|
| 1 | Civil works:- Dismantling brick or stone masonry above 3.0m height including stacking the useful materials for re-use and removing the debris away from work site within 50m. Lead including cost of labour, T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge. |
| 2 | Dismantling & removing old damaged cement concrete and cleaning the surface and removing the debris away from worksite, stacking the useful materials for re-use including cost of all labour, T&P required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 3 | Dismantling and removing old damaged tile flooring upto required depth including stacking the useful materials for re-use and removing the debris away from work site within 50m. lead etc. complete as per direction of Engineer-in-charge. |
| 4 | Scrapping out old paints from wall with scrapper, sand papering, washing with soap or soda water including scaffolding charges etc. complete in all respect as per specification & direction of Engineer-in-Charge. |
| 5 | Earth work in excavation of foundation trenches in all kinds of soil up to the required depth including Moorum, stony earth and earth mixed with boulders except sheet rocks and boulders requiring blasting including dressing, leveling the bed and depositing the excavated materials away from work site with initial leads and lifts, T&P shoring, shuttering and dewatering if required etc, complete as directed by Engineer-in-charge. |
| 6 | Carriage of surplus Earth/ Debris by Mechanical Means upto 5KM. Lead including Cost of all Labour for Loading & Unloading Charges, Transportation and spreading in layers at the dumping area etc. Complete as per specification & direction of Engineering-in-charge. |
| 7 | Supplying, & filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc., complete (Measurement will be taken on finished compacted section) as per specification and direction of Engineer-in-charge. |
| 8 | Cement concrete (1:3:6) in foundation and floors using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete, watering, curing etc, complete to required levels laid in layers not exceeding 0’-6” thick in each layer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 9 | R.C.C work of M-25 Grade having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 20mm down graded size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills etc. as per specification and direction of the Engineer-in-Charge.(a)Column Footing |
| 10 | (b)Column upto Plinth |
| 11 | (c )Plinth Beam |
| 12 | (d)RCC Lintel band, Stage side wall, Door opening |
| 13 | Cutting, straightening coiled or bent up M.S. Rod or tor steel (TATA/ SAIL/Vizag/ Zindal etc)including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 14 | Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in FOUNDATION, PLINTH AND BASEMENT and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 15 | Fly Ash Brick masonry using Fly Ash Bricks (25cmX12cmX8cm) having crushing strength not less than 75Kg/sqcm with dimensional tolerance +2% in cement mortar (1:6) after immersing the bricks for six hours in water before use in SUPERSTRUCTURES in all floors including splays, cutting, circular moulding, corbelling, champhering and similar such type of works, scaffolding, watering, curing, including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 16 | Plain Cement concrete (1:2:4) using 12mm size hard crusher broken granite stone chips of approved quality and from approved quarry including lowering, laying, compacting concrete laid in layers not exceeding 0’-6” thick to required depth & level with watering, curing including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 17 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 18 | Providing fitting and fixing of vitrified floor tiles of size 600mm x 600mm x 10mm of Plain (Ivory) approved make & colour laid over 20mm thick cement mortar bed of prop.(1:4) to proper slope & level joined with neat cement slurry with approved colour pigment to match the colour of tiles including watering and curing, cost of all labour, T&P, cost, conveyance and royalty, taxes of all materials etc. complete in all respect as per direction of Engineer-in-charge. |
| 19 | Providing, fitting and fixing of GRANITE TILES of size up to 0.40Sqm. (20mm thick) size of approved quality & shade laid over 20mm thick cement mortar of prop. (1:4) to proper slope & level jointed with neat cement slurry with approved colour pigment to match the colour of tile including watering, curing, cost, conveyances, taxes of all materials and cost of all labour with T&P required for the work etc. complete and as per specification & direction of Engineer-in-charge. |
| 20 | Providing, fitting and fixing of Mild steel tubular trusses made out of ERW tube, Grade YST-210 confirming to ISS No.1161/79 (3rd revision duly painted with red oxide primer) including hoisting, joist and purlins and placing in position including cost, conveyances, taxes of all materials, cost of labour, T&P etc complete as per approved design and direction of Engineer-in-charge. |
| 21 | Providing, fitting and fixing of pre-coated Galvanised Iron profile sheet in roofing of approved quality and make in position with cost, conveyances, taxes of materials, cost of labour, T&P required for the work etc complete as per direction of Engineer-in-charge. |
