|
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume)Foundation for Steel structure staging |
| 3 | Supplying all materials, Labours, tools & doing 75 B, one brick flat soiling (70 mm) in foundation trenches joints filled with local sand as per specification & direction of E/I. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing designation 75B Brick work in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening carriage of materials, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I. |
| 8 | Providing designation 75B Brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints cost of screening, carriage of materials, scaffolding, raking out joints to 15mm. depth , curing , taxes and royalty all complete as per building specification and direction of E/I. |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 11 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 12 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 13 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 14 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 15 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 16 | Centering and shuttering including strutting Propping etc and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 17 | Centering and shuttering including strutting Propping etc and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 18 | Centering and shuttering including strutting Propping etc and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | Centering and shuttering including strutting Propping etc and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 20 | Centering and shuttering including strutting Propping etc and removal of form for Weather shade, Chajjas, corbels etc., including edges |
| 21 | Providing 6mm. cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 22 | Providing 12mm. cement plaster (1:6) with clean coarse sand of F.M. 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 23 | Providing 12mm. cement plaster (1:3) with punning with clean coarse sand of F.M. 1.5 including cost of carriage, screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 24 | Supplying, fitting and fixing M.S. grill made of 20mm x 6mm M.S. flat asper approved desing and drawing, properly fabricated with joints continuous fillet, welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. |
| 25 | Supplying of 50x50x6mm size angle for chaukhat in windows |
| 26 | Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I. |
| 27 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube. (40mm dia 3mm thick) |
| 28 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces |
| 29 | Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from mercial mild steel sheet of 1.60 mm thickness,including inges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of sectionx25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical eans,including M.S. pressed butt hinges 2.5 mm thick with ortar guards,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directedby Engineer-in-charge: Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 30 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 31 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 32 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 33 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 34 | Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 35 | Providing two coats of synthetic enamel paint of approved shade and make over red lead paint over steel surface including cleaning the surface thououghly, scaffolding and taxes all complete as per building specifications and direction of E/I |
| 36 | Making Plinth Protection 50 mm thich of Cement Concrete (1:3:6) over 75 mm thick bed fo dry brick ballast - do-do- E/I |
| 37 | Providing 250mm wide brick drain in cement mortar(1:6) with av .150 mm clear depth and 250 mm apron including cost of E/W involved, with 75mm cement concrete (1:4:8) over one brick flat soling designation 100A brick in proper grade and slope at the base, the drain duly plastered in C.M. (1:3) with punning over exposed surface. All complete as per building specifications and direction of E/I |
| 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter |
| 39 | Earth work excavation in foundation trenches in foundation trenches in ordinary soil (vide classification of soil item - B) & disposal of excavated earth obtained to a distance up to 50M including all lift leveling, ramming the foundation trenches removing root of trees, shrubs all complete as per approved design. |
| 40 | Providing 25mm thick damp proof course with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6mm six graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, and mixing cement concrete in mixer with 5% cico or any other approved water proofing compound and placing in position, striking, curing, taxes and royalty all complete, as per building specification and direction of E/I. |
