|
| 1 | Labour charge for complete cleaning, washing of gates, vents & worksite for removing sand, soil, stone and other obstacles for easy working and smooth operation including all labours and materials as per specifications & direction of E/I. (For 2 No. H/R Gate, 4 Nos. U/S Gate Harna(North)Head work)- |
| 2 | Extraction of the old, damage & unserviceable gate, hoisting arrangement (U/S & H/R gate), falling shutter, platform and railing including all labours, tools and other equipment as per direction of E/I. (For 2 No. H/R Gate, 4 Nos. U/S Gate Harna(North)Head work)-)- |
| 3 | Providing fabricating, fitting & fixing of Embedding Component of H/R gate i.e. side track of 12 mm thick M.S. plate in form of built up section, bottom seal base beam of ISMB200, side seal seat (Downstream) & bottom seal seat both are 8mm thick & 80 mm wide S.S. flat bar, Gate sliding path(D/S) 8mm thick and 80mm wide stainless-steel Flat bar anchor bolt 16mm dia MS rod, Rubber Seal base Angle ISA 100 x 100 x 8 mm including the cost of materials, labours, welding, transportation & erection, painting with approved shade of paints as per design, drawing, specifications and direction of E/I. (For 2 No. H/R Gate Harna(North) Head work)-) |
| 4 | Providing fabricating, fitting & fixing of H/R gate of size 3450mm(W)x1300mm(H), skin plate of 12 mm thick M.S. plate, top & bottom girder ISMC225, horizontal girder ISMB200, end vertical girder ISMB225, 12 mm thick, 200mm wide M.S. plate,side & bottom seal seat-6mm thick & 60mm wide S.S. flat bar, gate sliding path (D/S) 6 mm thick and 80mm wide stainless-steel Flat bar ,Clamp plate for rubber Seal 6mm thick 60mm wide including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I: -(For 2 No. H/R Gate Harna(North)Head work)-) |
| 5 | Providing fabricating, fitting & fixing cross beam (For Hoist Beam) of ISMB200, including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specifications and direction of E/I. (Main beam already existing, only cross beam provided.(For 2 No. H/R Gate Harna(North)Head work)-) |
| 6 | Hoisting arrangement with Worm gear arrangement, Worm gear box with IEC flange and extended input shaft “Box 85”, M.S. Rod 63 mm dia. Spindle length 3 m (thread-2 tpi, depth of thread- 6mm) with coupling,Pipe for hoisting 2m including cost of all materials & labours, welding and accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting with approved shade of paints as per design, drawing, specifications & direction of E/I. (For 2 No. H/R Gate Harna(North)Head work)-) |
| 7 | Dismantling R.C.C. work/B.M. work including stacking serviceable materials in countable stack with 15 M, lead & disposed of unserviceable materials with all leads all complete as per direction of E/I. (For 2 No. H/R Gate Harna(North)Head work)-) |
| 8 | Providing and laying PCC or RCC( M200) with nominal mix of ( 1:1.5:3) various component of dam superstructure with approved quantity of 40 mm graded coarse aggregate of sand of requisite FM (2.5 to 3.0) washed and screened excluded cost of shuttering or form work as well as reinforcement, its cutting , bending , binding and placing but including necessary tools and plant and vibrating, curing, royality all taxes etc. All complete job as per specification and direction of E/I.SOR-2022,RCD,Pg. No.-477, Case 2 (For 2 No. H/R Gate Harna(North)Head work)-) |
| 9 | Supplying, fitting and fixing Rubber seal [Musical knot Rubber (125L x 44D x 12T) & flat rubber (75L x 12T)] and, inculuding welding accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting with approved shade of paints as per design, drawing, specification & direction of E/I. (For 2 No. H/R Gate Harna(North)Head work)-) |
| 10 | Providing chequered plate, railing and railing post for platform Chequered plate 6mm thick, Railing post: - ISA 75X75X6, Railing: – ISA 50X50X6 including cost of all materials & labours, welding and accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting with approved shade of paints as per specification & direction of E/I. (For 2 No. H/R Gate Harna(North)Head work)-) |
