|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m for all lift, as directed by E-I-C.All kind of soil. (2023 DSR 2.6.1) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 2 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. (2023 DSR 2.25 a) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 3 | Supplying and filing in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (2023 DSR 2.27) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (2023 DSR 4.1.8) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 5 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete. (2023 DSR 5.33.1.1) Concrete of M25 grade with minimum cement content of 330 kg /cum All works up to plinth level (Raft foundation and footing etc.) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 6 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete. (2023 DSR 5.33.2.1) Concrete of M25 grade with minimum cement content of 330 kg /cum All works above floor level up to floor V level (Column, Slab beam , Beams , lintel and slab) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for ( 2023 DSR 5.9.3) Suspended floors, roofs, landings, balconies and access platform (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for ( 2023 DSR 5.9.5) Lintels, beams, plinth beams, girders, bressumers and cantilevers (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for ( 2023 DSR 5.9.6). Columns, Pillars, Piers, Abutments, Posts and Struts (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (2023 DSR 6.1.2) Cement mortar 1:6 (1 cement : 6 coarse sand) (In foundation , plinth, G.F. , F.F., S.F. , T.F. and Mumty) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 11 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (2023 DSR 6.13.2) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 12 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2(1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (2023 DSR 2.35.3.1) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 13 | Thermo-Mechanically Treated bars work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. (2023 DSR 5.22.6) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 14 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125mm . (2023 DSR 9.165.1) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 15 | Providing and fixing cup board shutter 25mm thick, with Pre laminated flat pressed three layer particle board or graded wood particle board IS : 12823 marked exterior grade (Grade I Type II) , having one side decorative lamination and other side balancing Lamination, including IInd Class teack wood lipping of 25mm wide x12mm thick with necessary srews and bright finished stainless steel plano hinges, complete as per direction of the Engineer-in-Charge. (2023 DSR 9.129) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 16 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) both side-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (2023 DSR 9.20.1)35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.(Single Leaf with laminated sheet both side) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 17 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). (2023 DSR 9.23) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 18 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces (2023 DSR 10.5.1) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 19 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding . (2023 DSR 9.48.1) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.)excluding GST.) |
| 20 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.Fabrication of Grill/Stairs case railing (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 21 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading (2023 DSR 9.135.2) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 22 | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : (2023 DSR 9.134.2.1) With ISI marked stainless steel butt hinges of required size , second class teak wood (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 23 | Providing and laying \\"brick coba\\" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 24 | 12 mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. (i) 1 Cement : (ii) 6 Coarse Sand .(2023 DSR 13.4.2) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 25 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (i) 1 Cement : (ii) 6 Coarse Sand (2023 DSR 13.5.2) |
| 26 | 12 mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. (i) 1 Cement : (ii) 4 Coarse Sand .(2023 DSR 13.4.1) in ceiling. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 27 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (i) 1 Cement : (ii) 4 Coarse Sand (2023 DSR 13.5.1) in plinth. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 28 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. (2023 DSR 5.30) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 29 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. (2023 DSR 11.39) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 30 | Providing and laying vitrified floor tiles Equivalent brand of super quality in different size (Thickness specified by manufacturer) with water absorption make in all colors and shade laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand ) including grouting the joint with white cement and matching pigments etc. complete ( Size of Tile 600 x 600 mm) ( 2023 DSR 11.41.2) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 31 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm (2023 DSR 8.2.2.2) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 32 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (2023 DSR 11.26.1) 25 mm thick (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 33 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (2023 DSR 11.27) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 34 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. (2023 DSR 13.41.1) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 35 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (2023 DSR 13.47.1) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (2023 DSR 13.80) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 37 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. (2023 DSR 13.48.3) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 38 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. (2023 DSR 4.17) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 39 | Providing & Filling of O.B. brick ballast 25 mm to 40 mm size inside of upper layer in soak pit. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 40 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar ( 2023 DSR 19.15.1) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 41 | Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (2023 DSR 17.35.1.2) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 42 | Providing and fixing soil, waste and vent pipes : 75 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (2023 DSR 17.35.2.2) |
