|
| 1 | Earth work excavation in foundation in all kind of soil within 50m. Initial lead and 1.5m. Initial lift icluding rough dressing and bracking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m. in depth and as per the direction of the EIC. 15 |
| 2 | Providing spreading, filling in foundation and plinth with sand watered and rammed as per OPWD specification including cost of materials, labour, conveyance, royalty, Tools and Plants etc.all complete required for the work to finished items of work. 18 |
| 3 | PCC (1:3:6) with 40 mm size HG metal including all cost of materials, labour, conveyance, royalty, T&P, water for curing etc all complete. 37 |
| 4 | Fly ash bricks 25 cm x 12 cm x 8 cm size having C/S > 75 kg/cm2 in CM (1:6) in foundation and plinth including cost of materials, labour, royalty, conveyance, Tools and Plants, water for curing etc. all complete as per OPWD specification required for the work to finished items of work. 95 |
| 5 | 16 mm thick cement plaster (1:6) over brick or stone masonry 180 |
| 6 | RCC work of M20 grade with 20 mm and down grade CBHGC including hosting and laying all cost of materials, labour, conveyance, royalty, T & P, water for curing etc.all complete. 57 |
| 7 | Requirement of HYSD/ MS rod and labour for cutting, bending,binding, straighting and laying the grills and placing in position including cost of rod & binding weir 18 to 20 gauge. 62 |
| 8 | RCC foundation, plinth band and footings bases of columns mass concrete pre-cast slabs etc. 67 |
| 9 | Supplying of all materials, labour, T & P for providing mild steel tubular posts truses and base plates duly plainted with red oxide primer etc. required for the complete in all respect |
| 10 | Supplying, fitting and fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000 mm width & total coated thickness 0.50 mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & |
| 11 | Cost of Ridges |
| 12 | Painting two coats with approved paint on new wood work. 151 |
| 13 | Providing, fitting and fixing up partition walling OEL aluminum anodized section No. 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12 mm thick prelaminated board (Nova pan Make) and jointing angle No. 1855 |
| 14 | Providing fitting and fixing of false ceilling with aluminium anodised T Section No. 3215 with 2'-0\\" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2'-0\\"x7-0\\" with prelaminated particle board suspended from ceiling etc complete. 275 |
| 15 | Cost of Primer,Paint,Painting & Letter writing over Disply board 303 |
| 16 | Cost towards electrification Please Enable Macros to View BoQ information |
