|
| 1 | NS items |
| 2 | Providing laying ,testing and commissioning of(C) class heavy duty MS pipe conforming to SI SI 1239 /3589 i/c fitie ke el gra ren chains ting excaration s antidios o treat ne wit oc lar asphat atpe as per IS 10221 refilling the trench etc o.f following sizes complete as required.100 mm dia (NS).` |
| 3 | SITC OF INTERNALOREXTERNALweatherproof 7 standard fire hose cabinet (750 m x600 m x 250 m deep) for yard hydrants made of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish with`Fire Hose` marked on front, suitable for housing 2nos. Hose pipe, 1 No. branch pipe andnozzle spanner. (For external hydrant system) (N.S ) |
| 4 | NS Item -Providing, fixing, testing and commissioning of 100 mm dia Burden type, Stainless Steel dial type pressure gauge (in Pump Room) including brass isolation valve and pipe having caliberation of 0-15 Kg/cm?. |
| 5 | `NS Item -SITC OF DOL type fire pump panel suitable for 450 Ipm fire pump 415V plus /-6 volts,panel shall be free standing floor mounting sheet metal enclosed dust and verming proof. Panel shall be provided with heat shrinkable sleeves and shall be colour coded. The panel shall be suitable for cable entry from top or bottem. The minimum fault rupturing for all incoming and outgoing switch/ breakers shall be 35 KA. The panel shall be fabricated.Auto mannual Starters with change over system.` |
| 6 | `NS Item -Fabrication, supply, insallation testing and commissioning of electrical control panel of cubical construction , floor mounted type, fabricated out of 2mm thick Crca sheet, compartmentalised with hinged lockable door,dust and vermin proof ,powder coated of approved shade after 7 tanktreatment process, cable alley ,interconnection with suitable size copper conducor cable / solid copper strip, having switchgears and accessories, numbering etc completein all respect ,suitable for main fire pump pressurisation pump and diesel pump set complete as per CPWDspecification with following mcoming andoutgoing, suitable for opreraton on 415v, 3 phase, 50 Hz Ac Supply with enclosure protection class IP 42 as required.As per DSR 18.5.3` |
| 7 | `NS Item -Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 includingWelding,fittings like elbows,teesflanges,tapers ,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required.DSR 2022 code no . 18.7` |
| 8 | `NS Item -Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.3` |
| 9 | `NS Item -Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.2` |
| 10 | `NS Item -Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.1` |
| 11 | `NS Item -Supplying and fixing 63 mm dia Stainless Steel (grade 304short branch pipe with 20 mmnominal internaldiameter size nozzle conforming to IS 903 suitable for instantaneousconnection to ilS 903suitable for instantaneousconnection to interconnect hose pipe coupling as required• (DSR code No. 18.18.2)` |
| 12 | `NS Item -Supplyingand fixing firs-aid Hose Reel with MSconstruction spray painted in post office red, conforming to IS 884 complite with the follwing as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced)type-2 as per IS 12585. 20 mm normal internal dia gun metal globe and nozzle. Drum and brackets for fixing the equipmets on wall.connections from riser with 25 mm dia stop gunmetal valve and MSpipe and socket(DSR Code No.18.17.1)` |
| 13 | `NS Item -Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and femaile coupling duly bond with GI WIRE, RIVETS ETC. CONFORMING TO IS 636(Type -A) as required. (DSR code No. 18.16.2)` |
| 14 | NS Item -Supplying and fixing single headed internal and external yard hydrent valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( TYPE -A) with blank stainless steel cap and chain as required) (DSR code No.18. 9.2) |
| 15 | `NS Item -Providing ,fixing, testing and commissioning of 15 mm dia quartzoid bulb type brass sprinklers of rating 68 degree centigrade with required accessories Pendent type (DSR18.21.1)` |
| 16 | `NS Item -Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following , complete in all respects, as required: (Terrace Pump)(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shsft mechanical confirming to IS:1520(b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volt ,3 phase ,50 Hz, ÁC supply with IPS5 class of protection for enclosure horizontal foot mounted type with class - `F`insulation conformingto IS- 325(c) M.S fabricated common base plate ,coupling ,coupling guardfoundation boltetc asrequired(d) Suitable cement concrete foundation duly plastered and withanti vibration pads450 LPM at 35 m head(DSR- 18.4.2)` |