| 11 | Supplying, fitting and fixing Rubber seal [Musical knot Rubber (125L x 44D x 12T) & flat rubber (75L x 12T)] and, inculuding welding accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting with approved shade of paints as per design, drawing, specification & direction of E/I. (For 4 No. Sluice gate Harna(North)Head work)-) |
| 12 | Providing supplying, fitting & fixing 10 mm thick M.S. plate, bottom girder ISMC250,horizontal girder ISMB250, End vertical girder built up section – 10 mm thick, 250mm wide M.S. plate, Vertical stiffener- 10 mm thick, 250mm wide M.S. plate, Clamp plate- for rubber Seal 6 mm thick 70mm wide, of patching work (500mm height) for Under Sluice gate including cost of material , labours, welding ,transportation and erection ,incidental charge , painting with approved shade of paint as per design , drawing , specification an direction of E/I (for Headwork’s 04nos. Sluice gates of weir) – (For 4 No. Sluice gate Harna(North)Head work)-) |
| 13 | Providing Crane of 10 MT for fitting & fixing of Hoist beam, hoisting system & embedding etc. including all labours, tools and other equipment as per direction of E/I. (for 4 No. Sluice gate Harna(North) Head work)- |
| 14 | Supplying, fabrication and fixing of double rope drum with two stage gear pinion arrangement along with speed reduction unit of 10 MT capacity. (Including hoisting base, beam, brake shoe, chain sprocket,Steel wire rope , Wire rope U-clamp , Cadmium compound etc.) (Hoisting equipment must be of IS Standard/ISI Mark) (for 4 No. Sluice gate Harna(North) Head work)- |
| 15 | Supplying, Fabrication, Fitting & fixing of steel roof Shed consist main post ISA100x100x10, vertical and horizontal angle ISA 65x65x6, Tie beam, King post, Queen post, Horizontal support, Purlin, Strut for roof ,Door frame angle ISA 65x65x6, Cover Strip M.S. plate 100mm x 5xmm thick, GI sheet 0.4mm thick , including cost of material , labours, welding ,transportation and erection ,incidental charge , painting with approved shade of paint as per design , drawing , specification an direction of E/I (i) Clear Span = 3000mm(ii) Clear Height = 2430mm(iii) Length of Shed =18000mm (for 4 No. Sluice gate Harna(North) Head work)- |
| 16 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface thoroughly including cast of scaffolding and taxes all complete as per building specification and direction of E/I. (for 4 No. Sluice gate Harna(North) Head work)- |
| 17 | Providing two coats of painting with ready mixed paint of approved shade of and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. (for 4 No. Sluice gate Harna(North) Head work)- |
| 18 | Labour charge for complete cleaning, washing of gates, vents & worksite for removing sand, soil, stone and other obstacles for easy working and smooth operation including all labours and materials as per specification & direction of E/I. (For Lukluki Dity.H/R Gate)- |
| 19 | Providing extract the old damage & unserviceable hoisting system including all labours, tools and other equipment as per direction of E/I.(For Lukluki Dity.H/R Gate)- |
| 20 | Providing fabricating, fitting & fixing of Embedding Component of H/R gate i.e. side track of 10 mm thick M.S. plate in form of built up section, bottom seal base beam of ISMB 250, side seal seat(Down stream) & bottom seal seat both are 8mm thick & 80mm wide S.S. flat bar,Side Rubber Seal path 8mm thick and 80mm wide stainless steel Flat bar(Up stream),anchoring the side track by angle ISA100x100x8mm & anchor bolt 16mm dia MS rod,Side rubber seal path-6mm thick & 80 mm wideStainless steel plate including the cost of materials, labours, welding, transportation & erection, painting with approved shade of paints as per design, drawing, specification and direction of E/I. (For Lukluki Dity.H/R Gate)- |