| 43 | Providing & fixing C.I.cowel. (2023 DSR 17.56.1.2) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 44 | Supplying and fixing C.I. cover without frame for manholes :500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 45 | Sanitary :-Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : ( DSR 17.2.1)W.C. pan with ISI marked white solid plastic seat and lid . (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 46 | Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where required : (2023 DSR 17.7.3)White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 47 | Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. (2023 DSR 17.10.2.1)Sink without drain board 610X510 mm bowl depth 200mm. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 48 | Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete .Flexible Pipe(1) 32mm Dia. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 49 | Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete .Flexible Pipe(2) 40mm Dia (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 50 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm dia… (2023 DSR 17.32.4)Rectangular shape 1500x450 mm (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 51 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. (2023 DSR 17.33) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 52 | Providing and fixing toilet paper holder :C.P. brass (2023 DSR 17.34.1) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 53 | Providing and fixing soil, waste, vent pipes Centrifugally cast (spun) iron S&S pipe. (2023 DSR 17.35.1.2)100mm dia cast (spun) iron S&S pipe (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 54 | Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. (2023 DSR 17.37.1)For 100mm dia. Pipe (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 55 | Providing and fixing heel rest sanitary bend, in Centrifugally cast (spun) iron pipe S&S (2023 DSR 17.40.1.2)100mm (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 56 | Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. (2023 DSR 17.43.1.2)100X100X100mmSand cast iron S&S as per IS : 3989 (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 57 | Providing and fixing PLAIN JUNCTION of required degree . (2023 DSR 17.44.1.2)100X100X100mmSand cast iron S&S as per IS : 3989 (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 58 | Providing and fixing terminal guard:100mm (2023 DSR 17.56.1.2)Sand cast iron S&S as per IS - 3989 (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 59 | Providing and fixing collar. (2023 DSR 17.57.1.2)100mmSand cast iron S&S as per IS - 3989 (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 60 | Providing and lead caulked joint (2023 DSR 17.58.1.)100 Dia (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 61 | Providing and fixing cast iron trap of self cleansing design with cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. (2023 DSR 17.60.1.1)100 mm inlet and 100 mm outlet,Sand cast iron S&S as per IS: 3989 (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 62 | Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work. (2023 DSR 17.65.1)100mm dia (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 63 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. (2023 DSR 17.71) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 64 | Providing & fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality and colour weighing not less than 88 gms (2023 DSR 17.72) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 65 | Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (2023 DSR 17.73.2)600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 66 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. (2023 DSR 18.7.1)(1) 15 mm nominal outer dia pipes (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. (2023 DSR 18.7.2)(2) 20 mm nominal outer dia pipes (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. (2023 DSR 18.7.3)(3) 25 mm nominal outer dia pipes (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. (2023 DSR 18.7.4)(4) 32 mm nominal outer dia pipes (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (2023 DSR 18.8.2)(2) 20 mm nominal outer dia pipes (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 71 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) (2023 DSR 18.17.1)(1) 25mm dia, nominal bore (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 72 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) (2023 DSR 18.17.2)(2) 32 mm dia, nominal bore (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 73 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) (2023 DSR 18.17.3) (3) 40 mm dia, nominal bore (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 74 | Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) (2023 DSR 18.17.4)(4) 50 mm dia, nominal bore (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 75 | Providing and fixing uplasticised PVC connection pipe with brass unions : (2023 DSR 18.21.2.1)45 cm length 15 mm nominal bore (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 76 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter (2023 DSR 18.22.1) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 77 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (2023 DSR 18.48) (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 78 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931. (2023 DSR 18.49.1)15mm nominal bore (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 79 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (2023 DSR 18.51.1)15mm nominal bore (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 80 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a)(2023 DSR 18.53.1)15 mm nominal bore (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 81 | Providing and fixing PTMT grating of approved quality and colour. (2023 DSR 18.58.1.1)Circular type100 mm nominal dia (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 82 | ROAD :-Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor/Tractor munted appropriate equipment on prepare surface mixing by mix in place method with rotavator at OMC and compacting with smooth roller to achieve the desired density complete as per Technical Specification Clause 401. (By Mix in Place Method). (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 83 | Interlocking Tiles Rubber moulded reflective Zig-Zag 80 mm Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawing and technical specification clause 1504 (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 84 | Boring For Submersible Pump - Nylon mesh for filter. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 85 | Boring For Submersible Pump - Plastic dori. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 86 | Boring For Submersible Pump -Solvent cement. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 87 | Boring For Submersible Pump -110 mm End cap. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 88 | Boring For Submersible Pump -110 mm Submersible cap. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 89 | Boring For Submersible Pump -50 mm MS clamp (Heavy). (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 90 | Boring For Submersible Pump -50 mm GI elbow. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 91 | Boring For Submersible Pump -50 mm X 110 mm GI nipple. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 92 | Boring For Submersible Pump - 2 HP 9 Stage submersible pump of ISI mark with automatic panel. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 93 | Boring For Submersible Pump -2.5 sqm. Submersible cable. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 94 | Boring For Submersible Pump -Pea Gravel. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 95 | Boring For Submersible Pump -2\\" MS socket. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) |
| 96 | Boring For Submersible Pump -Cartage of material upto site. (Rates are including all taxes, Royalty, Labour cess etc but excluding GST.) Please Enable Macros to View BoQ information |