| 41 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 42 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) -do- -do- all complete job.With \\" A \\" grade White 15 X 15 cm Tiles |
| 43 | Providing 25mm thick first class PS flooring (1:2:4) with stone chips in two layers bottam layer 19mm thick (1:2:4) with 12mm to 6mm size graded stone chips and top layer 6mm thick (1:2) with 6mm down stone chips in pannels including cost of curing, flinishing the surface smooth by rubbing with carborandum stone, texes and royalty with all complete as per building specification and direction of E/I. |
| 44 | Supplying, fitting and fixing 20 gauge GCI sheet gate fitted on M.S angle frame of size 60 x 60 x 6 mm, including cost of fabrication, pro viding necessary locking arrangement with hackle and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 45 | Providing two coat of snowcem of approved shade and makes over a cost of cement primer on new surface including preparing thr plastered surface smooth with sand paper, scaffolding curing and taxes all complete as per building specification and direction of E/I. |
| 46 | Providing two coats of synthetic enamel paint of approved shade and make over a coat of primer over steel surface including preparing the surface after cleaning , removing dust, dirt scales & grease & cleaning tje surface all complete as per building specification and direction of E/I |
| 47 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 48 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing and 1.5mm cement punning including curing, carriage of water with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 49 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 50 | Providing 250mm thick brick jali work in C.M. (1:8) in superstructure with designation 75A brick and approved quality of clean coarse sand of F.M. 2 to 2.5, finished with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finished the holes, screening carriage of materials, scaffolding, raking out joints to 15 mm depth, curing taxes and royalty all complete, as per approveddesign, building specification and direction of E/I. |
| 51 | Providing following materials as filter media in the pit of approved quality & size in layers as per drawing and direction of engineer in charge all complete job with all taxes and royalty all complete as per building specification and specification and direction of E/I.(a) Agreegate 63 mm to 45 mm) M-008 |
| 52 | Providing following materials as filter media in the pit of approved quality & size in layers as per drawing and direction of engineer in charge all complete job with all taxes and royalty all complete as per building specification and specification and direction of E/I.(b) Agreegate 53 mm to 22.4 mm) M-007 |
| 53 | Providing following materials as filter media in the pit of approved quality & size in layers as per drawing and direction of engineer in charge all complete job with all taxes and royalty all complete as per building specification and specification and direction of E/I.(c) Agreegate 10 mm to 5 mm) M-010 |
| 54 | Providing following materials as filter media in the pit of approved quality & size in layers as per drawing and direction of engineer in charge all complete job with all taxes and royalty all complete as per building specification and specification and direction of E/I.(d) Coarse Sand M-001 |
| 55 | Providing Precast R.C.C M-200 with nominal mix of (1::4) slab of desired size with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse send of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes & royalty all complete as per building specification & direction of E/I. |
| 56 | Providing, fitting and fixing suitable M.S grating wt. not less than 1.25 kg at inlet of soak pit & cleaning of site for execution of work as per direction of EЛ. |
| 57 | Supplying materials and construction of brick masonry drain 150 mm width and 150mm depth with 250mm apron on both sides over 50mm thick P.C.C (1:3:6) over a brick flat soling, apron laying brick work in C.M (1:6). 12mm cement plaster (1:3) with punning on exposed surface all complete job as per specification and direction of E/I. |
| 58 | Wiring for light point/fan point /exhaust fan point/call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular switch, modular plate, suitable G.I. Box etc are required.Group B |
| 59 | Wiring for Circuit/submain wiring along with earth wire with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required(i) 1.7.1 2 x1.5sq.mm. + 1 x1.5sq.mm. earth wire |
| 60 | (ii) 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire |
| 61 | S/F Modular Boxes, base & cover plate: Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. (i) 1 or 2 Module (78mm x 78mm x 45mm) |
| 62 | (ii) 8/9 module (78mm x 230mm x 60mm) |
| 63 | (iii) 12 Module (135mm x 205 mm x 60 mm) |
| 64 | S/F Ceiling Rose: Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/ wooen block including connection etc as required. Make :- Anchor / Kona / Kany |
