|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge , thickness, including Nainital or similar pattern roof covering etc, complete all as specified and as directed. |
| 2 | S&F 0.63 mm thick Galvanised , corrugated mild steel shetting with two corrugations side lap, fixed with coach screws, washers, and L- type or J- type or cranked hook bolts in lie of screw in roofs , walls etc. with grade of zinc coating 275 etc, complete all as specified and as directed. |
| 3 | S&F 0.63 mm thick Plain ,galvanised , mild steel sheeting , in ridges, hips, vally gutters, drip , straight flashings and fixed with coach screws, washers, and L-type or Jtype or cranked hook bolts in lie of screw in roof , wall etc. (length and girth as fixed ) with grade of zinc coating 275 mm etc, complete all as specified and as directed. |
| 4 | Refixing for Galvanised, corrugated mild steel sheeting with two corrugations side lap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed. |
| 5 | M&L for painting steel newly untreated Surfaces two coat of synthetic enamel paint over one coat of red oxide zinc chrome of any description, not otherwise descri-bed,over 10cm width or girth, complete all as specified and as directed. |
| 6 | M&L for painting steel Old Surfaces two coat of synthetic enamel paint of any description, not otherwise descri-bed,over 10cm width or girth, complete all as specified and as directed. |
| 7 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed. |
| 8 | Refixing for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 9 | S&F for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed. |
| 10 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and as directed. |
| 11 | M&L for Second class soft-wood clean sawn in scantlings, complete all as specified and as directed. |
| 12 | Dismantling of boarding, any description , fixed in any position with nails etc, complete all as specified and as directed. |
| 13 | M&L for 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as use in eaves board, complete all as specified and as directed. |
| 14 | M&L for painting wooden newly untreated Surfaces two coat of synthetic enamel paint over one coat of pink primer of any description, not otherwise described,over 10cm width or girth, complete all as specified and as directed. |
| 15 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 16 | M&L Hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 17 | M&L for Cement concrete type D- 2, 1:4:8 100mm thick(40mm graded aggregate) as use in sub base, complete all as specified and as directed. |
| 18 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cm1:4, complete all as specified and as directed. |
| 19 | M & L Non - skid Ceramic Colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 20 | M&L for Virified Ceramic Dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 21 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame), complete all as specified and as directed. |
| 22 | Taking down Chowkhats or frames n exc 1.5 sq. m each but with shutters (without taking off shutters from the frame), complete all as specified and as directed. |
| 23 | Refixing in Same Opening Chowkhats or frames n exc 1.5 sq. m each but with shutters (without taking off shutters from the frame), complete all as specified and as directed. |
| 24 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed. |
| 25 | S&F for Factory Made Solid PVC Moulded with particle board core Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed. |
| 26 | Refixing in Same Opening Chowkhats or frames exc 1.5 sq. m but n exc 4sqm each but with shutters (without taking off shutters from the frame), complete all as specified and as directed. |
| 27 | M&L for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed 2nd class softwood, complete all as specified and as directed. |
| 28 | M&L for Plain, framed,panelled shutters 2nd class soft (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed. |
| 29 | M&L for Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 30 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 31 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 32 | M&L for Sheet glass 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including Hacking out old broken glass, complete all as specified and as directed. |
| 33 | S&F in repair Butt hinges 50mm long, Medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 34 | S&F in repair Butt hinges 75mm long, Medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 35 | S&F in repair Aluminium anodised, barrel tower bolts 75mm long of extruded section and fixed, complete all as specified and as directed. |
| 36 | S&F in repair aluminium handles 75mm long, cast type, stove enamelled black, complete all as specified and as directed. |
| 37 | S&F in repair Aluminium alloy 150mm long, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 38 | Note:- Schedule of credit Rs 89,911.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
