|
| 1 | Demolition of brick work built in cement mortar of any description complete all as specified and directed. |
| 2 | Material and labour brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size brick complete all as specified and directed. |
| 3 | Material and labour brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:6 by using old size brick complete all as specified and directed. |
| 4 | All as per item 02 above but except brick complete all as specified and directed |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 6 | Material and labour for glazed ceramic colour tiles 300X 450 X 7 mm thick as on vertical surface such as skirting, dado, riser etc. in Bath, WC , Kitchen and cupboards set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 7 | Material and labour for non-skid coloured joint free ceramic tile 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but n. exc. 0.11 Sqm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed or bedding layer in CM (1:6) and pointed in white or coloured cement to match complete all as specified and directed. |
| 8 | Material and labour for vitrified ceramic tile 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 10mm rendering in CM 1:6 complete all as specified and directed. |
| 9 | Material and labour for joint free vitrified ceramic tile 10 mm thick(square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc set and jointed in neat cement slurry pointed in white or coloured cement to match the shade over and including 10mm rendering in CM 1:4 complete all as specified and directed. |
| 10 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 11 | Material and labour 10 mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished fair and even without using extra cement complete all as specified and directed. |
| 12 | Material and labour for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement complete all as specified and directed. |
| 13 | Material and labour for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers mixed with water proofing compound in top layer 200 ml per bag of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. (WPC shall be measured and paid for seperately) |
| 14 | Supply only liquid water proofing compound complete all as specified and directed. |
| 15 | Material and labour for wall care putty 3 mm thickness over newly plastered surface of wall to prepare the surface even and smooth complete all as specified and directed. |
| 16 | Material and labour for wall care putty 3 mm thickness over newly plastered surface of ceiling to prepare the surface even and smooth complete all as specified and directed. |
| 17 | Material and labour for preparing newly plastered surface of wall & Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over one coat of primer as per manufacturer's specification using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 18 | Material and labour for complete removal of existing treatment of old plastered surfaces of walls with applying two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface over one coat of primer after applying 2 mm wall care putty complete all as specified and directed. Note :- Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm with internal dust extraction system for clean environment certified by paint manufacturer. |
| 19 | Material and labour for preparing newly plastered surface of ceiling with two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spay in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 20 | Material and labour for complete removal of existing treatment of old plastered surfaces of ceiling with applying two coats of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spay in hard to reach areas and penetration of distemper on the surface over one coat of primer after applying 2 mm wall care putty complete all as specified and directed. Note :- Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm with internal dust extraction system for clean enviroment certified by paint manufacturer. |
| 21 | Material and labour for preparing newly plastered surface and finishing with two coats water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & color stay technology, excellent dirt pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti algai properties in two coats @ 1.79 litre (undiluted) / 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to drt the surface in both the coats of paint complete all as specified and directed. |
| 22 | Material and labour for complete removal of existing treatment of old plastered surfaces with two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & color stay technology, Excellent dirt pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti algai properties in two coats @ 1.79 litre (undiluted) / 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to drt the surface in both the coats of paint complete all as specified and directed. Note :- Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm with internal dust extraction system for clean environment certified by paint manufacturer. |
| 23 | Material and labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 24 | Material and labour for preparation of old wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 25 | Material and labour for preparation of new of previously untreated steel and iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 26 | Material and labour for preparation of old painted steel and iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 27 | Demolition of stone slab of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 28 | Material and labour for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, cooking platforms, corner shelf, flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4) including rounded the exposed surfaces of granite complete all as specified and directed. |
| 29 | Water proofing treatment to sunken portion and adjoining walls of kitchen. WC, bath & toilet, with PCC 1:7:12 type F-2 using 40mm graded crushed stone aggregate as in sunken floor filling and mass concrete including demolition of existing PCC & set in 15 mm plaster in cement mortar (1:3) after roughning and cleaning the surface mixed with WP compound as per manufacturer’s instructions shall be provided on sunken portion while the concrete is green (a) Apply cement slurry to the surface @ 0.488 kg /Sq. m of cement mixed with acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and the surface will be allowed to air cure for 4 hours. (b) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (c) Curing the sunken portion with water minimum for 48 hrs by ponding. (d) Paste one layer of 3mm thick APP membrane with bitumen by torch application to the treated sunken surface. (e) Joints/ traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified complete all as specified and directed. |
| 30 | Taking down chowkhat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site complete all as specified and directed. |
