|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m (one point five metre) in width or ten square metre on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m (one point five metre), including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m (fifty metre) including carriage of materials with in all leads, lifts and other incidentals. |
| 2 | Providing and laying in position cement concrete 1:4:8 (one cement : four fine sand : eight graded stone aggregate) 40 mm (forty millimetre) nominal size of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials with in all leads, lifts and other incidentals. |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 4 | (i) Foundations, footings, bases of columns, etc. for mass concrete, including carriage of materials with in all leads, lifts and other incidentals. |
| 5 | (ii) Columns, Pillars, Piers, Abutments, Posts and Struts, including carriage of materials with in all leads, lifts and other incidentals. |
| 6 | Providing and laying in position reinforced cement concrete 1:1.5:3 (one cement : one point five sand) : three graded stone aggregate 20 mm (twenty millimetre) nominal size) of specified grade excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer - in- charge . |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size) including carriage of materials with in all leads, lifts and other incidentals as per entire satisfaction of Engineer-in-charge. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding complete upto plinth level including the cost of binding wire and above on floor all level. Thermo-Mechanically Treated bars of grade Fe-500D including carriage of materials with in all leads, lifts and other incidentals as per entire satisfaction of Engineer-in-charge. |
| 9 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of red lead paint in beams, joists, channels, angles, tees, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters purlins connected to common rafters and the like including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer - in- charge. |
| 10 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals as per direction and entire satisfaction of Engineer-in-charge. |
| 11 | 15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including complete as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. |
| 12 | Finishing walls with Acrylic smooth exterior paint of required shade. New work (Two or more coats applied @ 1.67 litre/ 10 sqm. (at the rate of one point six seven litre per ten square metre) Over and including priming coat of exterior primer applied @ 2.20 litre/10 sqm. (at the rate of two point two zero litre per ten square metre) including carriage of materials with in all leads, lifts and other incidentals as per entire satisfaction of Engineer-in-charge. |
| 13 | Lettering with black Japan paint of approved brand and manufacture, including carriage of materials with in all leads, lifts and other incidentals as per entire satisfaction of Engineer-in-charge. Please Enable Macros to View BoQ information |
