|
| 1 | Preparation of old surface including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white washing on old plastered or un-plastered surface of walls, complete all as specified and as directed. |
| 2 | All as per serial item No.1 above but applying two coat of oil bond distempering with emulsion on ceiling, complete all as specified and as directed. |
| 3 | All as per serial item No.1 above but applying two coat of colour washing on walls, complete all as specified and as directed. |
| 4 | All as per serial item No.1 above but applying two coat of cement base paint on wall surface, complete all as specified and as directed. |
| 5 | M&L for Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coat of synthetic enamel paint, complete all as specified and as directed. |
| 6 | M&L for Preparation of old painted zinc or galvanised surface of any description and in position and applying two coat of synthetic enamel paint all as specified. Note :-(a) The surface of corrugated steel sheeting shall be measured flat (not girth) without any extra allowance for laps and the area obtain shall be increased by 14%).(b) The surface of plain steel sheeting as in ridge, hips, velley gutters, flashings etc, shall be measured flat alongwith girth (length and firth as fixed) and the area obtained shall be added to the area of corrugated steel sheeting, complete all as specified and as directed. |
| 7 | Dismantling plain or corrugated steel sheeting, any gauge , thickness, including Nainital or similar pattern roof covering etc, complete all as specified and as directed. |
| 8 | S&F 0.63 mm thick Galvanised , corrugated mild steel shetting with two corrugations side lap, fixed with coach screws, washers, and L- type or J- type or cranked hook bolts in lie of screw in roofs , walls etc. with grade of zinc coating 275 etc, complete all as specified and as directed. |
| 9 | Refixing for Galvanised, corrugated mild steel sheeting with two corrugations side lap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed. |
| 10 | M&L for 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed. |
| 11 | M&L for painting steel newly untreated Surfaces two coat of synthetic enamel paint over one coat of red oxide zinc chrome of any description, not otherwise descri-bed,over 10cm width or girth, complete all as specified and as directed. |
| 12 | Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed. |
| 13 | M&L for Rendering 10 mm thick in patches in cement mortar 1:4 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement, complete all as specified and as directed. |
| 14 | Rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound, complete all as specified and as directed. |
| 15 | Rendering 5mm thick in patches in cement mortar in 1:3 on ceiling, complete all as specified and as directed. |
| 16 | M & L for preparation of undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of chalk whitening on ceiling etc, complete all as specified and as directed. |
| 17 | M & L for preparation of undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of chalk whitening on wall etc, complete all as specified and as directed. |
| 18 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. |
| 19 | S&F 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified and as directed. |
| 20 | All as per Srl No 19 here-in-before but except boarding, complete all as specified and as directed. |
| 21 | Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed. |
| 22 | M & L 2nd Class soft wood as in scantling, clean swan timber framed and fixed, complete all as specified and as directed. |
| 23 | All as per above Srl No.22 here-in-before but except timber, complete all as specified and as directed. |
| 24 | Hacking out old broken glass ( any thickness, size, quality or description) from wooden frames or stone or concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 25 | S&F sheet glass ordinary quality in square n. exc 0.5 sqm each pane 4 mm thick, complete all as specified and as directed. |
| 26 | S&F sheet glass ordinary quality in square exc 0.5 sqm each pane 4 mm thick, complete all as specified and as directed. |
| 27 | Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 28 | M&L Hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 29 | M&L for Cement concrete type D- 2, 1:4:8 100mm thick(40mm graded aggregate) as use in sub base, complete all as specified and as directed. |
| 30 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cm1:4, complete all as specified and as directed. |
| 31 | M&L for Virified Ceramic Dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 32 | Note:- Schedule of credit Rs 80,370.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
