|
| 1 | Earth work by mechanical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift (DSR Code 2.2) All kinds of soil (DSR Code 2.2.1) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (DSR Code 4.1) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR Code 4.1.3) |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR Code 4.1.10) |
| 4 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (DSR Code 8.2) Granite stone slab colour black, Cherry/Ruby red (DSR Code 8.2.2) Area of slab upto 0.50 sqm (DSR Code 8.2.2.1) |
| 5 | Chequered terrazzo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : (DSR Code 11.19) Light shade pigment using white cement. (DSR Code 11.19.1) |
| 6 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (DSR Code : 12.41) 110 mm diameter ( DSR Code : 12.41.2) |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR Code: 13.80) |
| 8 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge (DSR Code:15.19) |
| 9 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. (DSR Code :17.22A) |
| 10 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. (DSR Code:17.33) |
| 11 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (DSR Code 17.78) |
| 12 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (DSR Code:18.51) 15 mm nominal bore |
| 13 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : (DSR Code:18.53) 15mm nominal bore |
| 14 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. (DSR Code :18.74) 15 mm nominal bore with 45 cm length. (DSR Code :18.74.2) |
| 15 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. (DSR Code:26.26.1) With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 16 | Providing and fixing C.P. Brass 2 Way Bib Cock with Flage and Health Faucet with 8mm Dia, 1 meter Long Flexible Tube & Wall Hook of approved quality and make as per direction of Engineer-in-charge.(DSR Code : NS.1) |
| 17 | Providing and fixing C.P. Brass Pillar Cock of 140 mm Extention Body, of approved quality and make all complete as per direction of Engineer-in-charge.(DSR Code : NS.2) |
| 18 | Providing and fixing Wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (without Hand & Overhead Shower) of approved quality and make as per direction of Engineer-in-charge.(DSR Code : NS.3) |
| 19 | Providing and fixing C.P. Brass Overhead Shower of minimum size 150x150mm Square Shape Single Flow( Body & face plate Stainless Steel) with rubit cleaning System with C.P. Brass Shower Arm of minimum size 400x25x25mm Squar Shape for wall mounted Shower with flange of approved quality and make as per direction of Engineer-in-charge. (DSR Code : NS.4) |
| 20 | Providing and fixing C.P. brass Hand Shower 100mm Round Shape Sigle flow (ABS Body Chrome plated with Gray Face Plate) with Rubit Cleaning System, Sliding Rail 24mm dia. & 600mm Long Round Shape with Hand Shower Holder and Flexible Tub 8mm dia &1.5M Long with Nuts of approved quality and make as per direction of Engineer-in-charge. (DSR Code : NS.5) |
| 21 | Providing and fixing white vitreous china Table Top wash basin of minimum size 360x360x120 mm with C.P brass waste of standard pattern of approved quality and make as per direction of Engineer-in-charge. (DSR Code : NS.6) |
| 22 | Providing and fixing Stainless Steel Towel Shelf 600 mm long complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and make as per direction of Engineer-in-charge. (DSR Code : NS.7) |
| 23 | Providing and fixing SS Towel ring round shape with concealed fittings arrangement of approved quality and make as per direction of Engineer-in-charge. (DSR Code : NS.8) |
| 24 | Providing and fixing Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses of quality & make as approved by Engineer in charge.(DSR Code : NS.9) |
| 25 | Providing and fixing Towel Rail 600mm Long of approved quality and make as per direction of Engineer-in-charge.(DSR Code :NS.10) |
| 26 | wall to wall shower enclosure with one fixed glass on the side and one Sliding door on other side - 2 parts(Chrome Finish ) (Clear Glass) size 1.33x2.00 Please Enable Macros to View BoQ information |
