|
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required DSR 17.3 |
| 2 | W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1 |
| 3 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : DSR 17..7 |
| 4 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 5 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 6 | Kitchen sink without drain board |
| 7 | 610x460 mm bowl depth 200 mm DSR 17.10.2.2 |
| 8 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A |
| 9 | Providing &fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 32mm DSR 17.28.1.1 |
| 10 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 11 | 75 mm dia DSR 17.35.2 |
| 12 | Centrifugal cast iron S&S pipe as per IS: 3989 DSR 17.35.2.2 |
| 13 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 14 | 100 mm inlet and 75 mm outlet |
| 15 | Sand Cast Iron S&S as per IS- 3989 DSR 17.60.2.1 |
| 16 | Providing &fixing G.I.pipes complete with G.I. fittings , clamps, i/c cutting and making good the walls etc. DSR 18.10 |
| 17 | 15 mm dia nominal bore DSR 18.10.1 |
| 18 | 20 mm dia nominal bore DSR 18.10.2 |
| 19 | Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 20 | 45 cm length DSR 18.21.2 |
| 21 | 15 mm nominal bore DSR 18.21.2.1 |
| 22 | Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 |
| 23 | 20 mm nominal bore DSR 18.46.2 |
| 24 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :DSR 18.49 |
| 25 | 15 mm nominal bore DSR 18.49.1 |
| 26 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms DSR 18.51. |
| 27 | 15 mm nominal bore DSR 18.51.1 |
| 28 | Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to DSR18.52 |
| 29 | 15 mm nominal bore. DSR 18.52.1 |
| 30 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming DSR 18.53 |
| 31 | 15mm nominal bore DSR 18.53.1 |
| 32 | Providing and fixing of Extension nippple upto 1-1/2\\" length DSR 18.53A |
| 33 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76.1 |
| 34 | with common burnt clay F.P.S. (non modular) bricks |
| 35 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc DSR 18.78 |
| 36 | Providing and fixing of C.P.Steel Grating Heavy (With hole without hole) size 4\\" i/d with 114gram wt. of approved make |
| 37 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 38 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 39 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 40 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 41 | Providing & fixing of C.PCup heavy duty of approved make |
| 42 | Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Studs complete all respect of approved make |
| 43 | Providing and fixing GI Tank Nipple 20 mm dia complete. |
| 44 | Providing drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 45 | Providing& Fixing CP Nozzel Tap any approved make complete in all respect |
| 46 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 47 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 48 | Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. Please Enable Macros to View BoQ information |
