|
| 1 | Dismantlling and removing R.C.C. columns beams slab, staircase landing, lintels including stacking the useful materials for re-use and removing the debries within 50mtr lead. |
| 2 | Dismantlling and removing doors windows and ventilators including removal of frame, hinges fastening and stacking the same for re-use and removing the debries within 50mtr lead. |
| 3 | Dismantling Stone/B.M. in cement mortar under 3mtr height including stacking the useful materials for re-use & removing the debries away from work site within 50mtr |
| 4 | Carrage the Excavated Material away from Work site Within 5 Km lead |
| 5 | Earth work in excavation of foundation in oridinary soil within the initial lead and lift including dressing and levelling the bed and depositing the excavated materials away from the work site etc. all complete as directed by the Engineer-in-charge |
| 6 | Sand Filling foundation and plinth with sand well watered and rammed including all cost, carriage, royality, taxes and all labour, T & P etc. all complete as per the direction of Engineer-in- charge. |
| 7 | Cement concrete (1:3:6) using 40mm and down gradedhard granite crusher broken metal including all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in - charge. |
| 8 | Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. |
| 9 | Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. |
| 10 | Providing R.C.C. M20grade with 20mm and down graded CBHG chips including hoisting and laying with all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer-in- charge.Column Base |
| 11 | Column & Beam |
| 12 | Plinth Beam |
| 13 | Lintel |
| 14 | Stair |
| 15 | TMT reinforcement for R.C.C. work including cutting, bending, binding and placing in position Labor for including cost of binding wire 18 to 20 gauge and cost conveyance of M.S. rod etc. all complete. |
| 16 | Fly ash Brick masonry in cement mortar (1:6) in F&P with all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in- charge. |
| 17 | Fly ash Brick masonry in cement mortar (1:6) in Superstructure with all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in- charge. |
| 18 | Providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 19 | Providing 16mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 20 | 6mm thick C:P (1:4) finished smooth including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 21 | supplying fitting and fixing of vertrifed tile in floors of size 600mm x 600mmColoured / Printed series (Homogeneous) of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 Course sand) and filling joints with white cement of approved quality including cost , conveyance, taxes, cost of all labour etc. complete. |
| 22 | Fixing Granite in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the Granite including rubbing and polishing complete . |
| 23 | Fixing Marbel in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the marbel including rubbing and polishing complete . |
| 24 | Supplying, fitting and fixing up window(sliding type) made up aluminum section No.9778 as window fram, section No.4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending inculding locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 25 | Supplying fitting fixing of main gate Stain less steel framed fitting including all cost of the materials, carriage, alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 26 | Painting two coats over a coat of primer on new wood/Steel work of doors, windows, grill and including all labour, T & P, cost of paints as per the direction of Engineer-in-charge. |
| 27 | Painting two coats with weather seal coat over a coat of water bound wall primer. |
| 28 | Supplying all materials, labour, T&P and Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 29 | Painting two coats with plastic emulssion paint coat over a coat of water bound wall primer. |
| 30 | Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. requered for the complete in all respect. |
| 31 | Supplying ,fitting fixing of WPC door including cost of material, labour etc complete |
| 32 | fixing G.C.I. Sheet in roof drilling hole in windties including fixing of ridges valleys wind ties etc. excluding cost of fittings. |
| 33 | Labour for fixing G.C.I. Sheet in roof drilling hole in windties including fixing of ridges valleys wind ties etc. excluding cost of fittings. (Labour Only) |
| 34 | Supplying fitting fixing of main gate GI framed fitting including all cost of the materials, carriage, alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge. |
| 35 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the E.I.C |
| 36 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the E.I.C |
