|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (I) R&D CHANDIPUR Name of Work: Repairs to wooden joinery, false ceiling, tiling, sanitary fittings, plastering and certain Misc works at Balasore & Nilgiri. Contract No: GE(I)R&D/BLS/ 2026-27 Bidder Name : SCHEDULE 'A' (BOQ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Work / Item Item Code / Make Number or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE (including all Taxes as specified in tender Documents) In Figures To be entered by the Bidder Rs. Ps. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from frame) area not exceeding 1.5 Sqm each complete all as directed. |
| 3 | Taking down PVC chowkhats or frames with shutters (without taking off shutters from frame) area not exceeding 1.8 Sqm each complete all as directed. |
| 4 | Taking down chowkhats or frames with shutters (without taking off shutters from frame) area exceeding 1.5 Sqm and not exc 4 Sqm each complete all as directed. |
| 5 | Taking down shutters of any description area not exceeding 1 Sqm each each all as directed. |
| 6 | Taking down shutters of any description area exceeding 1 Sqm and not exc 2 Sqm each each all as directed. |
| 7 | Resecuring or easening, adjusting without taking down of shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as directed. |
| 8 | Resecuring or easening, adjusting without taking down of shutters of any description not exc 1 Sqm each complete all as directed. |
| 9 | Taking down and refixing shutter after repair of any description n. exc 1 Sqm each in same opening complete all as specified and as directed. |
| 10 | Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed. |
| 11 | M&L 2nd class hard wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed. |
| 12 | M&L for preparing of surfaces of backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m eac treated with tar or coal tar black paint complete all as specified and directed. |
| 13 | Cutting holes for inserting hold fasts in brick walls built in cement mortar and making good disturbed portion in PCC (1: 2 :4) type B1 or in cement mortar (1:3) as required, depth of embedded portion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed. |
| 14 | S&F of mild steel work as in bands, straps, supports or stays for RWP, ventilating pipes, clamps, hold fasts, wall ties conforming to Fe-290 Gde E-165 |
| 15 | S&F 30 mm thick 2nd class hard wood glazed, gauged, skeleton shutter, as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats open rebated and prepare to receive glass, gauge etc divided into squares edges of framing, plain, chamfered or rounded, mitred and rebated sash bars any numbers prepared to receive glass/ gauge and all as specified. |
| 16 | S&F 100mm long Hasp and Staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws. |
| 17 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 18 | S&F 35 mm thick single panel with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces supplied and fitted to chowkats |
| 19 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed. |
| 20 | M&L for two coat of synthetic enamel paint on new steel surfaces of any description incl one coat of red oxide primer, over 10cm width or girth after preparation complete all as specified and directed by Engr in Charge. |
| 21 | M&L preparation of old surfaces and applying one coat of synthetic enamel paint to wooden surfaces over 10 cm width or girth complete all as specified and as directed. |
| 22 | M&L preparation of old surfaces and applying one coat of synthetic enamel paint to steel surfaces over 10cm width or girth complete all as specified and as directed. |
| 23 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters, railings; framework of water tanks and similar work, conforming to Fe.290.Gde-E-165 |
| 24 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and as directed by Engineer-in-charge. |
| 25 | Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube, in opening as per specification and drawing all as specified and directed. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size Frame size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 27 | All as per item No 25 but in Frame size 65 x 100 mm |
| 28 | All as per item No 25 but in Frame size 45 x 70 mm for cup board |
| 29 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: Stainless steel butt hinges and necessary S.S screws shall be measured and paid separately) |
| 30 | All as per item No 28 but in 30 mm thick mosquito proof door shutter |
| 31 | All as per item No 28 but in 18 mm thick Cup Board Shutter |
| 32 | S&F 18-19 mm Venerred decorative plywood, grade1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work complete all as specified and directed. |
| 33 | M&L 2nd class hardwood Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 6 Sqcm but n.exc 13 Sqcm incl 02 coats of synthetic enamel paint over a coat of primer including taking down old fillets all as directed. |
| 34 | S&F for powder coating of minimum thickness 50 micron, Anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified |
| 35 | S&F for powder coating of minimum thickness 50 micron, Anodised aluminium door shutters sliding/openable type, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified. |
