Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Civil work: Earth Work in excavation in Foundation Trenches in Ordinary soil (vide classification of soil item -B) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and |
| 2 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50Mand lift of 1.5M all complete as per building specification and direction of E/l. (mode of measurement compacted volume EARTH WORK BACK FILLING 60% OF TOTAL EXCAVATED EARTH |
| 3 | Earth filling in foundation trenches and plinth in layers notexceeding 150 mm. thick well watered, rammed, fully compacted ancl fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume). |
| 4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including’ cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 5 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level1:3:6 (1 cement : 3 coarse sand (zone - III): 6 graded stone aggregate 20mm nominal zie) |
| 7 | providing designation 75 B brickwork in C M ('1 :6 ) in foundation and Plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing. taxes and royalty all complete as per building specification and direction of |
| 8 | Providing Designation 100A B/W with Fly Ash Lime Brick (FALG) conforming to IS 12894-1990 (9\\"x4.5\\"x3\\") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 9 | Providing designation 112 mm thick reinforced designation 100 A brick work vuith fly ash lirne brick (FLAG)confirming to lS 12894- 1990 (9\\"x4'5\\"x3\\" ) in C.M. ( 1 . 4 ) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials, scaffolding, raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specificationand direction of E/|. |
| 10 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering and shuttering, finishing and reinforcement - all work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone - III): 3 graded |
| 11 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (zone - III) : 3 graded stone aggregate 20mm nominal size) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases, above plinth level upto floor five level, excluding the cost of cenetering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone - III): 3 graded stone aggregate 20mm nominal size) |
| 13 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases |
| 19 | Providing tor steel reinforcement of 8mm. dia. rods as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position (excluding carriage of bars to work site) all complete as per building specification and direction of.E/I. TMT FE 500 ( only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro, & Vizag (RINL)25% of total reinforcement taken for 8mm dia |
| 20 | rods as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position (excluding carriage of ba”rs to work site) all complete as per building specification and direction of E/l. TMT FE 500 ( only vaJid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro, & Vizag (RINL) -10mm dia - 15% of total reinforcement |
| 21 | 12 to 25mm dia - 60% of total reinforcement |
| 22 | Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with block board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocI‹s and taxes all complete as per building specification and direction of of E/l. |
| 23 | Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with block board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l. |
| 24 | Providing &, fixing pressed, steel door frames manufactured from commercial mild steel sheet of .1 1.25mm thickness including hinges ,jamb, lock jamb, bead and if requiredangle threshold of mild steel angle section 50 X 25mm, orangle threshold of mild steel angle section 50 X 25mm, orbase ties of 1.25mm pressed mild steel welded or rigidlyfixed together by mechanical means, adjustable lugs withsplit end tail to each jamb 'ncluding steel butt hinges split end tail to each jamb including steel butt hinges 2.5mm thick with mortar uards, lock strike-plate and 2.5mm thick with mortar juards, lock strike-plate andshock absorbers as, pecified and applying a coat of approved steel, primer after pre-treatment of the surface as directed by the Engineer lncharge - Profile - B - Fixing with adjustable lugs with split end tail to each jamb |
| 25 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet,mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. |
| 26 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters |
| 27 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 125x75x4 mm |
| 28 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 29 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodiccoating not less than grade AC 10 as per IS : 1868), transparent or dyed torequired colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 30 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 31 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 32 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) Window grill |
| 33 | Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.) |
| 34 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 35 | Supplying, fitting and fixing collapsib e gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, lo,cking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/L |
| 36 | Providing and laying double charged Vitrified floor tiles in different sizes (thickness to be specificed by the manufacturer) with water absorption less than 0.08% and conforming to IS:15822/ISO 13006 of approved make in all colour and shades, laid o.n 20mm fhick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/aqm including grouting the joints with white cement and matching pigments etc. complete size of tiel 600X600mmGround floor |
