|
| 1 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat DSR 13.82.1 |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work DSR 13.99.1 |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 13.80 |
| 4 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 13.91 |
| 5 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) DSR 14.5.2 |
| 6 | French spirit polishing : Two or more coats on new works including a coat of wood filler DSR 13.68.1 |
| 7 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) DSR 15.2.1 |
| 8 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) DSR 15.2.2 |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.10 |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 4.1.2 |
| 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.2 |
| 12 | Providing and fixing 1.5 mm thick polycarbonate sheet to be fixed on the existing MS frame with self drilling machine screws complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 13 | Providing and Fixing chicken mesh on RCC beams, facias etc. wherever required with wooden gutties, nails and screws including drilling holes etc complete as per directions of the Engineer-in-charge. |
| 14 | Dashing Cement concrete 1:1½ :3 in R.C.C. beams, stairs, slabs, facias etc of average thickness 1” excluding steel reinforcement, centering and shuttering but including curing of the concrete complete in all respects and to the entire satisfaction of the Engineer in charge |
| 15 | Pre-wetting the surface adequately and allowing to saturated surface dry conditions and applying coating of acrylic polymer based Acrocrete or equivalent make mixed with cement slurry @ 2 Kg. per bag of cement for proper bonding of old and new surface complete in position as per directions and to the entire satisfaction of Engineer-in-charge. |
| 16 | Removing rust from reinforcement bars by applying Liquid Rust Remover of Pidilite or equivalent make and cleaning the bars by scrubbing with wire brushes and washing with water and further repeating the process for heavily rusted bars till the rust free surface is achieved as per Manufacturers Specifications complete in all respects and to the entire satisfaction of the Engineer in charge. |
| 17 | 12 mm cement plaster of mix: 1:4(1 cement: 4 fine sand) DSR 13.1.1 |
| 18 | Providing gola 75x75 mm in cement concrete 1:2:4(1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase DSR 12.21.1 |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood DSR 9.1.1 |
| 20 | Reconditioning of single seater sofa chair including removal of old foam, rexin, cushion and other damaged material including the cost of new rexin uphoistrey of any colour as required, use of marking, adhesive, reel, black nail & melamine polish on exposed wood surface and other allied material to the entire satisfaction of Engineer in charge. The foam to be used for the repair work of the sofa shall be of make jindal foam, Feather fresh foam or Feather foam. The work is required to be eecuted as per the existing sofa chair provided in the Hon'ble High Court.(N.S) |
| 21 | Reconditioning of three seater sofa chair including removal of old foam, rexin, cushion and other damaged material including the cost of new rexin uphoistrey of any colour as required, use of marking, adhesive, reel, black nail & melamine polish on exposed wood surface and other allied material to the entire satisfaction of Engineer in charge. The foam to be used for the repair work of the sofa shall be of make jindal foam, Feather fresh foam of feather foam. The work is required to be eecuted as per the existing sofa chair provided in the Hon'ble High Court.(N.S) |
| 22 | Chipping loose concrete average 1” thickness of Facias – RCC beams- chajjas Stairs, Slabs, Columns - etc. removal of loose mortar and cleaning the surface thoroughly to remove dust particles complete in all respects and to the entire satisfaction of the Engineer in charge. Please Enable Macros to View BoQ information |