| 17 | `NS Item -Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable automatic operation and consisting of following complete in all respects, as required: (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft mechanical seal conforming to IS: 1520 .Suitable HPsquirell cage induction motor tefc type suitable for operation on 415 volt, 3 phase 50 HZ AC supply with IP 55 class of protection for enclosure, horzontal foot mounted type with class- ` F `insulation, conforming to IS:325 M.S fabricated commonbase plate, couplingcoupling guard, foundation bolt etc as required. M.S fabricated bolt etc as required. Suitable cement concrete foundation duly plastered and with anti vibration pad180 LPM suitable for 56 Mtr23(DSR - 18.3.3 )` |
| 18 | `NS Item -Supplying, installation, testing and commissioning of electric driven Main Fire Pump suitable for automaticrespectsoperation and consisting of following, complete in all as required(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520(b) suitable HP squirrel cage induction motor ,TEFC , synchronous speed 1500 RPM, suitable for operation on 415 volt, 3 phase 50 Hz,ac supply with IP 55 protection for enclosure, horizontal foot mounted type with class ` SYSTEMF` insulations, conforming IS -325 FOR HYDRENT• (DSR - 18.1.9)1620 LPM suitable for 56 Mtr Head. ( DSR-18.1,9 )` |
| 19 | `NS Item -Supplying, installation, testing and commissioning of diesel engine drivenfire pump suitable forlautomatic mainoperation and consisting of followingcomplite in all respect, as required (Diesel Driven Pump ) horizontal type, multistage, centrifugal pump of cast of iron body and brinze impeller with stainless steel shaft, mechanical seal conforming to IS 1520 OF Suitable HP1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with autostarting mechanism, 12 /24 volt electric starting equipment, disel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick almunium sheet cladding, residebtial silencer, instruments and protection as per standard specification ,stop solenoid for auto stop in the ecent of fault with audio indications, painted with post office red colour etc .as required.M.S fabricated ,common base plate coupling ,coupling guard, foundation bolt etc. as required. 1620 LPM 56MTR HEAD ( DSR-18.2.9 )` |
| 20 | `NS Item -Providing, installation , testing and commissioning of non-return valve of following sizes confirming to IS 5312 complete with rubber gasket. GI bolt ,nuts, washers etc as required80 mm dia ((DSR code NO. 18.14.4)` |
| 21 | `NS Item -Providing, installation , testing and commissioning of non-return valve of following sizes confirming to IS 5312 complete with rubber gasket. GI bolt ,nuts, washers etc as required100 mm dia ((DSR code NO. 18.14.5)` |
| 22 | `NS Item -Supplying fixing ›testing and commissioning ofbutterfly vave of PN 1.6 rating with bronze /gunmetal seat duly ISI markedcomplete with nuts, bolt, washers gaskets conforming to IS 13095 OF FLOWING SIZES AS REQUIRED100 mm dia. (DSR code NO. 18.11.5)` |
| 23 | `NS Item -Supplying fixing ›testing and commissioning ofbutterfly vave of PN 1.6 rating with bronze /gunmetal seat duly ISI markedcomplete with nuts, bolt, washers gaskets conforming to IS 13095 OF FLOWING SIZES AS REQUIRED150 mm dia. (DSR code NO. 18.11.6)` |
| 24 | `NS Item -providing and fixing of pressure switch in M.S pipe line including connection(DSR code No. 18.22)` |
| 25 | `NS Item -Supplying and fixing orifice plate made out of 6mm thick stainless steel ( Grade 304 )with orrice of required sizeto be fitted between flange and landing valve of external and internal hydrent to reduce pressure at the outlet to the level of3.5 kg/cm2 complete as required. (DSR code No. 18.13)` |
| 26 | `NS Item -Supplying and fixing air vessel made of 250 mm dia ,8 mm thick MS sheet, 1200 mm in height with air release valve on top and flangedconnection to riser, drainarrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required (DR code No.18. 20)` |
| 27 | `NS Item -13Providing, installation, testing and commissioning of stainless steel Y- strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia hole with stainless steel flange. 100 mm dia.(DSR code No. 18.15.2)` |
