|
| 1 | Demolishing R.C.C./PCC work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material at dumpring site to be arranged by contractor at his own llevel and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 2 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of unserviceable material at dumpring site to be arranged by contractor at his own llevel and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 with 20 mm aggrigate including curing charges and excluding cost of form work as per HPPWD specification nd as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 4 | Providing and laying mechanically mixed & vibrated cement concrete 1:3 :6(1cement :3 sand :6 graded stone aggregate 20mm. nominal size) including curing charges and excluding cost of form work as per HPPWD specification nd as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 5 | Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 6 | Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work in Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc., including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 7 | Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 8 | Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 9 | Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (circular or curved in plan), up to all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 10 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all works upto plinth level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 11 | Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all works above plinth level upto floor V level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 12 | Providing and laying Tor steel reinforcement of TATA, sail , Rashtriya Ispat or its substantial equivalent make for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 13 | Kota stone slab flooring 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and mirror polishing etc. complete :-25 mm thick (average) slab size not less than 550mmx550mm including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 14 | Providing and laying heavy duty vitrified tiles of size 600x 600mmx10mm) ( six hundred into six hundred into ten millimeter ) of Nitco or its equivalent tiles in grey / coloured of required approved shade in flooring, treads of steps and landing laid on a bed of 12mm ( twelve millimeters ) thick cement mortar 1:3 ( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment in white cement shade to match the shade of tiles upto all floor level complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 15 | Steel work welded in built up sections including hollow sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint In gratings, framed, guards, bars ladders and railing, brackets, hand rail and similar works of hollow sections including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 16 | Providing and fixing 0.60mm thick TATA Durashine or equivalent prepainted steel sheet of approved brand and shade and design in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of material within all leads and lifts as per direction of Engineer-in-charge:-0.60mm (zero point sixty millimetre) thick sheet. |
| 17 | Providing and fixing ridges or hips or valley 60cm overall with 0.45mm thick TATA Durashine or equivalent prepainted steel sheets of approved brand, shade and design with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 18 | Providing and fixing flashing 38cm overall with 0.45mm thick TATA Durashine or equivalent prepainted sheet of approved brand shade and design with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 19 | Providing and fixing 30cm wide 120cm overall Box type gutter with 0.45mm thick TATA Durashine or equivalent prepainted sheet of approved brand shade and design with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating gutter fixed with bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design (frame work to be measured and paid for separately). including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 21 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:3 (1 cement :3 coarse sand as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 22 | 6mm Cement plaster to ceiling a) In Cement mortar 1:3(1 Cement:3 Sand) as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 23 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1Cement:6 Sand) as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 24 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 (1 cement:6 sand). as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 25 | Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position in Second class deodar wood including carriage of material in all leads and lifts as per HP.PWD specification 1990 Volume-1 including carriage of materials, labour tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.a) Second Class Teak Wood |
| 26 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 27 | Providing and fixing expansion hold fasteners on C.C./R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 28 | Painting two coats (excluding priming coat on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters :- as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 29 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 30 | Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 31 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 32 | Finishing wall with weather proof exterior grade emulsion of approved design (Apex ultima) or its eqivalant on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foeign matter etc. including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 33 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 34 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 35 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. : (a) 300x 16 mm |
| 36 | Providing and fixing aluminium tower bolts( berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads and lifts. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. (a) 200x10mm |
| 37 | Providing and fixing aluminium tower bolts( berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads and lifts. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. (a) 150x10mm |
| 38 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. (a).100mm |
| 39 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. (a).75mm |
| 40 | Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting.i) 610 x 510 mm with bowl depth 200 mm. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 41 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. Make Cera or Equivalent |
| 42 | Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:- as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. (a) Flat back (i) 560 X 460X 180 MAKE Ess Ess (Asian Paint bath sense wash basin CAT No:- MYSTIC WM-25-X & Vitreous China Pedestal for wash basin MAKE Ess Ess (Asian Paint bath sense wash basin CAT No:- SERENE FP-23-S |
| 43 | Providing and fixing Angle Stop Cock of ESSas per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc.make Bat MAKE Ess Ess (Asian Paint bath sense PRIMUS CAT. NO. -P112 |
| 44 | Providing and fixing Bib Cock of ESS as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc.make MAKE Ess Ess (Asian Paint bath sense Deon CAT. NO. -DE03C |
| 45 | Providing & Fixing vitreous China wash down , water closet European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1Cement:1 sand) (Seat cover to be measured & paid for separately)as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. (ii) Anglo Indian . MAKE Ess Ess (Asian Paint bath sense PRIMUS S CAT.NO:-ECS-20-S |
| 46 | Providing and fixing PTMT coloured / white high density polyethylene / poly propylene 10litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. MAKE Ess Ess (Asian Paint bath sense TREND SFS CAT.NO:- PT-23-X |