| 31 | Supply and fixing for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc. complete as specified size of frame 125 x60 mm complete all as specified and directed. |
| 32 | Material and labour for 40 mm thick flush shutters, solid core construction with block board core and ply wood face pannels commercial type on both faces are covered with decorative face veneer with lipping/ frame to match including all fittings complete all as specified and directed. |
| 33 | Supply and fixing 35mm thick glazed skelton shutter open rebated and prepaid to receive glass gauze extra (without sash bar), edges of plain, chamfered or rounded fitted with cut and mitred beads for securing glass excecter size of members of shutter including bidding to frame as specified in SSR part-I, sec 8 clause 8.20(a) complete all as specified and directed. |
| 34 | Supply and fixing aluminium sliding door bolt 300 mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 35 | Supply and fixing aluminium anodized barrel tower bolts, extruded section 150mm long complete all as specified and directed. |
| 36 | Supply and fixing aluminium anodized handles, D type, 125mm long complete all as specified and directed. |
| 37 | Supply and fixing solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete all as specified and directed. |
| 38 | Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with wood free EPS complete all as specified and directed. |
| 39 | Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal from site as directed complete all as specified and directed. |
| 40 | Taking up or down GI 20 mm bore pipe and connection including cleaning for refixing or removal from site as directed complete all as specified and directed. |
| 41 | Supply and fixing 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 42 | Supply and fixing 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 43 | Supply and fixing in replacement of 1000 ltrs rotational moulded polyethelene water storage tanks (cylindrical vertical with threaded closed top) incl connecting up pipes securing access covers, tank nipple of suitable size & check nuts complete all as specified and as directed. |
| 44 | Supply and fixing 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and directed. |
| 45 | Supply and fixing in repairs 15 mm stop valves fancy type cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 46 | Supply and fixing in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed. |
| 47 | Supply and fixing in repairs vitreous china wash basin, white, flat back, size 550x400m including brass CP 15 mm basin mixture, including brackets, cutting for pinning in ends of brackets or erecting stand and fixing and supply and waste pipe & connection pipe complete all as specified and directed |
| 48 | Supply and fixing water closet squatting pan (Indian type WC pan ) with 110 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:17.1.1 white vitreous china Orissa pattern WC pan of size 580x440 mm with integral type foot rests complete all as specified and directed. |
| 49 | Supply and fixing white vitreous china pedestal type water closet (European type WC pan with ISI marked white solid plastic seat and lid) with seat and lid, 10 litre low level white PVC flushing cistern, including 32 mm dia flush pipe, with manually controlled device handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed. |
| 50 | Supply and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre PVC automatic flushing cistern complete all as specified and directed. |
| 51 | Supply and fixing 32 mm dia PVC flexible waste pipe for sink or wash basin including PVC waste fittings complete all as specified and directed. |
| 52 | Supply and fixing in repair 20 mm dia chromium plated curtain rod having wall thickness of 1.25 mm (min weight 0.5 Kg/RM) with two chromium plated brass heavy duty brackets fixed with CP brass screws and PVC sleeves etc., wherever necessary complete all as specified and directed. |
| 53 | Supply and fixing in repairs 1500mm x 600 mm bevelled edge mirror of selected quality, mounted on 6 mm thick AC plain building board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers complete as specified and as directed. |
| 54 | Supply and fixing in repairs bib taps long body fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule (min weight of item 400 gm) complete all as specified and as directed. |
| 55 | Supply and fixing in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, (min weight of item 450 gm)screwed both ends including necessary fittings such as sockets for pipe or for union complete all as specified and as directed. |
| 56 | Taking down CI/PVC/AC soil pipe with fittings from wall, trenches of any description including fittings complete all as specified and directed. |
| 57 | Supply and fixing 75 mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 58 | Supply and fixing 110 mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 59 | Supply and fixing in repair for 75 mm dia PVC (SWR) floor trap, plain with square grating including jointing with solvent cement complete all as specified and as directed. |
| 60 | Supply and fixing 110mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints & including all fittings fixed to walls complete as specified and as directed. |
| 61 | Supply and fixing 75 mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints & including all fittings fixed to walls complete as specified and as directed. |
| 62 | Supply and fixing for stack clamps out of 50 mm by 5 mm flat iron 110 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 63 | Supply and fixing for stack clamps out of 50 mm by 5 mm flat iron 75mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 64 | Supply and fixing 75 mm dia PVC (SWR) bends complete all as specified and directed. |
| 65 | Supply and fixing 110 mm dia PVC (SWR) bends complete all as specified and directed. |
| 66 | Supply and fixing 110 mm PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed. |
| 67 | Supply and fixing 75 mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed. |
| 68 | Demolition of reinforced cement concrete of roofs, floors (other than ground floors), beams, staircase, column, landings, chajjas and similar suspended work cement complete all as specified and as directed. |
| 69 | Material and labour for RCC type A1,1:1.5:3 using 20mm graded aggregate slabs supported on walls, beams and columns in floors, chajjas, shelves, platform, lintel, deck slabs and the like complete all as specified and as directed. |
| 70 | Material and labour for TMT bar 10mm dia and over cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 71 | Material and labour for powder coated anodised aluminium window and ventilator shutters, with one or more rebates including joining cleat for fixing, side hung type with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-21 100mm long (4 no) suitable handle (2 no) complete all as specified and directed. |
| 72 | Material and labour for anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 73 | Supply & fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 74 | Supply and fixing 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed. |
