwed for iron pipe and fixed. (Minum wt 20mm-210g complete all as specified and directed. |
| 106 | M & L Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed. |
| 107 | S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. |
| 108 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed. |
| 109 | S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. |
| 110 | S&F in repairs CP soap dish with glass complete all accessories complete all as specified and directed. |
| 111 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 112 | M & L for PCC 1:2:4, Type B0 (using 12.5 mm graded stone aggregate) 25 mm thick as in sunken floor complete all as specified and directed. |
| 113 | M&L for PCC type E2 1:5:10 (40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed |
| 114 | Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. applying SmartCare Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing , etc, complete as per manufacturers specifications. |
| 115 | S & F in repair 100 mm long SS butt hinges and fixed with screw/welded to frames etc complete all as specified and directed. |
| 116 | Dismantling boarding, any description, fixed in any position with Screw ,complete all as specified and directed. |
| 117 | S& F in repair 18 mm thick Alstone wood Polymer Composive Board ( WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets all as specified all as directed. |
| 118 | S&F 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors, cabinet self,etc complete all as specified and as directed . |
| 119 | S&F in repair Continuous (piano) hinges, SS, bright finish with 30 mm width of flaps (When open), complete all as specified and directed. |
| 120 | S&F magnetic catcher of size 20mmx50mm suitable for cup board shutters complete all as specified and as directed. |
| 121 | M&L 50mm bore GI tubing medium grade laid on sunken floor as on Spot Pipe complete all as specified and directed. |
| 122 | S&F in repair for curtain rails, mild steel, chromium plated with fixing rackets,stops,rollers etc complete all as specified and directed. |
| 123 | Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed. |
| 124 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed. |
| 125 | S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specified and directed. |
| 126 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 72,240.00] Please Enable Macros to View BoQ information |