| 22 | Providing, fitting and fixing of Plain G.I. Sheet Gutter sheet in rofing of approved quality and make in position with cost, conveyances, taxes of materials, cost of labour, T&P required for the work etc complete as per direction of Engineer-in-charge. |
| 23 | Supplying, fitting & fixing of 4” Dia P.V.C Rain Water down Pipes including cost, conveyances, taxes of all Materials, cost of all labour & T&P etc. required for the work etc. complete in all respect as per specification & direction of the Engineer-in-charge. |
| 24 | Painting two coats with approved synthetic enamel paints of approved colour, shade to iron work including cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 25 | Providing, fitting and fixing of VOX-Infratop (SV 08) soffit, false ceiling of panel sizes of 300mm X 2700mm, resistance to moisture and water fixed on G.I. seciton as per approval specification to be suspended from roof and jointing materials including cost of all materials, labour, T&P etc complete in all respect as per direciton of Enginer-in-charge. |
| 26 | Painting two coats with fungal resistance weather seal coat of approved shade over a coat of primer by means of brush to out side surface of walls after cleaning the surface including watering, curing etc complete in all floors including cost, conveyance, taxes of all materials, labours, sundries, T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. |
| 27 | Providing, and fixing of Factory made single extruded WPC choukaths for frames of doors & windows of size 65mm X 125mm of approved quality including cost, conveyances, taxes of all materials, labour, T&P etc complete as per direction of Engineer-in-charge. |
| 28 | Supplying, fitting and fixing of 32mm thick Flush door shutter with flush door block board 30mm thick BWR block both side teak (Green ply/ Allwin) both side laminated with 1mm thick sunmica fitted and fixed complete in all respect including cost of iron fitting, aluminium fittings, all labours, T&P etc as per specification and direction of Engineer-in-charge. |
| 29 | Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing using 50mm outer diameter of 2mm thick circular pipe of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes @0.90m C/C & stainless square pipe bracing of size 32X32X2mm in stair including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge. |
| 30 | E.I. Works:- Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC conduit with 5Amp, 250V Modular make (Legrand/Panasonic/Hagar/Schinider) of PVC Conduit pipe :- (AKG/Sudhakar/Norpack/ Precision) switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL) Light Point Group A |
| 31 | - do - to Light Point Group B |
| 32 | - do - to Light Point Group C |
| 33 | Supply and fixing of up and down IP65 10watt Lights complete in all respect as per direction of engineer incharge(Make-Havells/ Cromption/ wipro/ panasonic/ Philips) |
| 34 | Supply and fixing of 10watt in ground IP67 waterproof panel Lights complete in all respect as per direction of engineer incharge(Make-Havells/ Cromption/ wipro/ panasonic/ Philips) |
| 35 | Supply and fixing of 15 watt per meter profile led light Lights complete in all respect as per direction of engineer incharge(Make-Havells/ Cromption/ wipro/ panasonic/ Philips) |
| 36 | Supply and fixing of 24watt (1 x 1) LED round/ square surface ceiling panel Lights complete in all respect as per direction of engineer incharge(Make-Havells/ Cromption/ wipro/ panasonic/ Philips) |
| 37 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia |
| 38 | 2 X 2.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia for Invertor wiring |
| 39 | 2 X 4 sq.mm +1 X 1.5 sq.mm -do- |
| 40 | 4 X 10 sq.mm +2 X 4 sq.mm -do- |
| 41 | 4 X 6 sq.mm +2 X 2.5 sq.mm -do- |
| 42 | S/F of 125 A cubical panel board made of 16 SWG C.R sheet with powder coated with provision of following items 125A,25 Ka mccb as incomer ,100A changeover,100ka type1+ 2 spd,MFM,Indicator,on,off ,trip indication8 nos 63 A 4P MCB 10 ka as outgoing feeder with fabrication erection testing & comissioning of total enclosed panel board of size 1200*900*450mm with 200Acu busbar 415V 4strip internal connection & provision for termination of incoming & out going cable , earthing flat etc in complete as per the direction of engineer incharge (Make : Schneider /legrand/siemens/hager) |
| 43 | Supply of 4Cx16sqmm PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / V-Guard/ Gloster) |
| 44 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 45 | P.H. Works:- Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge.110mm dia U-PVC SWR pipes(Supreme/Ashirvad) |
| 46 | 110mm U-PVC door bend |
| 47 | 110mm U-PVC plain bend |
| 48 | 110mm dia U-PVC off set |
| 49 | 110mm dia U-PVC clamp |
| 50 | 20mm dia rigid UPVC pipes |
| 51 | 50mm dia UPVC class-IV pipes |
| 52 | Supplying all materials, labour, T&P and cutting metalled road for taking the GI pipe/sewer line through and making good to the damages including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 53 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm |
| 54 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inside size 760mmx760mmx460mm |
| 55 | Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inside size 910mmx910mmx910mm |
| 56 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class 3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.160mm dia u-pvc pipe alround concrete |
| 57 | 200mm dia u-pvc pipe alround concrete Please Enable Macros to View BoQ information |