| 21 | Providing fabricating, fitting & fixing of H/R gate of size 1570mm(W)x 1100mm(H), skin plate of 10 mm thick M.S. plate, top & bottom girder ISMC150, horizontal girder ISMB150, end vertical girder ISMB150, vertical stiffener 10 mm thick & 150 mm wide M.S. plate ,side & bottom seal seat-6mm thick & 70mm wide S.S. flat bar, Clamp plate for rubber Seal 6mm thick 60mm wide,Side rubber seal fitting angle ISA 65 mm x 65 mm x 6 mm, Bottom rubber seal fitting angle ISA 65mmx65mmx6mm,Rubber seal [Musical knot Rubber (125L x 44D x 12T) & flat rubber (75L x 12T)] including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I: -(For Lukluki Dity.H/R Gate)- |
| 22 | Providing fabricating, fitting & fixing of Hoist beam of H/R gate i.e ,main, cross & platform beam of ISMB200, anchor bolt of 16mm dia M.S. rod, including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I.(For Lukluki Dity.H/R Gate)- |
| 23 | Providing fabricating, supplying, fitting & fixing of Hoisting arrangement of carbon steel spindle of 63mm dia. and hoist nut of phosphor bronze metal, wheel handle of M.S. rod outer dia 700mm, top cover plate ,bottom plate, key, nut and bolt etc. including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints as per design, drawing, specification and direction of E/I. Dia. of spindle= 63mm, length of spindle= 2.5M (For Lukluki Dity.H/R Gate)- |
| 24 | Dismantling R.C.C. work/B.M. work including stacking serviceable materials in countable stack with 15 M, lead & disposed of unserviceable materials with all leads all complete as per direction of E/I.(For Lukluki Dity.H/R Gate)- |
| 25 | Providing & laying PCC/RCC M -200 with nominal mix of (1:1.5:3) in various components of dam super structure with approved quality of 20mm graded coarse agreegate of required grade as per design and approved quality of sand of requsite F.M (2.5 to 3.0) washed & screened excluding cost of shuttering or loam work as well as reinforcement its cutting,bending, binding & placing but including neccesary tools & plants & vibrating, curing,royalty all taxes etc.complete job as per as per specification and direction of E/I. (For Lukluki Dity.H/R Gate)- |
| 26 | Labour charge for complete cleaning, washing of gates, vents & worksite for removing sand, soil, stone and other obstacles for easy working and smooth operation including all labours and materials as per specification & direction of E/I. (For Maheshpur disty. H/R Gate)- |
| 27 | Providing extract the old damage & unserviceable hoisting system, gate and accessories including all labours, tools and other equipment as per direction of E/I.(For Maheshpur disty. H/R Gate)- |
| 28 | Providing fabricating, fitting & fixing of Embedding Component of H/R gate i.e. side track of 10 mm thick M.S. plate in form of built up section, bottom seal base beam of ISMB 250, side seal seat(Down stream) & bottom seal seat both are 8mm thick & 80mm wide S.S. flat bar,Side Rubber Seal path 8mm thick and 80mm wide stainless steel Flat bar(Up stream),anchoring the side track by angle ISA100x100x8mm & anchor bolt 16mm dia MS rod, including the cost of materials, labours, welding, transportation & erection, painting with approved shade of paints as per design, drawing, specification and direction of E/I.(For Maheshpur disty. H/R Gate)- |
| 29 | Providing fabricating, fitting & fixing of H/R gate of size 2135mm(W)x1150mm(H), skin plate of 10mm thick M.S. plate, top & bottom girder ISMC150, horizontal girder ISMB150, end vertical girder ISMB150, vertical stiffner 10mm thick & 150mm wide M.S. plate ,side & bottom seal seat-6mm thick & 60mm wide S.S. flat bar,Clamp plate for rubber Seal 6mm thick 60mm wide, Rubber seal [Musical knot Rubber (125L x 44D x 12T) & flat rubber (75L x 12T)] including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I. (For Maheshpur disty. H/R Gate)- |
| 30 | Hoisting arrangement with Worm gear arrangement, Worm gear box with IEC flange and extended input shaft “Box 85”, M.S. Rod 75mm dia. Spindle length 2.5 m (thread-2 tpi, depth of thread- 6mm) 8M GI pipe with coupling, including cost of all materials & labours, welding and accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting with approved shade of paints as per design, drawing, specifications & direction of E/I. (For Maheshpur disty. H/R Gate)- |