| 65 | S/F Batten / Angle Holder: Supplying and fixing batten / angle holder including connection etc as required. |
| 66 | S/F Panel mounted TP & N in Cubical Panel board:-Providing and fixing 100 amps TP & N disconnector fuse switch unit inside the exisiting panel board with ISI marked HRC fuses including holes in cubicle panel, making connections etc as required. |
| 67 | S/F S.P MCB DB :- Supplying and fixing following way, single pole and neutral sheet steel MCB distribution board 240 Volts on surface/recess, complete with tinned copper bus bar neutral bus bar, earth bar, din bar including powder Painted including earthing etc as required. (But without MCB/RCCB/ Isolator) 8 way single door |
| 68 | S/F Panel mounted change over :- Providing and fixing follwing capacity 4 Pole on load panel monted change over switches in existing cubical palel board making connetion, earthing the body etc as reauired. |
| 69 | Suppling Instalation festing and commissioning of following size celling fan 3 blades confirming to IS : 374:2019 including wiring the down roads of standard lenth (up to 30 cm) with 1.5 sqmm FR PVC insulated copper wire suitable for 230v 50 HZW, single phase supply etc complete as required. 1400mm (56'') ceiling fan. |
| 70 | S/F 10/12 watt LED Tube Light |
| 71 | Suppling and fitting 15/16 watt LED Bulb fitting |
| 72 | S/F Modular type switch/Socket :- Supplying and fixing of following modular switch/Soket on the existing modular plate & switch box including connections but encluding modular plate etc as required.5/6 amps 3 Pin Socket ourt let |
| 73 | 5/6 amps,one way switch |
| 74 | S/F Modular type electronic fan regulator :- Suppling and fixing stepped type fan regulator on the existing modular plate switch box including connections but encluding modular plate etc as required. |
| 75 | Supping XLPE/PVC insulated aluminium conductor armoured cable 1100 V grade with ISI mark three core solid/standed aluminium conductor with 6 mm thick 25 mm width MS spacer with G.I. earth wire 6 sqmm complete in an approved manner as per is 7098 3.5 core 25 sqmm |
| 76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.15 mm dia nominal bore CPVC Pipe |
| 77 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm dia nominal bore CPVC Pipe |
| 78 | Supply and fixing G.I. fittings of approved make all complete as per direction of E/I. ELBOWS -15 mm dia. |
| 79 | Supply and fixing G.I. fittings of approved make all complete as per direction of E/I. ELBOWS -25 mm dia. |
| 80 | Supply and fixing G.I. fittings of approved make all complete as per direction of E/I.TEE PLAIN -25 mm dia. |
| 81 | Supply and fixing G.I. fittings of approved make all complete as per direction of E/I.REDUCING SOCKET - 25 mm dia. |
| 82 | Supply and fixing G.I. fittings of approved make all complete as per direction of E/I.NIPPLE - 15 mm dia.. |
| 83 | Supply and fixing G.I. fittings of approved make all complete as per direction of E/I.NIPPLE - 25 mm dia.. |
| 84 | Supply and fixing G.I. fittings of approved make all complete as per direction of E/I.UNION SOCKET - 25 mm dia |
| 85 | Providing and fixing male-ended 15 mm dia Brass Bibcock of approved quality (wt. Not less than 350 gm.) With extra socket all complete as per specification and direction of E/I. |
| 86 | Providing and fixing 15 mm dia male-ended C.I. Stop cock (wt. Not less than 400 gms. ) of approved quality with extra socket all complete as per specification and direction of E/I. |
| 87 | Providing and fixing Gun metal full way valve of approved quality all complete, as per specification and direction of E/I.a) 25 mm dia and weight not less than 500grms- |
| 88 | Making holes in walls for laying UPVC pipes and restoring the same after pipe laying as per specification and direction of E/1. a) 125 mm thick wall |
| 89 | Supplying, fitting and fixing vitreous white glazed earthen wareI.W.C. Of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. 'P' trap 15liters C.I. Pull and let go flushing cistern of names or other I.S.S. Equipment make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.(A) 580 mm long(a) With 10ltr low level PVC cistern |
| 90 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 600 X 350 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 91 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of Perry of Hindustan or any other ISS approved make supported on painted C.I. or RS Brackets 32mm C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams 32mm PvC waste pipe 750mm long with brass coupling at one end and making plumber joints etc all complete as per specification and direction of E/I |
| 92 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.a. 110 mm dia. |
| 93 | Providing and fixing on wail face unplasticised PVC mouided fittings/ accessories tor unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion110 mm coupler |