| 37 | Supplying Fitting and fixing adjustable bathroom ventilation glass louvers (0.60 mx0.75m) in position in wooden, steel window frames including Frosting glass-panes including cost of all labour and materials cutting grooves etc complete |
| 38 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.250mm to 375mm thick wall |
| 39 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes (SDR 11) conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. (Make: Oriplast/Supreme/Astral/Hariplast/Fenolex & Equivalent)40mm Outer dia C-PVC pipe(External) |
| 40 | 32mm Outer dia C-PVC pipe(External) |
| 41 | 25mm Outer dia C-PVC pipe(External) |
| 42 | 25mm Outer dia C-PVC pipe(internal) |
| 43 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. |
| 44 | supplying all materials, labour, T&P and cutting holes in R.C.C Floors, roofs etc upto 19mm thick for passing G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:2:4) including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C. |
| 45 | Supplying all materials, labour, T&P for providing fitting and fixing of brass/C.P fittings of the following nominal bore with supply of all jointing materialsetc. all completed as per approved specification and direction of E.I.C15 mm dia C.P Bib cock(Short Body) (JAQUAR Make, Model: CON-CHR-047KN) |
| 46 | 15 mm dia C.P Bib cock (Long Body) (JAQUAR Make, Model: CON-CHR-107KN) |
| 47 | 15 mm dia C.P Two way Bib cock (JAQUAR Make, Model: CON-CHR-041KN) |
| 48 | 15 mm C.P flange |
| 49 | 15 mm C.P Extension piece 50 mm long |
| 50 | 15 mm dia C.P Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) (JAQUAR Make, Model: ALD-CHR-579) |
| 51 | 15mm dia CP pillar cock (JAQUAR Make, Model: CON-CHR-011KN) |
| 52 | 40mm dia brass stop cock/F.W.V (Sakti make) |
| 53 | 32mm dia brass stop cock/F.W.V (Sakti make) |
| 54 | 15 mm C.P/ concealed stop cock (JAQUAR Make, Model: ALD-CHR-083FT & CON-CHR-083FTK) |
| 55 | 15 mm C.P/ Angle stop cock (JAQUAR Make, CON-CHR-059KN) |
| 56 | Overhead Shower ø100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with Shower Arm ø20mm & 280mm Long Round Shape for Ceiling Mounted Showers with Flange (JAQUAR Make, Model: OHS-CHR-1989 & SHA-CHR-475L280} |
| 57 | 125mm dia CP gratings |
| 58 | Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C10 lit PVC low level cistern-White (Slimline-white) |
| 59 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.2000 lits capacity on the roof of 1st floor(IInd Floor) |
| 60 | Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (soil, waste, rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. (Make: Oriplast/Supreme/Astral/Hariplast/Fenolex & Equivalent)110 mmdia UPVC SWR Pipe (Type B) |
| 61 | 75mm dia U-PVC SWR pipes (Type B) |
| 62 | 75x75x75 mm dia UPVC Plain Shoe Bend 45° |
| 63 | 110x110x110 mm dia UPVC SWR Single Junction with Door |
| 64 | 110x110x110 mm dia UPVC SWR Double junction with Door |
| 65 | 110x110x110 mm dia UPVC SWR Bend 87.5° |
| 66 | 110x110x110 mm dia UPVC Plain Shoe Bend 45° |
| 67 | 110 mm dia UPVC Cowl |
| 68 | 75 mm dia UPVC Cowl |
| 69 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. |
| 70 | Supplying all materials, labour, T&P and cutting holes in R.C.C roofs and cornice etc upto 19mm thick for taking HCI/PVC pipes and fittings and repairing the holes after insertion of pipes etc including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C. |
| 71 | Supplying all materials, labour, T&P and cutting holes in R.C.C chajja for taking HCI/PVC pipes and fittings and repairing the holes after insertion of pipes etc including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C. |
| 72 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. 580x440mm orissa pattern Squatting pan (White) (Hindware/Parryware/Neycer/CERA) |
| 73 | Fixing of 100 mm dia 'P' or 'S' Trap (with horn or without horn)for water closet squatting pan including jointing with trap and pan in cement mortar (1:1) etc all complete as per specification and direction of the E.I.C.100 mm dia P trap UPVC |
| 74 | 100 mm dia S trap UPVC |
| 75 | White vitrous china wash down water closet(E.W.C) 'P'/'S' trap (Hindware/Parryware/Neycer/CERA) |
| 76 | Plastic seat cover with cp/brass hinges and rubber buffers (Hindware/Parryware/Neycer/CERA) |
| 77 | Sensor operated wall Urinal (Back Inlet) With Fixing Accessories, Size: 385x325x635 mm (JAQUAR Make, Model: URS-WHT-13253N) and Sensor Concealed Type Flushing Valve for Urinal Complete Set with Installation Box with Control Cock (Battery Operated) (JAQUAR Make, Model: SNR-STL-51087 |
| 78 | Supplying all materials, labour, T&P and fixing wash hand basin with hole for pillar tap with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.550mm x 400mm wash hand basin (Hindware/Parryware/Neycer/CERA) |
