|
| 1 | Excavation in drain and channel etc in earth work in all kind of soil such as pick work Jumper work, pick jumper work blasting work hard rocks and chiseling /wedging out rock etc. and pumping or bailing out water including dressing of side and bed and stacking of serviceable materials and disposal of surplus earth in all leads and disposed earth to be levelled and neatly dressed including carriage of materials all leads and lifts and as per the direction of Engineer - in- Charge |
| 2 | Providing and laying cement concrete 1:6:12 (1 cement:6 sand 2 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth with complete in all respect. |
| 3 | Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design and specifications |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 5 | Filling in plinth with stone filling under floors including watering ramming, consolidating and dressing complete as per approved drawing, design and specifications and as per direction of Engineer - in- Charge |
| 6 | Random rubble masonry/polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 Sand: 12 Graded) stone aggregate 20mm nominal size) in cement mortar 1:6 (Icement: 6 sand) in breast walls and retaining walls |
| 7 | Providing and fixing 40mm thick panelled and glazed shutters of second class deodar wood for doors having 12mm thick 2nd class deodar wood infill panel with wooden bead of both side below lock rail and 6mm thick glass panes (Double glass units) of Modigaurd / sanit gobain or its equvalent above lock rail including black enamelled iron butt hinges with necessary screws. |
| 8 | Providing and fixing Glazing with glass panes of 5mm (Five milimetre) thick plain glass (Double glass units) weight not less than 12.50Kg/M2 (Thirteen point seven five Kilogramme per square metre) for single units of Modiguard / Saint Gobian for shutters with putty and nails complete, as per specification, approved drawing, design, as per direction of Engineer - in- Charge |
| 9 | Providing & fixing 8 mm thick Cement bounded particle board including carriage of materials within all leads, lifts and as per direction of Engineer in Charge |
| 10 | Providing and fixing 300x16mm size anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. Providing and fixing 250x16mm size aluminium anodized sliding door bolt anodized transparent or dyed to required shade and colour with screws etc. complete |
| 11 | Providing and fixing 250 x 16mm size Aluminium anodized sliding door bolt anodized transparent or dyed to required shade and colour with screws etc. complete. |
| 12 | Providing and fixing Aluminium anodized Towel bolt Barrel type anodized transparent or dyed to required shade and colour with screws etc. complete. 250x100mm |
| 13 | 150x10mm |
| 14 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 150mm size |
| 15 | 125mm size |
| 16 | Providing and fixing Aluminum oxidized Hydraulical door closer Complete |
| 17 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. Complete Twin rubber stoppe |
| 18 | Providing and laying mirror polished 19 mm thick Kotah stone minimum Size 55X55cm/55 X 27.5 cm of uniform colour with 7.5 cm wide Jaislmer Yellow marble band of same shade that of flooring of approved shade as per detail slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 |
| 19 | Kota stone slabs 19mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing |
| 20 | Providing of interlocking concrete block pavements having thickness 60mm as per drawing and technical specification clause 1504 |
| 21 | Providing and fixing 0.60 mm thick prepainted steel sheet (ISI marked-Z-120) of Tata/Sail/Reliance/Jindals steels in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/e fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limper and ruber washed complete as per approved drawing, design and specifications. |
| 22 | providing and fixing valley 90cm overall 0.60mm thick prepainted steel sheet of Tata / Sail Reliance/Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns oper microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete as per approved drawing design and specifications |
| 23 | Providing and fixing factory made ridges or hips having proper gola shape 60 cm overall with 0.60 mm thick prepainted steel sheets of Tata / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.1. limpet and bitumen washers complete as per approved drawing design and specifications |
| 24 | Providing and fixing 30cm (Thirty Centimetre) wide 25cm (Twenty five centimetre) deep 0.60mm (Zero point six zero millimetres) thick prepainted plain P.G.I. sheet gutter of Tata/Sail having dome shape grating fixed with bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete as per approved drawong, design and specifications |
| 25 | Providing and fixing M.S. B.P. sheet 2.0mm thick eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (Base members of steel work shall be measured and paid separately) including fixing complete as per approved drawing.design and specifications |
| 26 | 15mm thick cement plasters in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:6 (1 cement: 6 sand) above plinth level to floor two level as per Architectural drawing, design and specification. |
| 27 | Applying two coats of Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete |
| 28 | Finishing walls with apex weather proof exterior emulsion of Asian paints/Dulux paints/Berger paints/Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more Coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior PRIMER applied @ .90 litre/10 sqm as per Architectural drawing, design and specification. |
| 29 | Wall painting with acrylic emulsion paint, Asian paints/Dulux paints / Nerolac paints Berger Paints/ having VOC (Volatile Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 30 | Steel work of TATA / SAIL welded in built up sections in trusses and framed work trussed purlins in buildings etc. |
| 31 | Providing and fixing vitreous China wash down water closet (European type W.C. pan) of Constellation No. S No. 20007(S-10) size 57x35x39Cm with 10 litre low level PVC flushing cistern (Sleek plus) having dual flush system of Jaquar/Hindware/Cera with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with seat & lid fixed with C.P. brass hinges and rubber buffers, with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap TRAP including jointing the trap and soil pipe with adhesive of approved brand. ( jet Spray to be measured and |
| 32 | Providing and fixing vitreous China under counter wash hasin Garnet No.10080 size 58x43Cm of Jaquar/Hindware/Cera or its equivalent with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete as per Architectural drawing design and spesifications |
| 33 | Providing and fixing mixer for kitchen sink ISI marked of Jaquar or its equivalent with casted botton swinging spaut at top |
| 34 | Providing and fixing 15mm (Fifteen millimeters) diameters C.P. brass bib tap ISI marked of Jaquar or its equivalent of approved quality (superior or heavy type) and colour of prayag polvnets syonet complete. |
| 35 | Providing and fixing 15mm (fifteen millimeter) dia CP brass stop cock ISI marked of Jaquar or equivalent complete |
| 36 | Providing and fixing 15mm (fifteen millmeters) C.P. brass angle valve ISI marked of Jaquar or its equivalent without nuts and pipes. |
| 37 | Providing and fixing 15mm (Fifteen millimeters) nominal bore brass full way valve with wheel complete |
| 38 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) with R.C.C. top slab with 1:15:3 mix (1 cement: 1.5 coarse sand (zone- III): 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse sand (zone- III): 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a fleating coat of neat cement complete as per standard design inside size 90x80 cm and 45 cm deep including C.1. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kz (weight of cover 23 ke and weight of frame 15 ki With Sewer bricks conforming to IS: 4885 |
| 39 | Providing and laying 150mm nominal bore/diameter (to level or slopes) PVC pipe grade 'B' and jointing with approved adhesive ncluding testing of pipes and joints complete |
| 40 | Painting two coats (including priming coat) on new steel and other metal surfaces with enamel paint of Nerolac / Asian brushing of approved shade to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter as per approved drawing design and specification |
| 41 | Providing and fixing 10.001 Ltr. Capacity PVC low level flushing cistern Hind ware sleek ultra design No-186575 size 42 x 39 x 14 cm or equivalent with a pair of CI or mild steel brackets complete with fitting such as lead value less syphon 15mm nominal size brass ball valve with polythene float CP brass handle unions and couplings for connection with inlet outlet and over flow pipes 40mm dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for seprately) Please Enable Macros to View BoQ information |