| 28 | `NS Item -Supplying and fixing of fire brigade connection of castironbody with gunmetal male instantaneous inlet|couplings complete with cap and chain as reqd, for suitable dia MS pipe connection conforming to IS 904AS REQUIRED .2 WAY -100 mm dia MS pipe (DSRcode No. 18.19.1).` |
| 29 | `NS Item -SITC of 9 Itr capacity Fire Bucket made in 16 guage MSfilled by 9 kg sand withMSangle standarrangement of hanging 6 buckets with shed having• (NS)` |
| 30 | `NS Item -SITCof ISImarked IS:15683)portable ABCmultipurpose filled by 90% (MAP) mono amonioum phosphate powdernitrogen pressurised type fireextinguisher, Capacity 6 kg with 90% map complete in all resp.(N.S )` |
| 31 | `NS Item -SUPPLY AND INSTALLATION of ISI marked (ISI MARK15683) portable Co2 fire extinguisher of capacity 4.5 kg flat base including valve, dischargeone metar long hose of meter complete in all respect withexplosive certificate .(NS)` |
| 32 | `NS Item -AUTO GLOW EXIT SIGNS AND INDICATION SIGNS SIZE12 `x 6`,Indication every exit point,fire point,fire extinguisher. (N.S )` |
| 33 | `FIRE CHECK DOORSITC OF 46 mm steel fire check door of 120 minut fire rating confirming to bs 476 part -22 and is 3614 part-11 fabricated with 2 no, 1mm thick galvnized steel sheet sandwiching with proprietary fire resistant insulation materials in between. The door frames are manufactured from 1.5mm thick galvanized steel sheet pressed from to double rebate profile of size 143mm x 57 mm. the door frame and door shutters to finish with powder coatingSITC OF 2HR FIRE RATED METAL DOOR location- basement stair case, electrical cantrol room and all floor stir case where there is no natural vantilation (N.S)` |
| 34 | `NS Item -Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.6` |
| 35 | `NS Item -Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.5` |
| 36 | `NS Item -Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.4` |
| 37 | `NS Item -Supply installation,testing commissioningsprinkler flexible pipe 1500 mm (UL listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of875 PSI (BURST ) with branch line (inlet ) 25 mm NPT male thread to sprinkler head (outlet ) 15 mm NPTfemale thread with reducer ,nipple,2 side brackets, centerbracket, stockbar of following sizes complite as required. (DSR code No. 18. 25.4)` |
| 38 | NS Item -quartzoid bulb type brass sprinklers of rating 68 degree centigrade with required accessories UPRIGHTsprinkler type (DSR- 18.21.2) |
| 39 | `NS Item -Providing ,fixing, testing and commissioning of 15 mm dia quartzoid bulb type brass sprinklers of rating 68 degree centigrade with required accessories SIDEWALL (DSR- 18.21.3` |
| 40 | `NS Item -Proving, fixing, testing and commissioning of installation control valve of cast iron body, brass /bronze working1parts comprising of water moter alarm, bronze seatmechanical gong bell to sound continuous alarm when the wet riser / sprinkler system activates switch, cock valve complete with drain valve and bypass, test control box, ball valves MS PIPE OF REQUIRED SIZE, FLANGES, ORIFICE PLATE, GASKET ETC OF150 MM DIA (DSR code No.18 24.3)` |
| 41 | `NS Item -Providing, installation , testing and commissioning of non-return valve of following sizes confirming to IS 5312 complete with rubber gasket. GI bolt ,nuts, washers etc as required150 mm dia ((DSR code NO. 18.14.7)` |
| 42 | `NS Item -Supplying fixing ›testing and commissioning ofbutterfly vave of PN 1.6 rating with bronze /gunmetal seat duly ISI markedcomplete with nuts, bolt, washers gaskets conforming to IS 13095 OF FLOWING SIZES AS REQUIRED80mm dia. (DSR code NO. 18.11.4)` |
| 43 | `NS Item -14Providing, installation, testing and commissioning of stainless steel Y- strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia hole with stainless steel flange. 150 mm dia.(DSR code No. 18.15.3)` |
| 44 | `NS Item -SITC of 50 KG Mechanical Foam AFFF Trolley type fire extinguisher as per IS 16018 jet length minimum 10 mtr minimumdischarge time60-180sec, tested on 35kgf/cm2 with 2 kg co2 external fire extinguisher . location dg room, fire control room, ground foor of every block. (NS)` |
| 45 | `NS Item -SITC of 50 KG DCP (Dry Chemical Powder) Trolley type fire extinguisher as per IS 160181 jet length minimum 8 mtr minimum discharge time 40-50sec, tested on 30 kgf/cm2 ????ground floor of every block. (NS ) location dg room, fire control room,` |
| 46 | `NS Item -SITC of 5 kg modular type self operated on 680 temperature Clean Agenttype CEcertified FireExtinguisher filled with NAFPIV clean agent gas . location electrical shaft, electrical control room servar room other places where water or other camical are prohibited .. (NS).` |