| 37 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 38 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 39 | Providing and laying 6mm precast white glazed tiles In walls over” 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cemenl including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification anddireciton of E/l. a With \\"A\\" grade white 15 x 15 cm tiles. |
| 40 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 41 | Providing 12mm Thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing wf!h all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and Jirection of E/l. |
| 42 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and” lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.around floor |
| 43 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/I. |
| 44 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 45 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered syrface bv rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, sacffolding washing of floors and taxes all complete as per building specification and direction of E/l, |
| 46 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 47 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 48 | Providing French spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed French polish including cleaning the surface after removing dirt, scales smokes, grease and sand papering including cost of scaffoldingand taxes all complete as per building specifcation and direction of E/l. |
| 49 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
| 50 | Providing 250 mm wide BRICK DRAIN in cement mortar (1:6) with avarage 150mm. Clear depth and 250 mm apron including cost of earthwork involved with 75m cement concrete (1:4:3) over one brick designation 75B, flat soling in proper grade and slope at the base , the drain dully plastered in C.M.(1:3) with puning over exposed surface all complete as per building specification and direction of E/l. |
| 51 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 52 | Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS. 13592 Type A including jointing with seal ring conforming to (S: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia |
| 53 | providing and fixing on wal( face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including ointing with seal ring confirming to IS. 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Bend 87.5 degree 110x110x110mm |
| 54 | Shoe (Plain) 110mm shoe |
| 55 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. |
| 56 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.-110 mm |
| 57 | Providing & injecting chemical emulsion for pre- construction Anti-termite treatment and creating a chemical barrier under and all around the coloum pits,walI treanches,basement excavation, top surface of plinth filling,junctions of wall and floor along the external perimeter of Building with approved chemical as per IS code As per specification and direction of E/l. |
| 58 | Carriage of materials: BRICKS, LEAD- 15 KM. |
| 59 | SAND, LEAD - 15 KM. |
| 60 | STONE CHIPS, LEAD -15KM. |
| 61 | STONE METAL, LEAD - 15KM. |
| 62 | EARTH, LEAD -2 KM |
| 63 | STEEL, LEAD- 10 KM |
| 64 | CEMENT, LEAD- 10 KM |
| 65 | PLUMBING SANITARY & WATER SUPPLY - Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry hindustan or any other ISS approved make with 100mm HCI p trap 15 litres Cl pull and let go flushing cistern of names or other ISS equivalent make complete with at[ fittings CI or C C bracket 32mm alkethene / PVC telescopic flush pipe about 2m long with one brass coupling and clamps GI chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm Cl body brass spindle stop cock of weight not less than 50 grames 15mm PVC connection pipe 450mm long and coat of red oxide primer etc all complete as per specification and direction of E/l.(A) 580 mm long with 12.5 litre low level PVC cistern |
| 66 | Supplying, fitting and fixing 40 mm high viterous whiteglazed earthen ware E.W.C. with \\"p\\" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings withC.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (A) With \\"P\\" trap{b)12.5 lit. low level P.V.C. cistern |
| 67 | Supplying, fitting ’and fixing flat back or angular lipped front vitreous white glazed earthern ware urinal of Hindustan \\"Parry\\" or any other approved ISS make with 5 ltrs. Capacity C.l. automatic fushing cistern of reliance for any other ISS approved make with all fittings with C.l. or RS brackets standard size G.l. flush pipe with fitting clamps 15mm C.l. body brass spindle stop cock of approved quality weight not less than 400 gms. 15mm PVC alkethene pipe 450mm long with brass coupling at both ends and doing plumber points including painting of exposed part with two coats of proved paint over a priming coat of red oxide cutting ll and floor making good the same etc. all complete per speciifcification and direction of E/I. Flat back standing ïorner (600X350mm) |
| 68 | supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or hindustan or any other I.S.S approved make supported on paintedC.I OR R.S bracket 32mm C.I brass waste 15mm diaC.I body bras's spindle stop cock of approved quality of' weight not less than 350 grames, 32mm PVC wate pipe 750mm long with brass coupling with one end and making plumber joints etc.all complete as per specification and direction of E/l. |
