|
| 1 | Sub Head - I (Wiring Work) |
| 2 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required(a) Group B |
| 3 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 4 | Group B |
| 5 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 6 | a) 20 mm |
| 7 | b) 25 mm |
| 8 | c) 32mm |
| 9 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel / PVC conduit as required. |
| 10 | a) 3 X 1.5 sq.mm |
| 11 | b) 6 X 1.5 sq.mm |
| 12 | c) 3 X 4 sq.mm. |
| 13 | d) 6 x 4 sq. mm |
| 14 | e) 3 X 6 sq.mm |
| 15 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 16 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required |
| 17 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required |
| 18 | 6 Module (200mmX75mm) |
| 19 | 8 Module (125mmX125mm) |
| 20 | 12 Module (200mmX150mm) |
| 21 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 22 | 5/6 A switch |
| 23 | 3 pin 5/6 A socket outlet |
| 24 | 15/16 A switch |
| 25 | 6 pin 15/16 A socket outlet |
| 26 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 27 | Sub Head - II (Fittings & Fixtures)Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. |
| 28 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 29 | Supplying and fixing two module stepped type electronic fan regulator on the existing piano type including connections but excluding piano plate etc. as required |
| 30 | LED Batten light (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140 270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) |
| 31 | 36 watt |
| 32 | Supplying and replacement, installation, testing & commissioning of 250 mm sizes white body Sweep PVC body Fresh Air Ventilator Exhaust fan with louver shutter in the existing opening of toilet room/kitchen etc i/c connection with 1.5 sqmm FRLS PVC insulated wires and fibre sheets etc as reqd. |
| 33 | S/I/T/C of 5 Lts. Capacity storage Geysers with following specification :-Mount type – Vertical Type – Storage Water HeaterCapacity – 5 Lt.Energy rating – 5 StarTechnology – Sale care TechnologyTemperature Controller – Adjustable ControllerBar Pressure – 8Wattage – 2000 WVoltage – 230 VFrequency – 50 HzRate Max. Temp -75 DegreeOuter Body – MSInsulation – PUFHeating Element Incoloy - 800 |
| 34 | S/I/T/C of 25 Lts. Capacity storage Geysers with following specification :-Mount type – Vertical Type – Storage Water HeaterCapacity – 25 Lt.Energy rating – 5 StarTechnology – Sale care TechnologyTemperature Controller – Adjustable ControllerBar Pressure – 8Wattage – 2000 WVoltage – 230 VFrequency – 50 HzRate Max. Temp -75 DegreeOuter Body – MSInsulation – PUFHeating Element Incoloy - 800 |
| 35 | Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4 5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP 66,IK-10, CRI >80 , under voltage and over voltage protection, EMI EMC as per CISPR -15 , lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement i/c timer for on/off timing system with connection etc. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). |
| 36 | 70 watt |
| 37 | S/I/T/C of weatherproof box made out of hot moulded SMC sheet with clamp, neutral link, strip, gland, thimble and 1 No. 10 Amps. SP MCB complete with inter connection, earthing etc as reqd.(Box Size: 300mm X 200mm X 105mm) |
| 38 | Supplying, installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim . |
| 39 | 18 watt |
| 40 | Supplying, installation, testing & Commissioning of Surface/Wall Mounted 1 X 10W LED Tube With 2 feet MS Batten Fitting, LED Tube should have extruded aluminium housing for efficient heat dissipation. Total system Lumen of 10W Led should be 1700 or above in Cool day Light(5700K to 6500K), Power factor>0.90, CRI>80. Complete with Mounting Brackets & accessories as required with connections etc. complete as reqd |
| 41 | SITC of wall mounted cabin fan 450 mm sweep suitable for operating on 230 volt single phase AC supply i/c connection with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable earth etc as reqd. |
| 42 | SITC of wall/celling mounted type kitchen chimney of 600mm, nominal width, air flow not less than 1400 m3/hr. at rated speed having curve glass, three speed control, thermal auto clean & filter less technology, touch control with motion sensors and metal oil collector cup features etc. aluminium flexible pipe of 150 mm dia upto 4 mtr. alongwith all accessories etc. complete as reqd. i/c OEM shall give minimum warrantee of 2 years for product and 10 years for motor |
