|
| 1 | Dismantling framed timber scantlings 40 sq. cm & over in section, in any position all as speciied and directed. |
| 2 | S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates GDE Fe410-0 or Fe 310-O all as speciied and directed. |
| 3 | M&L for two coat of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces over 10 cm width or girth including preparation of new surfaces. |
| 4 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roofcoverings complete all as specified and as directed. |
| 5 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 7 | Material & Labour non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm in floors or skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match laid over 15mm thick screed bed for laying floor finishes in CM (1:4) complete all as specified |
| 8 | Material & Labour glazed ceramic coloured tiles 350 x 250 x 7 /450 x300x7 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over 10mm thick bedding layer of mortar to wall in CM(1:4) for laying tiles on skirting/dadocomplete all as specified and as directed. |
| 9 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 10 | M&L for providing 100 mm thick cement concrete type C-2, 1:3:6 using (40 mm graded stone aggregate) as in path or paveway finished rough without using extra cement complete all as specified . |
| 11 | M& L Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors and cut and polished with grey cement and pigments over 15 mm thick screed bed or bedding layer of mortar in CM 1:4 for laying finishes all as specefied. |
| 12 | M&L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc.of Cross section exc 25 Sqcm and n exc 50 Sqcm complete all as specified . |
| 13 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished fair and even w/o using extra cement and making groove of 10mm width at every 3m intervals and at diagonals and filling the joints with bitumen mastic( a mix of bitumen and sand in 1:1 by weight) complete all as specified . |
| 14 | Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) |
| 15 | S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 16 | S&F factory made Z section steel window/ ventilator with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete without glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed. |
| 17 | S&F factory made Z section steel ventilator with top hung shutter incl hinges, steel peg stay, with glazing bars including a shop coat Red Oxide priming including taking out old one , complete all as specified and directed. |
| 18 | S&F of Powder coated (minimum 50 micron thick) aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass with stainless steel mosquito proof gauge 0.36 mm nominal dia of wire and average width of aperture 1.40 mm making good disturbed surface of wall complete all as specified and as directed. (Note: Window opening size to be measured.) |
| 19 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 20 | S&F 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each complete all as specified. |
| 21 | S&F figured glass, pin head type 4 mm thick in squares n.exc 0.50 Sqm in each pane etc complete all as specified. |
| 22 | M&L mild steel work such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165 complete all as specified and as directed. |
| 23 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth including preparation of new surface & applying one coat of red oxide primer complete all as specified . |
| 24 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 25 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles) with particle board core, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified . |
| 26 | S&F Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized of100mm size type B-21.. |
| 27 | S&F 125mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed. |
| 28 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 29 | Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed. |
| 30 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified. |
| 31 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified. |
| 32 | M&L Plain cement concrete in bed block and filling of door frame type C-1 1:3:6 (20 mm graded stone aggregate) complete all as specified . |
| 33 | Taking down shutter from the frame exe 1.00 Sqm and n exc 2.0 Sqm each complete all as specified and directed. |
| 34 | S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 35 | S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified and directed. |
| 36 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed |
| 37 | Supply & Fix 18/19 mm thick exterior grade prelaminated particle board (prelaminated on one side) with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work for Cupboard partition complete all as specified. |
| 38 | Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails |
| 39 | M&L 2nd class hardwood plain fillets square, rectangular or triangular in sectional area exc 13 Sqcm & n. exc 25 Sqcm clean swan secured with nails complete all as specified and as directed. |
| 40 | Supply & Fix 100 mm aluminium anodised Hasp and staple, safety type,including bolt to hinge plate fixed with screws |
| 41 | M&L for two coats of synthetic enamel paint over one coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete as specified and directed. |
| 42 | S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 43 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 44 | S&F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 45 | S&F of 150 mm long anodised barrel tower bolt of extruded section and as directed. |
| 46 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 47 | M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed |
| 48 | M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4 complete all as specified and as directed |
| 49 | Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed. |
| 50 | M & L 10mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:4 to be finished fair and even with out suing extra cement. |
| 51 | M&L for external rendering 15 mm thick in CM 1:4 mixed with WPC @0.20Ltr/ bag by weight of cement on brick work or concrete surfaces of wall finished even and smooth complete all as specified .Note-WPC shall be measured and paid seperately. |
| 52 | M & L for 5 mm thick rendering in CM (1:3) on fair face of concrete surfaces as in ceiling,chajjas etc finished even and smooth without using extra cement complete as specified . |
| 53 | Supply only Liquid water proofing compound |
| 54 | M & L two coat of Oil bound distemper over a coat of pimer on 2mm thick Wall care putty on wall Surface incl preparation of surface complete all as specified and as directed |
