|
| 1 | 15.6 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in- charge. 15.6.1 In lime mortar 15.6.2 In cement mortar |
| 2 | 2.6 Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means /manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavatedearth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soilFOR COLUMNS OF HALLFOR FOUNDATIONS |
| 3 | 7.1 Random rubble masonry with hard stone in foundation and plinthwith Cement mortar 1:6 (1 cement : 6 coarse sand) FOR FOUNDATIONS AND RETAININGS |
| 4 | C R masonry (second sort) with hard stone in foundation & plinth with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. 4.1.7 Cement concrete grade M-7.5 (Nominal Mix) with 40 mm maximum size of stone aggregate |
| 6 | 5.11 Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP :34) etc. complete. 5.11.1 Mild steel and Medium Tensile steel bars.. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.4.1.2 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate |
| 8 | 19.1 Centering and shuttering including strutting, propping stretching etc.complete for and removal of form work by sheet plate or ply wood shuttering for : 19.1.1 Foundations, footings, bases of columns, etc. For mass concrete. |
| 9 | Centering and shuttering including strutting, propping etc.and removal of form19.1.3 Suspended floors, roofs, landings, balconies and access platform. |
| 10 | Centering and shuttering including strutting, propping etc.and removal of form for19.1.6 Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 11 | Centering and shuttering including strutting, propping etc.and removal of form19.1.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 12 | 5.1 Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.1 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 13 | 5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.aboveplinth level and up to floor two level excluding cost of centering, shuttering and reinforcement etc. 5.2.1 Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 14 | 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor two level excluding the cost of centering, shuttering and reinforcement with Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 15 | 6.3 Brick work with chimeny brick of class designation 40 in superstructureabove plinth level upto floor 2 level including the cost of scaffolding in : 6.3.1 Cement mortar 1:4(1 cement : 4 coarse sand) |
| 16 | 13.2 15 mm cement plaster on rough side of single or half brick wall of mix 13.2.1 1:4 (1 cement: 4 sand) |
| 17 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 18 | 13.23 Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete |
| 19 | 13.46 Finishing with Deluxe Multi surface paint system for interiors andexteriors using Primer as per manufacturers specifications :13.46.1 Two or more coats on walls applied @ 1.25 ltr/10 sqm. over andincluding one coat of Special primer applied @ 0.75 ltr/10 sqm. |
| 20 | 13.46.3 Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two or more coat applied @0.90 ltr/10 sqm over an under coatof primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture |
| 21 | 10.26 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitablearrangement as per approval of Engineer-in-charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 22 | 10.14 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with any section made of1.60mm or 1.25mm thick M.S. Sheet, joints mitred and welded and grinded finish with profiles required size with 15x3mm lugs 10cm long embedded in cement concrete M-10 (Nominal Mix with 20mm maximum size of stone aggregate) blocks 15x10x10cm or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primers. |
| 23 | 2.18 Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. 2.18.1 Moorum/Hard copra |
| 24 | 22.10 Providing and laying below ground unplasticised PVC pipe to withstand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.22.10.2 160 mm diameter OD |
| 25 | 11.35 Providing and laying vitrified floor tiles (without Soluble salt) or printed(with soluble salt) Nano polished (Glossy finish) in different sizes withwater absorption less than 0.05% and conforming to IS : 15622 ofapproved make in all colours & shades, Ist quality/ premium quality inflooring laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand)including grouting the joints with white cement and matching pigmentsetc. complete. Size 600x600mm as per manufacturer specification. |
| 26 | 11.5 62 mm thick cement concrete flooring with concrete hardener toppingunder layer 50 mm thick cement concrete grade M-15 (Nominal Mix with20mm maximum size of stone aggregate) and top layer 12mm thickcement hardener consisting of mix 1:2 (1 cement hardener mix : 2graded stone aggregate 6mm nominal size) by volume. Hardeningcompound is mixed @ 2 litre per 50kg of cement or as per manufacturesspecifications. This includes cost of cement slurry, but excluding thecost of nosing of steps etc. complete. |
| 27 | 10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. |
| 28 | 1.3.6Circuit Wiring WiringforcircuitwiringwithPVCinsulatedcableFRwithcoppermultistrandconductorISImarkedinconcealedrigidP.V.C.conduit(HMS)ofISImarkedsuitablesizeincludingpaintingetc.asrequiredasperspecification2x2.5 Sq.mm. |
| 29 | 1.4WIRING IN CONCEALED RIGID PVC CONDUIT (HEAVY DUTY) SYSTEM WITH MODULER ACCESSORIESPointwiringincludingmetallicswitchbox,sheet,switche,socket,lampholders/ceilingrosesetcwith1.5Sq.mm.PVCinsulatedcableFRwithcoppermultistrandconductorISImarkedinconcealedrigidP.V.C.conduit(HMS)ISIMarkedofsuitablesizeand1.5Sq.mm.PVCinsulatedcopperearthcontinuityconductorofgreencolourinsideconduitincludingpainting etc. as required as per specification for :-1.4.1Light Point/Fan Points.(a) short point |
| 30 | (b) Medium point |
| 31 | (c) Long point |
| 32 | 11.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (6 to 7mm thick) of approved make in all colours, shades of anysize as approved by Engineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarsesand) and jointing with grey cement slurry including pointing in whitecement mixed with pigment of matching shade complete. Please Enable Macros to View BoQ information |