| 36 | S&F for powder coating of minimum thickness 50 micron, Anodised aluminium window shutters sliding/openable type and ventilator top hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber neoprene packing, handles 2 Nos in each window, hinges, anodised aluminium snap beading screws etc complete all as specified. (Note : Glass and wire mesh shall be measured and paid separately.) |
| 37 | M&L for 5.00 mm thick Sheet glass, ordinary quality incl necessary fixing all as specified and directed by EIC. |
| 38 | M&L for 3.00 mm thick Sheet glass, ordinary quality incl necessary fixing all as specified and directed by EIC. |
| 39 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire stapple all as directed by EIC. |
| 40 | S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed. |
| 41 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty or securing clips complete all as specified and directed. |
| 42 | S&F in repair 4mm thick Figured glass, pin head type and glazing with oil putty or securing clips complete all as specified and directed. |
| 43 | S&F Pre-laminated particle board with decorative lamination on both sides 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge |
| 44 | S&F 150 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 45 | S&F 150 mm extruded aluminium alloy handles, fabricated type, anodisedcast type, anodised complete all as specified and directed. |
| 46 | S&F aluminium sliding door bolt 250 mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 47 | S&F 100 mm size of Stainless Steel hinges complete all as specified and directed. (ISI Marked) |
| 48 | S&F 75 mm size of Stainless Steel hinges complete all as specified and directed. (ISI Marked) |
| 49 | S&F in repair 15mm dia fancy type CP Pillar taps, cast copper alloy with crutch or butterfly handle, screwed down fixed all as directed. |
| 50 | S&F 100 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 51 | S&F 125 mm extruded aluminium alloy handles, fabricated type, anodisedcast type, anodised. |
| 52 | S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor. |
| 53 | Taking up or down GI water tubing and connecting incl cleaning for refixing or removal to stores for 15mm bore. |
| 54 | Taking up or down GI water tubing and connecting incl cleaning for refixing or removal to stores for 20mm bore. |
| 55 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 56 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 57 | Cutting chases not exc 15 cm girth for concealed water tubing and making good to facings where required and pointing in cement mortar CM (1:3) complete all as specified and directed. |
| 58 | S&F in repair 15mm dia fancy type CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down fixed all as directed. |
| 59 | S&F in repairs 15 mm dia CP angular stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions all as directed. |
| 60 | S&F in repair shower rose fancy type chromium plated 120 mm (minimum) size with swivel joints suitable for 15 mm bore pipe including shower arm chromium plated 15 mm dia, 190 mm (minimum) long complete all as specified and directed. |
| 61 | S&F in repair Brass CP tubular towel rail, 20mm dia, \\"D\\" type, 60 cm long between flanges all as directed. |
| 62 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off the premises. |
| 63 | M&L rendering 10 mm thick cement plaster in CM 1:4 on fair faces of brick work for fixing of wall tiling. |
| 64 | M&L Glazed ceramic coloured tiles 450 x 300 x 7 mm thick coloured tiles as in dado, skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles. |
| 65 | M&L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes for non skid ceramic and grinaite tiles complete all as specified and directed. |
| 66 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed. |
| 67 | Ditto all as per item 65 but in skirting complete all as specified and directed. |
| 68 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 69 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified. |
| 70 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified. |
| 71 | M&L for preparation of new plastered surfaces of walls applying 1 mm thick wall care putty to achieve smooth surface rubbing with sand paper and applying two coats of oil bound distemper over a coat of alkali-resiatant primer complete all as specified and directed. |
| 72 | M&L for preparation of old surfaces of wall and applying two coats of acrylic distemper including a coat of primer including filling of putty for cracks, hole etc complete all as specified and directed. |
| 73 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) |
| 74 | S&F in repair Door closer hydraulically regulated,designation No. 1 universal type, aluminium (Die cast body) suitable for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified and directed. |
| 75 | Dismantling of ceiling boards (fibre, Pulp, Insulation) of any thickness, including cover fillets all as specified and as directed. |
| 76 | Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in unframed work. |
| 77 | S & F false ceiling grid using Anodised aluminium snap grid frame work for false ceiling as per manufacturer instruction with and icluding 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with screws, including hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engineer in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