| 94 | Providing and fixing on wail face unplasticised PVC mouided fittings/ accessories tor unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion110 mm dia. Bend 87.5° |
| 95 | Providing and fixing on wail face unplasticised PVC mouided fittings/ accessories tor unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansionSingle tee with door 110x110x110 mm |
| 96 | Providing and fixing on wail face unplasticised PVC mouided fittings/ accessories tor unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansionSingle tee with door 110x110x110 mm |
| 97 | Labour for laying & jointing uPVC pipe ….... all complete as per specification and direction of E/1. a).110 mm dia uPVC pipe. |
| 98 | Construction for 200/165mm dia drilled tube well for drilling in all kings of soil rock for installation of hand pump with D.T.H Rig machine all complete including rigs, all compressor and equipments as well as fuel lubricant for making 125/115mm dia boring etcand cost of trasporting rig machoine and other cehicle up to site work as per specification and direction of Engieer-in-charge.(a) From 0.00 M to 50.00 M below G.L. |
| 99 | Construction for 200/165mm dia drilled tube well for drilling in all kings of soil rock for installation of hand pump with D.T.H Rig machine all complete including rigs, all compressor and equipments as well as fuel lubricant for making 125/115mm dia boring etcand cost of trasporting rig machoine and other cehicle up to site work as per specification and direction of Engieer-in-charge.(b) From 51.0 M to 150.00 M |
| 100 | Providing all equipments and labour for lowering 125mm dia bule UPVC casing pipe as casing for protecting the side form falling during the process of driling all complete job including carriage of meterial to work site. |
| 101 | Supplying labour cements and calucuim chloride or bentonite solution and equipments for grouting to casing pipe all complete job including carriage of material to work site as per specification & direction of E/I. |
| 102 | Supplying all tools. Equipments and labour and doing wasting. Flushing and development of drilled tube well to give clean and clear water all complete as per direction of E/I. |
| 103 | Supplying all materials labours and equipment including 125mm dia GI/CI cap 125mm dia T/W properly all complete and taking it out as per sepcification & direction of E/I. (the cap will be property of department) |
| 104 | Supplying all tools. Equipments labours and lowering 32mm dia G.I (Medium) pipe in DT in 3mtr. Length all complete job as per direction of E/I. including carriage of materials. |
| 105 | Supplying all tools. Labour for fitting and fixing deep well cylinder wthe necessary connention rod all complete job s per specification & direction of E/I. |
| 106 | Supplying all materials, labour for fitting and fixing of india mark 11 Hnad pump with all accerssorles all job complete as per direction of E/I. including carriage of maerials. |
| 107 | Supplying all materials, labour and equipment for construcing PCC (1.2.4) circular platform arind each drilled tube well including 12mm thick cment plaster (1:4) with neat cement puning over exposed suface as per UNICFF design etc. all complete including carriage of materials. |
| 108 | Supplying all materials, labour and equipment for construcing PCC (1.2.4) drain as per UNICFF design etc. all complete including carriage of materials. |
| 109 | Cost of standard I S I mark Deep well hand pump for india mark ll, I S I 15500 (Part)2/2004 with fatest revisio including 12mmx3 meter long 8 no connecting rods made of bright bar electro galvanzed fitted with couper & normal stand assembly recommended for use with cylndor asembly suitable for bore well casing pipe |
| 110 | Cost of 32mm dia GT Pipe (Medium)3mtrs long screwed as both ends with seamless socket as per 15:1239(part 1990) |
| 111 | Cost of 125 mm dia blur UPVC Casing pipe per 1.5 12818/2016 CML No 5543459 |
| 112 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 113 | Supplying submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump Submersible pump set 100mm dia (with Polypropylene / Noryl Impeller) up to 20 stages2.00 HP |
| 114 | Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc all complete job as per direction of E/I. |
| 115 | Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I. |
| 116 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.50 mm nominal outer dia Pipes |
| 117 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 118 | Carriage of materials to worksite by any mechanical means including loading at querrysite / godown and unloading at worksite including all taxes, cost of labour, fuel, lubricants etc. all complete as as per building specification and direction of E/I.I. ) Bricks Lead (45) KM. |
| 119 | II) Sand Lead (25) KM. |
| 120 | III.) Stone Chips Lead (80)KM. |
| 121 | IV.) Cement & Steel Lead (15) KM. |
| 122 | Add 18 % GST |
| 123 | Add 1% LC Please Enable Macros to View BoQ information |