| 31 | Providing fabricating, fitting & fixing of Hoist beam of H/R gate i.e ,main, cross & platform beam of ISMB200, anchor bolt of 16mm dia M.S. rod,chequered plate, railing and railing post for platform Chequered plate 5 mm thick, Railing post: - ISA 75X75X10, Railing: – ISA 65X65X8 including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I.(For Maheshpur disty. H/R Gate)- |
| 32 | Dismantling R.C.C. work/B.M. work including stacking serviceable materials in countable stack with 15 M, lead & disposed of unserviceable materials with all leads all complete as per direction of E/I.(For Maheshpur disty. H/R Gate)- |
| 33 | Providing and laying PCC or RCC( M200) with nominal mix of ( 1:1.5:3) various component of dam superstructure with approved quantity of 40 mm graded coarse aggregate of sand of requisite FM (2.5 to 3.0) washed and screened excluded cost of shuttering or form work as well as reinforcement, its cutting , bending , binding and placing but including necessary tools and plant and vibrating, curing, royality all taxes etc. All complete job as per specification and direction of E/I. SOR-2022,RCD,Pg. No.-477, Case 2 .(For Maheshpur disty. H/R Gate)- |
| 34 | Labour charge for complete cleaning, washing of gates, vents & worksite for removing sand, soil, stone and other obstacles for easy working and smooth operation including all labours and materials as per specification & direction of E/I. (For Lakhanpahari disty. H/R Gate) |
| 35 | Providing extract the old damage & unserviceable hoisting system, gate and accessories including all labours, tools and other equipment as per direction of E/I.(For Lakhanpahari disty. H/R Gate) |
| 36 | Providing fabricating, fitting & fixing of Embedding Component of H/R gate i.e. side track of ISMC 100, bottom seal base beam of ISMB 200, side seal seat 8mm thick & 40mm wide Stainless Steel Rectangular Flat Bar& bottom seal seat are 8mm thick & 80mm wide S.S. flat bar,Side Rubber Seal path 8mm thick and 80mm wide stainless steel Flat bar(Up stream),anchoring the side track by angle ISA100x100x8mm & anchor bolt 16mm dia MS rod, Side rubber seal path-8 mm thick & 80 mm wide Stainless steel plate including the cost of materials, labours, welding, transportation & erection, painting with approved shade of paints as per design, drawing, specification and direction of E/I. .(For Lakhanpahari disty. H/R Gate) |
| 37 | Providing fabricating, fitting & fixing of H/R gate of size 1100mm(W)x1140mm(H), skin plate of 10mm thick M.S. plate, top & bottom girder ISMC75, horizontal girder ISMC 75, end vertical girder ISMC 75, vertical stiffner ISMC 75 ,side & bottom seal seat-6mm thick & 60mm wide S.S. flat bar,Clamp plate for rubber Seal 6mm thick 60mm wide,Side rubber seal fitting angle ISA 65mmx65mmx6mm,Bottom rubber seal fitting angle ISA 65mmx65mmx6mm, Rubber seal [Musical knot Rubber (125L x 44D x 12T) & flat rubber (75L x 12T)] including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I. (For Lakhanpahari disty. H/R Gate) |
| 38 | Providing fabricating, fitting & fixing of Hoist beam of H/R gate i.e ,main, cross & platform beam of ISMB200, anchor bolt of 16mm dia M.S. rod, including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I. (For Lakhanpahari disty. H/R Gate) |
| 39 | Providing fabricating, supplying, fitting & fixing of Hoisting arrangement of carbon steel spindle of 63mm dia. and hoist nut of phosphor bronze metal, wheel handle of M.S. rod outer dia 700mm, top cover plate ,bottom plate, key, nut and bolt etc. including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints as per design, drawing, specification and direction of E/I. Dia. of spindle= 63mm, length of spindle= 2.5M (For Lakhanpahari disty. H/R Gate) |
| 40 | Dismantling R.C.C. work/B.M. work including stacking serviceable materials in countable stack with 15 M, lead & disposed of unserviceable materials with all leads all complete as per direction of E/I. (For Lakhanpahari disty. H/R Gate) |