| 79 | Supplying all materials, labour, T&P and fixing P.V.C waste pipe of the following nominal diameter for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C.P.V.C waste pipe 40mm dia with length not less than 700 mm |
| 80 | Supplying all materials, labour, T&P and fixing 15 mm dia P.V.C connection pipe of the following nominal diameter and making connection with Pillar cock and supply main for wash hand basin complete etc all complete as per specification and direction of the E.I.C. |
| 81 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with C.P screws and washers etc all complete as per specification and direction of the E.I.C.600mm x 600mm B.E glass mirror |
| 82 | Supplying all materials, labour, T&P and fixing of standard sized glass shelf with cp bracket and guard rail and fixed to wooden plugs with C.P screws and washers etc all complete as per specification and direction of the E.I.C.Glass shelf with cp bracket and guard rail (JAQUAR Make, Model: ACN-CHR-1171N) |
| 83 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail/ring complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.CSingle Towel Rail 600mm Long, Stainless Steel (JAQUAR Make, Model:ACN-CHR-1111SM) |
| 84 | Supplying all materials,labour, T&P and fixing standard sized CP Soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.CSoap Dish Holder (JAQUAR Make, Model:ACN-CHR-1131N) |
| 85 | Supplying all materials, labour, T&P and providing Curved shaped urinal partition with 8mm frosted glass Size H: 900mm W: 450mm including fitting & fixing in wall and making good the damages etc as per specification and direction of the E.I. (JAQUAR Make, Model: CJSE-CHR-810UC450X) |
| 86 | Providing and laying water proofing treatment in sunken portion/ raised portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. The rate includes provision of outlet pipe of 25mm size CPVC pipe for exhaust of percolation water if any. (CPWD AR Vol-II Si.22.5)In Ist Floor |
| 87 | Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.110 mm dia PVC pipe line (All round) |
| 88 | Recessed wiring to Light point/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.) Group A 1.2.1-1.24.2 |
| 89 | do……… Group B 1.2.2 - 1.24.2 |
| 90 | do………. Group C 1.2.3 - 1.24.2 |
| 91 | Recessed wiring to Fan point in Group B 1.2.2 - 1.24.2 |
| 92 | Recessed wiring to Callbell point in Group C 1.2.3 - 1.24.2 |
| 93 | Supply and Fixing of 4M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (Separate) (1.25.1+1.25.4) |
| 94 | Supply and Fixing of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (Existing) (1.25.1+1.25.4) |
| 95 | Supply and Fixing to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for 2 Module (1.24.1)..do 4 Module |
| 96 | -do-6 Module |
| 97 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard). 2x1.5 sqmm + 1 x 1.0 sqmm( 1 .8) |
| 98 | do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 99 | do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 100 | do- 4x6sqmm +2x2.5sqmm (1.8.10) |
| 101 | Supply, Installation, Testing, and Commissioning of 63 Amp TPN Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK (2.15.3) |
| 102 | Supply and Fixing of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 103 | Supply and Fixing of 6 way (6+18) TPN MCB DB double door (2.5.6) |
| 104 | Supply, Installation, Testing and commissioning of bulkhead fittings including fixing of 5 watt LED Lamp (Make:Havels with die cast aluminium housing and frosted glass cover).RUGBY |
| 105 | Supply and Fixing of batten holder BK angle holder ISI marked including connection etc. instead of ceiling rose(1.29- 1.28) |
| 106 | Supply and Fixing of 15W LED Bulb |
| 107 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.5+3.6) |
| 108 | Supply andlaying 8 SWG copper wire in recess for loop earthing as required (3.18) |
| 109 | Supply and Fixing of 48\\" A.C.Cilling fan without regulator including all conections Model:Crompton (jura)/ Usha-(Striker Millenium) /Havells (Velocity/Spark) / Anchor - (XL)/ Orient-(Summer Pride) |
| 110 | S/F of 24W Recess Mounted Square Shape LED luminary,Make-Havells/Crompton/Philips |
| 111 | S/F of Fan hook S, Type on ceiling.(M-22) |
| 112 | Supply, Installation, Testing and commissionioning of 225mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: Bajaj/Almonard) |
| 113 | S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required.(1.30) |
| 114 | S/F of 60 watt. LED street light fitting including necessary connection. (Make- crompton/poly cab/Havells/ HPL/Philips) |
| 115 | Supplying fitting of 2 ton capacity AC(Hitachi/Blue Star/Godrej/Mistubhishi) including all assoseries etc complete as per specification .(payment shuld be made as per approved quotation rate by authority) Please Enable Macros to View BoQ information |
