|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches of drains not exceeding 1.5 m in width or 10 sqm on plan, including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | Stone soling properly hand-packed filling interstices with spalls and consolidating with Rammer 100 mm spread thickness including carriage of materials within all leads & lifts & other incidentals complete in all respect. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level 1:5:10 (1 Cement: 5 fine sand): 10 graded stone aggregate 40 mm nominal size. Cement-OPC ACC, ULTRATECH, AMBUJA, BIRLA, JK CEMENT |
| 4 | Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. |
| 5 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand): 4 graded stone aggregate 20mm nominal size. |
| 6 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. |
| 7 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size). Cement - OPC ACC, ULTRATECH, AMBUJA, BIRLA, JK CEMENT |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars- Fe 500 -TATA, TISCON, SAIL, KAMDHENU |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers - Above plinth level |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 12 | 15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete /stone walls for interior plastering upto floor all level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. 1:6 (1 cement: 6 fine sand) Cement - ACC, ULTRATECH AMBUJA, BIRLA, JK CEMENT |
| 13 | Providing and fixing factory made PVC door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and jomed with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S, serews of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. |
| 14 | 30mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2mm (‡ 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1mm (+ 0.1 mm) wall thickness.The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2mm (+ 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20mm and 1 mm (+0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as permanufacturer's specification and direction of Engineer-in-charge. |
| 15 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment) |
| 16 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge.Powder coated minimum thickness 50 micron aluminium with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.- Ebca, Dorma, Ozone. Classic & Everite |
| 17 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868), transparent or dyed to required colour or shade, with nuts and screws etc. completewith all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. - Ebca, Dorma, Ozone. Classic, & Evertite: 300 x 16 mm |
| 18 | Providing and fixing ISt marked M.S. pressed butt hinges bright finished with necessary screws etc. All accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals Ebca, Dorma, Ozone. Classic & Everite: 125 x 65 x 2.12 mm |
| 19 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete All accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals - Ebca,Dorma, Ożone. Classic & Everite :75 x 47 x 1.70 mm |
| 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.- Ebca,Dorma, Ozone. Classic & Everite :300x10 mm |
| 21 | Providing and fixing aluminium tower bolts, ISI marked, anodised anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.- Ebca, Dorma, Ozone. Classic & Everite :200x10 mm |
| 22 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. with all accessories as required as per the directions of Engineer-in-charge including carriage of materials with in all leads,l lifts and others incidentals - Ebca, Dorma, Ozone. Classic & Everite |
| 23 | Providing and laying Ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement andmatching pigment etc., complete KAJARIA, JOHANSON, NITCO, ASIAN, SOMANY |
| 24 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 25 | Distampering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work:IC Dulux), ASIAN, BURGER |
| 26 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand andmanufacture- ASIAN, ICI(Dulux),BERGER |
| 27 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. TATA, JINDAL |
| 28 | Providing and fixing 0.60mm (Zero point sixty millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zine coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with screws preprinted iron Jor L hooks, bolts and nuts 6mm (Six millimetre) dia metre with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. TATA, JINDAL |
| 29 | Providing and fixing MS BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid seprately)-TATA JINDAL |
| 30 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main Trunners to be suspended from ceiling using Gl slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm Gl adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T. bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part 1, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm. backed with non woven tissue on the back side, having an NRC Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. |
| 31 | Disposal of moorum/building rubbish/ malba/ simila transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more |
| 32 | Providing and fixing Display Board of size 3'0\\" x 2'0\\" indicating Name of Work, Name of Head, Date of Commencement, Date of completion, Sanctioned Amount, Expenditure, Name of Ward Councilor and Name ofContractor, at prominent place Please Enable Macros to View BoQ information |