| 47 | `NS Item -SITC of Clean Agent type ISI mark IS code 15683 2006Fire Extinguisher capacity: 2 kg location - o.t room ,nursing station ,labmachinry room pantry kitchen (NS)` |
| 48 | `NS Item -Providing laying , testing and commissioning of ( C) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees flanges,tapers,nuts bolt ,gaskets etc. And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required. DSR 2022 code no . 18.7.7` |
| 49 | `Providing laying , testing and commissioning of Manual Call Point- Available for flush or Surface Mounting.- Suitable for majority of conventional Fire Alarm System.- Front protection glass cover.- Unbreakable glass ABS plastic body.` |
| 50 | Providing laying , testing and commissioning of Fire Alarm Sounder |
| 51 | Providing laying , testing and commissioning of Smoke Detector - conventional type |
| 52 | `Providing laying , testing and commissioning of 04 Zone Fire Alarm Panel complies to BIS 2189 andTested by ERTL (N) and System Sensor.- 2 x 16 character backlit LCD display. (4 x 20 character, optional)- 64 / 128 / 256 Events logging facility with real time clock andkeypad. (optional)- Complete with integral power Supply, Installation, Testing andCommissioning and battery charger for - SMF battery.- NO/NC contacts for both fire and fault.- Switches to enable on board operation.- LCD and LED Indication for open, short circuit, Isolate, Fire ineach zone.` |
| 53 | `Providing laying , testing and commissioning of Zincallume water Tank 10 KLMOC: Zincalume Steel with PVC LinerRoof: Dome roof, HDG StructureGross Capacity: 10KL` |
| 54 | Fabrication, supply, insallation testing and commissioning of electrical control panel of cubical construction , floor mounted type - for overhead pump |
| 55 | Water Supply NA DG SETS `Designing, Supply and erection of DG set of capacity given below with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 plus (-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incomingcable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover /STD panelto incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications anddirections of Engineer-in-charge.The rating should be at 1500 RPM.a) Diesel Engineb) Alternatorc) Battery 24 V.d) Base Plate.e) suitable sq mm suitable core copper cable upto 40 metres.f) Tools, standard panelg) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT`s)10 KVA |
| 56 | Supply of 90 watt LED street light fitting . |
| 57 | Supply of 20 Watt LED Tube light fitting. |
| 58 | Supply and erection of copper pipe for split A.C. including making necessary connections and all patty. |
| 59 | Supply and erection of PVC drain pipe for split A.C. including making necessery connections and all patty |
| 60 | Supply of 36 watt LED recess Panel light fitting 600mmx600mm make including making necessary connections. |
| 61 | Supply of 36 watt LED surface Panel light fitting 600mmx600mm including making necessary connection |
| 62 | Supply ,Installation , Testing and Commissioning of 6 Zone Fire Alarm Panel with LCD Display, ested by ERTL (N) and System Sensor, 2x16Character Backlit LCD Display and 64/128/256Events Logging Facility, BMS Attachment, Lamp Test Features, Complete with Integral Power Supply and Battery Charger for SMF Battery, NO/NC Contacts for Both Fire, Fault and Switches to Enable on Board Operation Make Agni |
| 63 | Supply ,Installation , Testing and Commissioning of Wall Mount Manual Call Point:: Manual Call Point, Front Protection Glass Cover, ABS Housing with Gang Box, 24VDC. |
| 64 | Supply of DC Operation, High Sound Output with Low Current Consumption, Designed for Use within Fire Alarm Systems, Security Systems and Industrial Signaling Systems, It provides an Audio Warning, Which is Suitable for Place, Which Needs Audio Indication ProductSpecification |
| 65 | Supply ,Installation , Testing and Commissioning of Photoelectric Smoke Detector. |
| 66 | Supply ,Installation , Testing and Commissioning of 2 core 1.5 Sq mm Cable. |
| 67 | Supply ,Installation , Testing and Commissioning of fire extinguisher. |
| 68 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a any lead and lift also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (N.S) |
| 69 | (HSR-2023) |
| 70 | CONSTRUCTION OF PHC AT VILLAGE BAMLA BLOCK BHIWANI DISTRIC BHIWANI Please Enable Macros to View BoQ information |