| 41 | Providing and laying PCC or RCC( M200) with nominal mix of ( 1:1.5:3) various component of dam superstructure with approved quantity of 40 mm graded coarse aggregate of sand of requisite FM (2.5 to 3.0) washed and screened excluded cost of shuttering or form work as well as reinforcement, its cutting , bending , binding and placing but including necessary tools and plant and vibrating, curing, royality all taxes etc. All complete job as per specification and direction of E/I.SOR-2022,RCD,Pg. No.-477, Case 2 (For Lakhanpahari disty. H/R Gate) |
| 42 | Labour charge for complete cleaning, washing of gates, vents & worksite for removing sand, soil, stone and other obstacles for easy working and smooth operation including all labours and materials as per specification & direction of E/I.(For Birseni disty. H/R Gate) |
| 43 | Providing extract the old damage & unserviceable hoisting system, gate and accessories including all labours, tools and other equipment as per direction of E/I.(For Birseni disty. H/R Gate) |
| 44 | Providing fabricating, fitting & fixing of Embedding Component of H/R gate i.e. side track of 10 mm thick M.S. plate in form of built up section, bottom seal base beam of ISMB 250, side seal seat (Down stream) & bottom seal seat both are 8mm thick & 80mm wide S.S. flat bar,Side Rubber Seal path 8mm thick and 80mm wide stainless steel Flat bar(Up stream), anchoring the side track by angle ISA100x100x8mm & anchor bolt 16mm dia MS rod,Side rubber seal path-8 mm thick & 80 mm wideStainless steel plate (304L) including the cost of materials, labours,welding, transportation & erection, painting with approved shade of paints as per design, drawing, specification and direction of E/I. (For Birseni disty. H/R Gate) |
| 45 | Providing fabricating, fitting & fixing of H/R gate of size 2230mm(W )x 933mm(H), skin plate of 10mm thick M.S. plate, top & bottom girder ISMC150, horizontal girder ISMB150, end vertical girder ISMB150, vertical stiffner 10mm thick & 150mm wide M.S. plate ,side & bottom seal seat-6mm thick & 70mm wide S.S. flat bar,Clamp plate for rubber Seal 6mm thick 60mm wide,Side rubber seal fitting angle ISA 65mmx65mmx6mm ,Bottom rubber seal fitting angle ISA 65mmx65mmx6mm Rubber seal [Musical knot Rubber (125L x 44D x 12T) & flat rubber (75L x 12T)] including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I. (For Birseni disty. H/R Gate) |
| 46 | Providing fabricating, fitting & fixing of Hoist beam of H/R gate i.e ,main, cross & platform beam of ISMB200, anchor bolt of 16mm dia M.S. rod,Chequered plate 5 mm thick, Railing post: - ISA 75X75X10, Railing: – ISA 65X65X8 including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I. (For Birseni disty. H/R Gate) |
| 47 | Hoisting arrangement with Worm gear arrangement, Worm gear box with IEC flange and extended input shaft “Box 85”, M.S. Rod 75mm dia. Spindle length 2.5 M (thread-2 tpi, depth of thread- 6mm) 8M GI pipe with coupling, including cost of all materials & labours, welding and accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting with approved shade of paints as per design, drawing, specifications & direction of E/I. (For Birseni disty. H/R Gate) |
| 48 | Dismantling R.C.C. work/B.M. work including stacking serviceable materials in countable stack with 15 M, lead & disposed of unserviceable materials with all leads all complete as per direction of E/I. (For Birseni disty. H/R Gate) |
| 49 | Providing and laying PCC or RCC( M200) with nominal mix of ( 1:1.5:3) various component of dam superstructure with approved quantity of 40 mm graded coarse aggregate of sand of requisite FM (2.5 to 3.0) washed and screened excluded cost of shuttering or form work as well as reinforcement, its cutting , bending , binding and placing but including necessary tools and plant and vibrating, curing, royality all taxes etc. All complete job as per specification and direction of E/I.SOR-2022,RCD,Pg. No.-477, Case 2 (For Birseni disty. H/R Gate) |