| 69 | Supplying, fitting and fixing gun metal full way valve of'approved quality all complete as per specifcation and direction of E/I. 20mm dia. |
| 70 | 25mm dia. |
| 71 | 32mm dia |
| 72 | 40mm dia |
| 73 | Providing and fixing brass stop cock of approved quality all complete as per specification and direction of E/l. ... 15mm dia. |
| 74 | Cutting drain width wise above GL for laying PVC pipe and restoring brick work in cement mortar (1:4) 12mm cement plaster in C.M. (1:4) with neat cement punning as per specifciation and direction of E/I. (PVC 110mm |
| 75 | Making holes in wall for laying PVC pipes and restoring the same all cost complete (PVC pipe 110mm dia) |
| 76 | Supplying all tolls and labour and cutting chajja cornice for laying PVC pipes and making good the same as per specification and direction of E/l. (110mm dia PVC pipe) |
| 77 | Supplying, fitting and fixing bathroom fittings of approved make and as per IS specification all cost complete as per direction of E/l. (all rates have been adopted from the basic rate from SOR + 30% for abour and Contractors profit) Pillar cock (long neck) (Basic rate Rs.806.5 + 10% for P. & laying charge) |
| 78 | Bib cock - long thread (Basic rate Rs.728.15 + 10% for P. & laying charge) |
| 79 | Glass shelf (Basic rate Rs.683.55 + 10% for C.P. & aying charge |
| 80 | 32mm dia. PVC waste pipe 750mm long with coupling Basic rate Rs.62.40+ 10% for C.P. & laying charge |
| 81 | mm C.P. nipple with coupling( basic rate Rs.87.2 + 0% C.P. & laying charge) |
| 82 | Steel jali - 100mm dia. (Basic rate Rs.48.20 + 10% forC.P. & laying charge |
| 83 | Providing Solvent cement ( basic item - 168 + 10% C.P & laying charge |
| 84 | Supplying, “fitting and fixing Mirrors of 6mm thick plate” glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. 600 X 450mm |
| 85 | Supplying, fitting and fixing C.P. brass towe( rail 20mm X 600mm with bracket container |
| 86 | Supplying, fitting and fixing C.P. brass soap dish container medium quality with screw and hinges etc. |
| 87 | Providing and fixing 15mm dia and 45cm long PVC connection pipe with heavy quality brass coupling at both ends etc all complete as per specification anddirection of engineer in charge |
| 88 | Supplying, materials and labour for constructinginspection chamber of designation class 75B bricks size 750mm deep, 600X450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.I. cover with frame (weight not less than 35kg) alongwith earth work in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of E/l. |
| 89 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931, 15mm dia nominal bore of approved brand C.P. fittings |
| 90 | Providing and fixing PTMT extension nipple 15mm sizewith 12\\" BSPT thread 70mm length and 30mm breadth and weighing not less than 18gms of approved make |
| 91 | Providing and fixing Chlorinated Polyvinyl Chloride/CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e fixing the pipe with clamps at 1Mtr. Spacing. this includes jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting Phases and making good the same including testing of ints complete as per direction of E/l. Concealed rk including cutting chases and making good the calls etc. 20mm nominal bore |
| 92 | 25mm nominal bore |
| 93 | 32mm nominal bore |
| 94 | External work - 40mm nominal bore |
| 95 | Providing & fixing on wall face unplasticised - RigidP.V.C. pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Singlesocketed pipes. 110 mm dia |
| 96 | Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Single Tee with door 110x110x110 ,mm |
| 97 | Bend 87.5 degree 110 mm bend |
| 98 | Single pushfit coupler |
| 99 | Providing and placing on terrace (at all floor levels) (PVC) Polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 100 | Providing and fixing 8mm dia C.P./S.S. jet with flexiblelube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved ay Engineer-in-charge |
| 101 | Cutting chajjas or concrete for laying PVC Pipe andrestoring the same with R.C.C. (1:2:4) brick work in c”ement Mortar (1:4) and cement plaster 1.4 as per specifiction and direction of E/l |
| 102 | ng holes in walls for PVC Pipe and restoring theMake atfer pipe Laying (b) 250mm thick wall |
| 103 | Supplying and fixing PVC fittings of approved makeconfirming to IS : 1729 including supplying nails and bobbins, fixing solutions including earth work or masonary work cutting and remaking and providilding as the case may be all complete as per specification and direction of E/I. PVC cowl - 100mm dia. |
| 104 | Floor trap - 100mm dia. |
| 105 | Lubricant |
| 106 | Door Piece |
| 107 | ELECTRIFICATION- Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required. |
| 108 | Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required. |
| 109 | Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket’ outlet and 15/16 amps modular type switch, connection, painting etc as required. |
| 110 | Circuit / Sub-main wiring in PVC Conduit: Wiring forcircuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.2x1.5 Sqmm + 1x1.5 sqmm earth wire |
| 111 | 2x2.5 Sqmm + 1x2.5 sq mm earth wire |
| 112 | 2x4 Sqmm + 1x4 sq mm earth wire |
| 113 | 4x6 Sq.mm + 2x6 Sq.mm earth wire. |