| 43 | SITC of Single Wall Light suitable for retrofit 7.5 Watt Led Lamp. Base of the Wall Light is made of Spun CRCA Sheet and is Circular/oval shape or any other shape as approved . Arm of the wall light is made of mild steel tube. Holder Cap and design is made of CRCA sheet duly approved colour Plated. Base and Arm are duly Powder coated in approved Colour Shade , all colour , shape and model to be approved by the client or Engineer in charge . Mounting Plate is made of CRCA Sheet . Hardware parts are made of mildsteel duly plated. E-27 Lamp holder is fitted in the fixture . Frosted Glass diffuser is provided with the fixture and E-27 LED bulb 7 W in warm/cool light to be provided with the fixture etc as required. |
| 44 | SITC of Double Wall Light suitable for retrofit 7.5 Watt Led Lamp. Base of the Wall Light is made of Spun CRCA Sheet and is Circular/oval shape or any other shape as approved . Arm of the wall light is made of mild steel tube. Holder Cap and design is made of CRCA sheet duly approved colour Plated. Base and Arm are duly Powder coated in approved Colour Shade , all colour , shape and model to be approved by the client or Engineer in charge . Mounting Plate is made of CRCA Sheet . Hardware parts are made of mildsteel duly plated. E-27 Lamp holder is fitted in the fixture . Frosted Glass diffuser is provided with the fixture and E-27 LED bulb 7 W in warm/cool light to be provided with the fixture etc as required |
| 45 | SITC of Video call bell with display with necessary specification Video Door Bell Pro 2K Resolution with 3MP Lens,.140° Field of Vision, Night Vision, 2W Speaker Person Detection, Visitor Log, Intruder Alarm, Works with Alexa, Wireless Chime with 36 tunes with all accessories etc. complete as required. |
| 46 | SITC of Electronic main door lock with necessary specification Double Door Compatible , Stainless Steel Body with 5 Computerized Keys, 12-24V DC Powered High-Security Lock for Homes, Offices i/c testing commissioning etc. complete as reqd. |
| 47 | Supplying, installation, testing and commissioning of 900 rpm 300mm sweep exhaust fan complete with louvers/ shutters in the existing opening i/c making the hole to suit the size of the above fan making good the damage & connections etc. complete as reqd. |
| 48 | Sub Head - III (Panel, DB & Cabling)Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 49 | 6 way , Double door |
| 50 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 51 | 8 way (4 + 24), Double door |
| 52 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 53 | Single pole |
| 54 | Single pole and neutral |
| 55 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 56 | Supplying , Laying and fixing following size of PVC insulated and PVC sheathed al. conductor armoured power cable of 1.1 KV grade of following ways as reqd. (a) 3 x 10 sq.mm. cable on surface |
| 57 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. |
| 58 | 3 X 10 sq. mm (22mm) |
| 59 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 60 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 61 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required. |
| 62 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 63 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required |
| 64 | 1 Run of cable |
| 65 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required |
| 66 | 4 Pair |
| 67 | Supplying and fixing of RJ-45 modular type computer socket outlets alongwith modular plate & modular hot dipped galvanised box in recessed/surface stel conduit etc. complete as required. |
| 68 | Supplying, installation, testing and commissioning of 1 meter long Cat 6 RJ 45 Patch cord etc. as required. |
| 69 | Supplying, installation, testing and commissioning of LC adaptor to internally connect in LIU etc. complete as required. |
| 70 | Sub Head - IV (Dismantle of Material)Less Credit of following Old dismantle materials as and where basis etc. complete as required. |
| 71 | Assorted Copper wire |
| 72 | 18-22 Watt Fitting |
| 73 | Ventilation Fan |
| 74 | Flood Light |
| 75 | Ceiling Fan |
| 76 | SP MCB DB |
| 77 | Switch/Socket/Regulator (Assorted) |
| 78 | MS Box/Conduit/Angle iron Board/Strip etc. Please Enable Macros to View BoQ information |