| 50 | Labour charge for complete cleaning, washing of gates, vents & worksite for removing sand, soil, stone and other obstacles for easy working and smooth operation including all labours and materials as per specification & direction of E/I. (For Kashiyatari Disty. H/R Gate)- |
| 51 | Providing extract the old damage & unserviceable hoisting system, gate and accessories including all labours, tools and other equipment as per direction of E/I.(For Kashiyatari Disty. H/R Gate)- |
| 52 | Providing fabricating, fitting & fixing of Embedding Component of H/R gate i.e. side track of 10 mm thick M.S. plate in form of built up section, bottom seal base beam of ISMB 250, side seal seat(Down stream) & bottom seal seat both are 8mm thick & 80mm wide S.S. flat bar,Side Rubber Seal path 8mm thick and 80mm wide stainless steel Flat bar(Up stream),anchoring the side track by angle ISA100x100x8mm & anchor bolt 16mm dia MS rod,Side rubber seal path-8 mm thick & 80 mm wideStainless steel plate (304L) including the cost of materials, labours, welding, transportation & erection, painting with approved shade of paints as per design, drawing, specification and direction of E/I. .(For Kashiyatari Disty. H/R Gate)- |
| 53 | Providing fabricating, fitting & fixing of H/R gate of size 1900mm(W )x 1200mm(H), skin plate of 10mm thick M.S. plate, top & bottom girder ISMC150, horizontal girder ISMB150, end vertical girder ISMB150, vertical stiffner 10 mm thick & 150 mm wide M.S. plate ,side & bottom seal seat-6mm thick & 60mm wide S.S. flat bar,Clamp plate for rubber Seal 6mm thick 60mm wide,Side rubber seal fitting angle ISA 65mmx65mmx 6mm,Bottom rubber seal fitting angle ISA 65mmx65mmx6mm , Rubber seal [Musical knot Rubber (125L x 44D x 12T) & flat rubber (75L x 12T)] including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I.(For Kashiyatari Disty. H/R Gate)- |
| 54 | Providing fabricating, fitting & fixing of Hoist beam of H/R gate i.e ,main, cross & platform beam of ISMB200, anchor bolt of 16mm dia M.S. rod,Chequered plate 5 mm thick, Railing post: - ISA 75X75X10, Railing: – ISA 65X65X8 including cost of materials, labours, welding, transportation & erection, painting with approved shade of paints, as per design, drawing, specification and direction of E/I. (For Kashiyatari Disty. H/R Gate)- |
| 55 | Hoisting arrangement with Worm gear arrangement, Worm gear box with IEC flange and extended input shaft “Box 85”, M.S. Rod 75mm dia. Spindle length 2.5 M (thread-2 tpi, depth of thread- 6mm) with coupling, including cost of all materials & labours, welding and accessories, transportation & erection, energy charge, incidental charge, overhead charge & painting with approved shade of paints as per design, drawing, specifications & direction of E/I. (For Kashiyatari Disty. H/R Gate)- |
| 56 | Dismantling R.C.C. work/B.M. work including stacking serviceable materials in countable stack with 15 M, lead & disposed of unserviceable materials with all leads all complete as per direction of E/I. (For Kashiyatari Disty. H/R Gate)- |
| 57 | Providing and laying PCC or RCC( M200) with nominal mix of ( 1:1.5:3) various component of dam superstructure with approved quantity of 40 mm graded coarse aggregate of sand of requisite FM (2.5 to 3.0) washed and screened excluded cost of shuttering or form work as well as reinforcement, its cutting , bending , binding and placing but including necessary tools and plant and vibrating, curing, royality all taxes etc. All complete job as per specification and direction of E/I.SOR-2022,RCD,Pg. No.-477, Case 2 (For Kashiyatari Disty. H/R Gate)- |
| 58 | Repair and maintenance cum security of 02 Nos. H/R gate and 04 Nos. Under sluice gates (Weir gates) at Head work site of Harna (North) Weir for 3 years, all complete job of head works gate as per direction and specification of E/I. (For 2 No. H/R Gate, 4 Nos. U/S Gate Harna(North)Head work)- |
| 59 | GST @ 18 % |
| 60 | Labour Cess @ 1% Please Enable Macros to View BoQ information |