| 47 | Providing and fixing P.V.C. waste pipe flexible (Coil type)as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. Make Vikingi) 32 mm dia |
| 48 | Providing and fixing C.P. Brass waste for wash basin or sink as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. (I) 32mm dia Make Viking or equalent |
| 49 | Providing and fixing Toilet paper holder as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. ESS make CAT. NO :-AC 106 |
| 50 | Providing and fixing soap dish Wall mounted ESS as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc.make CAT. No :-AC- 303 |
| 51 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) 600mm x 20mmm ( Through Rate) Make ESS ESS Cat No.AC-701 |
| 52 | Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers ias per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 53 | Providing and fixing PVC Floor trap of ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. i) 110 mm X 90 mm. |
| 54 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc..110 mm dia. |
| 55 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. 110 mm dia. |
| 56 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete.as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. 110 mm dia |
| 57 | Providing and fixing PVC plain SINGLE equal branch ISI marked including fixing with approved adhesive etc. complete.as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc.110 mm dia. |
| 58 | Providing and fixing PVC COLLAR ISI marked including fixing with approved adhesive etc. complete. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc.110 mm dia. |
| 59 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 60 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making goodthe wall, ceiling and floor:- 15mm nominal bore. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 61 | Providing and fixing G.I./M.I Union of following sizes (where not included in the items as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 62 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making goodthe wall, ceiling and floor:- 20mm nominal bore. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 63 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 64 | Providing and fixing P.V.C. water storage tank of I.S.I ; 12701 marked SINTEX or equivilent G.i. Inlet and outlet connecution, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement inculding hoisting up to all heights above ground level. including curing complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge |
| 65 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)20 mm nominal bore as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 66 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 67 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 68 | Providing and fixing P.V.C connection with brass unions (a) 300/450mm length (i) 15mm nominal bore as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. Make Viking |
| 69 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand). as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 70 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials within all leads and lifts:- (i) 110mm size. as per HPPWD specification and as per direction of Engineer - in- charge including all kind of mechanical as well as manual transportation charges and all taxes etc. |
| 71 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit having wall thickness minimum 2 mm with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc .:group C |
| 72 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit having wall thickness minimum 2 mm, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . :Group C |
| 73 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit having wall thickness 2.0mm as required :2 X 4 sq. mm + 1 X 4 sq. mm earth wire. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 74 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit having wall thickness 2.0mm as required :4 X 4 sq. mm + 2 X 4 sq. mm earth wire. mm earth wire. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 75 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit having wall thickness 2.0mm as required :2x2.5 Sqmm+ 1 X 2.5 sq. mm earth wire. mm earth wire earth wire. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 76 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit having wall thickness 2.0mm as required :2 X 6 sq. mm + 1 X 6 sq. mm earth wire. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 77 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit having wall thickness 2.0mm as required :2 X 10 sq. mm + 1 X 6 sq. mm earth wire. mm earth wire. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 78 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit having wall thickness 2.0mm as required :4 X 10 sq. mm + 2 X 6 sq. mm earth wire sq. mm earth wire. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 79 | Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 80 | Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 81 | Providing, Installation, testing and commissioning of BLDC ceiling fan (5 star rating), including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . Ceiling Fan 1200 mm sweep, Category-A |
| 82 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as requiredcomplete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . Exhaust Fan, Light duty, (Domestic) 300 mm sweep |
| 83 | Providing and installation of LED fixture 12 W +/- 1 W LED Square Surface Mounted Downlighter Round Shape with minimum system lumen efficacy of 100 lm/W with and P. F > 0.95 with THD <20%, CCT 6000 K,CRI 80, The LED with useful life of 50000 Hrs at L70. The input voltage range shall be 150V to 270V LED Surface mounting round downlighter 12 watt complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 84 | Providing and fixing LED Batten Light of IP40 Led fixture 40 W+/- 1W with Surface Mounted 4 Feet with Polycarbonate diffuser with Extruded aluminium housing having minimum system lumen output 1000 lumens and system lumen efficacy of >100 lm/W with P.F.>0.95 with THD<20% ,CRI 80 .The LED with Useful life of 50000 Hrs at L70 . The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K with CRI of minimum 80.The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. LED Batten Light of 40 Watt complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 85 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:- Gyser 25 Liters. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 86 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, neutral link, earth bar, din-bar, interconnections, powder painted, including earthing etc. as required:-(But without MCB/RCCB/Isolator)Double door-4 way. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 87 | Supplying and fixing of 6 amps. to 32 amps. rating, 240/415 volts,10 kA 'C' curves, miniature circuit breaker suitable for inductive load of following poles in the existing miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required:-6 Amp Single pole. Cat-A. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 88 | Supplying and fixing of 6 amps. to 32 amps. rating, 240/415 volts,10 kA 'C' curves, miniature circuit breaker suitable for inductive load of following poles in the existing miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required:16 Amp Single pole. Cat-A. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 89 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps. Cat-A. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . |
| 90 | Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.65-70 AMP/18 KA. complete as per HPPWD specification and as per direction of Engineer - in- charge including supply and installation and including all kind of transportation charges and all taxes etc . Please Enable Macros to View BoQ information |