| 55 | M& L for two coat of cement base paint on new plastered surface over a coat of primer including preparation of surface complete all as specified and as directed |
| 56 | Supply & Fix in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete all as specified and as directed. |
| 57 | S&F in repairs to Vitreous China wash down water closet pan (pedestal pattern, excluding fixing bolts, flushing cistern and flush pipe)white incl with seat cover complete taking down old seat fixing bolt flush pipe complete all as specified and directed. |
| 58 | S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes complete all as specified |
| 59 | S&F in repairs vitreous china wash basin, white, flat back, size 450x300m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified . |
| 60 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed . |
| 61 | S&F in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified |
| 62 | S&Fin repair for 600X450mm long bevelled edge mirror of selected quality glass mounted on 6mm thick AC building borad or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers with sheet glass shelf assembly consisting of 5.50 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long all as specified . |
| 63 | S&F in repair 15 mm stop valves (angular type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed . |
| 64 | S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs complete all as specified and as directed. |
| 65 | S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and as directed. |
| 66 | S&F 15mm bore brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed. |
| 67 | Supply and fix in repairs of size 125 mm brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified |
| 68 | S & F Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as specified and as directed. |
| 69 | S& F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified . |
| 70 | S&F 50mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or innfloors etc complete all as specified . |
| 71 | Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed |
| 72 | Taking up or down, steel tubing 15mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed |
| 73 | Supply and fix 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified . |
| 74 | Supply and fix 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified . |
| 75 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wallcomplete all as specified and as directed |
| 76 | Taking down PVC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and as directed. |
| 77 | Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and as directed |
| 78 | Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and as directed |
| 79 | Supply and fix 75 mm bore PVC (SWR) bends in any types with acess door complete all as specified and as directed.. |
| 80 | Supply and fix 110 mm bore PVC (SWR) bends in any types with acess door complete all as specified and as directed.. |
| 81 | S&F 110mm dia PVC (SWR) branch piece single (singleT) equal or unequal with acess door complete all as specified and as directed. |
| 82 | Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed |
| 83 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside for schedule of credit to contactor including making good of the disturbed surfaces, all as specified and directed. |
| 84 | Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty) double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan/call bell point controlled by one way switch complete all as specified and as directed. Note for item Nos.2 to 5: (i) Cost of cutting of wall, if any, for housing of metal box and also making good the disturbed surfaces are deemed to be included in unit rate (ii) Wire should be used in proper colour code red/yellow/blue for phase, black for neutral & green for earth. |
| 85 | All as per Item No 84 above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed. |
| 86 | All as per Item No 84 above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed. |
| 87 | All as per Item No 84 above but with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase,neutral & earth for One 3/5pin 16 Amp Socket outlet on the independent board complete all as specified and as directed. |
| 88 | Supply and fix switch piano flush button 6 Amp single pole, one way complete all as specified and as directed. |
| 89 | Supply and fix socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed. |
| 90 | Supply and fix Switch socket combination 5 Pin, 6 Amp flush type complete all as specified and as directed. |
| 91 | Supply and fix switch socket combination 5 Pin 6/16 Amp flush type with complete all as specified and as directed. |
| 92 | Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals all as directed. |
| 93 | Supply and fix electronic fan regulator stepped (5 step) rotary socket type flush type AC 240 volt complete all as specified and as directed.. |
| 94 | Material and labour for sub main wiring with two single core PVC insulated cable with Copper conducter unsheathed cable (FRLS) of size 4.0 sqmm drawn through & including PVC conduit with 4.0 sqmm PVC insulated copper wire single core for continuous earthing after taking out old unservicable submain wiring complete all as directed. |
| 95 | Supply and fix in replacement powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (Double door)4 way with 200 amps rated busbar DIN channel, neutral link & earth link superline all as specified as directed.(Chase cutting & make good disturb surface is included in unit rate). |
| 96 | All as per item No 95 here in above but for 8 way SPN DB. |
| 97 | All as per item No 95 here in above but for 12 way SPN DB. |
| 98 | Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed. |
| 99 | Supply and fix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete inculding taking down the old unserviceable one all as specified as directed. |
| 100 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver and integrated tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Including taking down old unserceable light fitting complete all as specified and as directed. |
| 101 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete including taking down old unserceable light fitting all as specified and directed. |
| 102 | Supply and fix LED light fitting, 1x10/12w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size, including taking down the old unserviceable fitting complete all as specified and directed. |
| 103 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details. Please Enable Macros to View BoQ information |