| 114 | S/F TP MCB DB:- Supplying and fixing of following way,three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). (All TP MCB DB shal be as per IS:8623) 4 Ways (4+12 ways) double door |
| 115 | S/F 'C' series MCB:- Supplying and fixing 240 volts, 'C series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connéctions, testing and commissioning etc, as required. 6/32A Single Pole |
| 116 | 6/32A TPN MCB |
| 117 | S/F Ceiling Rose: Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 118 | S/F Modular type electronic fan regulator: Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excludingmodular Dlate etc as reouired. |
| 119 | ITC Exhaust Fan upto 450 mm sweep: installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing,commissioning etc as required. |
| 120 | S/F Batten / Angle Holder: Supplying and fixing batten / angle holder including connection.etc as required. |
| 121 | S.I.T.C of following rating surface mounted LED tube light fittings suitable for 230V, 50Hz, single phase supply etc. complete as required - 20/22W. LED tube light |
| 122 | Bulk head fitting with 9/10Watt CFL/LED |
| 123 | Supplying, 15/16 Watt LED bulb of approved make |
| 124 | Supplying Exhaust fan of 12” (3D0mm) of aproved make |
| 125 | Supply, installation, testing and commissioning of’ following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sq.mm. FR. PVC insulated copper wire suitable for 230V, 50Hz, single phase supply etc. complete as required. - 1400mm (56\\") ceiling fan |
| 126 | S.I.T.C. of following rating LED street lighting luminarie die cast housing and toughened glass cover (IP-66 portion) in existing pole/pipe for supply voltage 100-270V. DC, 50Hz. Luminaire shall be confirm to IS:10322 part - 5/section 3 and shall be complete with all necessary accessories as required - 60W LED street light |
| 127 | S.I.T.C. of following rating recess/surface mounted LED round/square shape down light luminaire with pressure die cast housing for single phase supply Voltage. Luminaire shall be confirm to IS:10322 Part -5/section 2 of IEC:62722 with all necessary accessories as required 15/16W LED round down light - as CL |
| 128 | GI Earth Pipe Electrode: Earthing with G.I. earth pipe 4.5mtr long , 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcol and salt complete as required. |
| 129 | Supplying and nlaying 25mm X Smm G.I. strips at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required jointing shall be done by overlapping andwith 2sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 130 | Providing and fixing 25mm x Smm G.I. strip on surface orin recess for connection etc. as required |
| 131 | Provioding and laying 1.1 KV grade aluminium armoured cable as per IS 1354 (Part I) heavy duty all cost complete including cost of brass compression gland, cable jointing and end termination as per specification and direction f E/I. 3.5 core, 35 sq.mm |
| 132 | BORE WELL- Costs of drilling 200mmX165mmX125mtr. Dee borewell in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH ric machine, all complete including supplying at materials, tools, drilling rig, Air compressor and equipments, as well as fuel lubricants and cost of transportation of rig machine and other vehicles upto the site From 0-50 mtr. |
| 133 | Above 51 mtr.to 125 mtr |
| 134 | Above 125 mtr. |
| 135 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS : 12818, including required hire and labour charges fittings & accessories etc. all complete for all depths, as per direction of Engineer-in-charge 200mm nominal size dia |
| 136 | Gravel packing in tube well construction in accordance with IS : 4097, including providing gravel fine/medium/coarse, in required grading &size as per actual requirement, all complete as per direction of Engineer-in-charge |
| 137 | Development of tube well in accordance with IS2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required tile till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down meihod, colleting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete including hire & labour charges of air compressor, tools & accessoires etc. all as per requirement and direction of Engineer-in-charge. |
| 138 | Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of 200mm dia |
| 139 | Providing and fixing M.S. clamp of required dia to he top of casing/housing pipe of t‹:bewell as per S:2800 (Part-1) including necessary bolts & nuts of required size complete |
| 140 | Providing and fixing bail plug/bottom plug orequired dia to the bottom of pipe assembly of tubewell as per IS :2800 (Part-1) 200mm dia |
| 141 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pioes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement trenching,” refilling & testlng of joints complete as per direction of Engineer in charge 50mm nominal outer dia pipes |
| 142 | Supplying submersible pumps sets confirming toIS:8034 and motor confirming to IS:9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller, motor suitable for working on 415V+10%, 3PH. SOHZ, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thrust, water proof minding shall be provided. the pump set shal be suitable for direct couplings, pump shall have suitable outlet as per manufacture design. Anti thrust stream lined non return valve shall be provided with pump. 3 mtr. submrsible copper conductor cable in single/double run shall be provided with each pump.Submersible pump set 100mm dia (withpolypropylene/noryl impeller) upto 20 stage - 2.0 HP |