| 75 | Material and labour for three track powder coated aluminium sliding window with two shutter, aluminium sections weighing 1.065 kg/m with 5 mm thick plain glass & one shutter with stainless steel fly proof jali with 50% opening including frame and all fittings & fixtures complete all as specified and as directed. |
| 76 | Material and labour for machine cut kota stone slab flooring 18-20 mm thick over 15 mm thick cement screed base in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 77 | Material and labour for kota stone slab 18-20 mm thick in riser & tread of steps, skirting, dado and pillar laid over and including rendering of 10 mm CM 1:4 cement screed and jointed complete all as specified and directed. |
| 78 | Material and labour for 18-20 mm thick granite edges and corners rounded and chamfered as in cills of windows etc fixed in CM 1:4 complete all as specified and directed. |
| 79 | Material and labour for grinding to existing kota stone, mirror polishing on marble/ granite/ kota stone/ work where required to give high gloss finish complete all as specified and directed. |
| 80 | Suppply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed |
| 81 | Supply and fixing of steel work in trusses, purlins, posts and the like using tubular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming I.S.1161-2014/IS 4923-1977 grade St-240 complete all as specified and as directed. |
| 82 | Taking down carefully copper /aluminium point wiring (light, fan, socket, or power) complete including fittings and fixture such as switches, ceiling roses pendents, regulators sockets / DBs / main switches include boards etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately), removing material, from site and making good the disturbed surfaces of walls, floor complete all as specified and directed. |
| 83 | Taking down carefully by sub main wiring/service connection of any type complete all as specified and directed. |
| 84 | Material and labour for wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required complete all as specified and directed. |
| 85 | All as per item 84 here in before but in same board -ditto- |
| 86 | Material and labour wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc. as required complete all as specified and directed. |
| 87 | Supply and fixing modular switch one way 6 Amp,1 module complete all as specified and directed. |
| 88 | Supply and fixing modular socket, 6 amps-3 pin combined, 2 module complete all as specified and directed. |
| 89 | Supply and fixing modular switch , one way, 16 amps, one module complete all as specified and directed. |
| 90 | Supply and fixing modular socket 16 amps-6 pin multipin, 2 module complete all as specified and directed. |
| 91 | Supply and fixing modular switch 2 way 6 Amp,1 module complete all as specified and as directed. |
| 92 | Supply and fixing two module stepped type electronic fan regulator 230 V on the existing modular plate switch box including connections but excluding modular plate etc. as required complete all as specified and directed. |
| 93 | Supply and fixing in repairs ceiling rose surface type, PVC/polycarbonate isolated body size 50x28 mm two to three terminals complete all as specified and directed. |
| 94 | Supply and fixing 1 or 2 module (75mm x 75mm) module, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (for telephone socket ) complete all as specified and directed. |
| 95 | Supply and fixing 3 module (100mm x 75mm) module, GI box alongwith modular base & cover plate for modular switches in recess etc. as required (for power socket and 5 A indo socket) complete all as specified and directed. |
| 96 | Material and labour wiring for circuit/ sub main wiring alongwith earth wire with the following sizes of PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in concealed/surface as required using following sizes of cables with and including in PVC conduit/casing caping of suitable size :- |
| 97 | 2x2.5 Sqmm+1x2.5 Sqmm earth wire,(for 5/15 Amp socket wiring) |
| 98 | 2x4.0 Sqmm+1x4 Sqmm earth wire,(For AC point/power point) |
| 99 | 2x6 Sqmm+1x6 Sqmm earth wire (VTPN DB to SPN DB) |
| 100 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50.0 sq mm 3.5 core(panel to TPN) complete all as specified and directed. |
| 101 | Supply and fixing LED light mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size incl old unsv complete all as specified and directed. |
| 102 | Supply and fixing LED lights fitting 1x20watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose incl old unsv complete all as specified and directed. |
| 103 | Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection incl old unsv complete all as specified and directed. |
| 104 | Supply and fixing in replacement 4 ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note: vertical type MCB TPDB is normally used where 3 phase outlets are required.) complete all as specified and directed. |
| 105 | Supply and fixing in replacement 12 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without MCB/ RCCB/ isolator) complete all as specified and directed. |
| 106 | Supply and fixing in replacement 5A to 32A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of single poles in the MCB DB complete with connections, testing and commissioning etc as required complete all as specified and directed. |
| 107 | Supply and fixing in replacement MCB DP of 40A rating, double pole, 240 V, isolator in MCB DB complete with connections, testing and commissioning etc. as required complete all as specified and directed. |
| 108 | Supply and fixing 40A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in MCB DB complete with connections, testing and commissioning etc as required complete all as specified and directed. |
| 109 | Supply and fixing in replacement 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required complete all as specified and directed. |
| 110 | Dismantling taking down of ceiling/exhaust fan, cleaning of its parts, greesing of if required and installation, testing and commissioning of ceiling/exhaust fan, including wiring with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required complete all as specified and directed. |
| 111 | Mateiral and labour for earthing with GI earth pipe 4.5 metre long, 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required complete all as specified and directed. |
| 112 | Material and labour for earth connection from earth electrode with 6 SWG dia GI Wire in 15 mm dia GI pipe from earth electrode including connection with GI thimble excavation and re-filling as required complete all as specified and directed. Please Enable Macros to View BoQ information |
| 113 | Material and labour for earth connection from earth electrode with 6 SWG dia GI Wire in 15 mm dia GI pipe from earth electrode including connection with GI thimble excavation and re-filling as required complete all as specified and directed. Please Enable Macros to View BoQ information |