| 143 | RECHARGE PIT- EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance up to 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I. |
| 144 | Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge (Mode of measurement compacted volume) |
| 145 | Providing designation 75-B, BRICK FLAT SOLING joints filled with local sand including cost of watering, taxes and royalty all complete as per building specification and direction of Engineer In charge |
| 146 | Providing P.C.C. M-10 with nominal mix of (1:3:6) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. |
| 147 | Providing designation 75B brick work in C.M. (1:4) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 148 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25 of size 1000X450X50mm reinforced with 8mm dia four nos longitudinal & 9 nos. cross sectiona TMT hoop bars, including providing 50mm dia perforations @ 100 to 125mm c/c. including providing edge binding with M.S. flats of size 50mm X 1.6mm complete all as per direction of E/l. |
| 149 | Supplying, filling, spreading & levelling stone boulders of size range Scm to 20c, in recharge pit in the required thickness for all leads & lifts all complete as per directionof Engineer-incharge |
| 150 | Supplying, filling spreading & levelling gravels of size range Smm to 10mm in the recharge pit over the existing ayer of boulders in required thickness for all leads and ifts all complete as per direction of E/i. |
| 151 | Supply, assembling, lowering and fixing in vertical position in borewell/recharge pit unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS . 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer-in-charge 150mm nominal sizedia |
| 152 | Costs of drilling 200mmX165mmX125mtr. Deep borewell M 1035 in all kinds ’of soil and rock in rural area for installation of pump set with Hydraulic DTH rig” machine, all complete.including supplying all materials, tools, drilling rig, Air compressor and equipments, as well as fuel lubricants and cost of transportation of rig machine and other vehicles upto the site From 0-50 mtr. |
| 153 | Providing and fixing ball plug/bottom plug of required\\"dia to the bottom of pipe assembly of tubewell/recharge pit as per IS:2800(part 1) 150mm dia |
| 154 | Supplying, fitting and fixing 125mm dia UPVC pipe ofapproved quality and make - basic rate + 10% for C.P. and laying charge |
| 155 | CARRAIGE OF MATERIALS: BRICKS, LEAD- 25 KM. |
| 156 | SAND, LEAD - 15 KM. |
| 157 | STONE CHIPS, LEAD -15KM. |
| 158 | CEMENT, LEAD- 20 KM |
| 159 | SEPTIC TANK - EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance up to 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I. |
| 160 | Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge (Mode of measurement compacted volume) |
| 161 | Providing designation 75-B, BRICK FLAT SOLING joints filled with local sand including cost of watering, taxes and royalty all complete as per building specification and direction of Engineer In charge |
| 162 | Providing P.C.C. M-10 with nominal mix of (1:3:6) in Foundation with approved quality of stone metal grade III (53 to 22.4 mm size) and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. |
| 163 | Providing designation 75B brick work in C.M. (1:4) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 164 | Providing desinating 112 mm thick renforced desination 100 A brick work with fly ash lime brick ( FLAG ) conforming to IS 12894 - 1990 (9'' x 4.5'' x 3'') in C.M. ( 1 : 4 ) in superstructure with approved qulity of clean coarse sand of F.M. 2 to 2.5 including the cost of screening , carrige of material, scaffolding, racking out joints to 15 mm depth, curring, taxes and royalty 9but excluding the cost of reinforcement) all complete as per building specifiction. |
| 165 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering and shuttering, finishing and reinforcement - all work upto plinth level - 1:1.5:3 (1 cement : 1.5 coarse sand (zone - III): 3 graded stone aggregate 20mm nominalzie) |
| 166 | Centering and shuttering including strutting, propping etc. and remo’/al of form for Suspended floors, roofs, landings, balconies and access platform |
| 167 | Lintels, beams, plinth beams, girders, bressumers and Lintel bend |
| 168 | Providing tor steel reinforcement of 8mm. dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. Taking 8mm TMT FE 500 ( only valid for Tata (Tiscon) SAIL, JSPL, Electro Steels Ltd., Bokaro,& Vizag (RINL) |
| 169 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l. |
| 170 | Providing 1.5 mm cement punning including curring, carrage of water with all leads and lifts as per building specification and direction of E/I. |
| 171 | Supplying, fitting and fixing of C.I.Cover 600X450mm (weight 25kg) all cost complete JSR basic rate Rs1,470+14.95% for CP - Page 39 |
| 172 | Making soak pit 2.5M diameter 3 mtr. deep with 45X45cm19.32.1 dry brick honey comb shaft with brciks of class designation75 and S.W. drain pipe 100mm diamter 1.8 mtr. long complete as per standard design with FPS bricks |
| 173 | CARRAIGE OF MATERIALS: BRICKS, LEAD- 25 KM. |
| 174 | SAND, LEAD - 15 KM. |
| 175 | STONE CHIPS, LEAD -15KM. |
| 176 | STONE METAL, LEAD - 15KM. |
| 177 | STEEL, LEAD- 10 KM |
| 178 | CEMENT, LEAD- 10 KM |
| 179 | Goods & Service Tax (G.S.T.) - |
| 180 | Labour Cess - Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
