|
| 1 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC, complete all as specified and directed. |
| 2 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each, including taking out hold fast embedded in PCC, complete all as specified and directed. |
| 3 | S&F floor door stopper of overall length of cover plate 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 4 | S&F in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified. |
| 5 | S&F Windows, Ventilators fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/ Sqr. Mtr.) with total coated thickness of 0.60 mmPaint specifications: -Coated Sections should be coated with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick.Dimensions of Sections: -Sections for Frame should be of 72mm X 50mm, Section for Mullion should be of 72mmX50mm, Section for Shutter Frame should be of 47mm X 20mm, Section for Fixed Glass Bead should be of 12mmX12mm, and Section for Fly mesh should be of 40mm X 20mm.Fixing Details:-Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined to the Frame/ Mullion using Nylon cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon profile should be used around Fly mesh to fix Mesh in Mesh Shutter. |
| 6 | Accessories:-Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay.Window frame should be fix to brick/concrete masonary by using Nylon-self expanding caps & driving MS electroplated 80mm long screws into the caps through frame.Glass:- Glass shutter & fixed glass portions should be provieded with a glass of 5mm plain float glass.Mesh:- Mesh shutter should be provided with a stainless steel 32 Gauge fly mesh of 304 grades with 144 holes per square inch.Grill:- Window should be provided with grill made of 10 mm Sq MS bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 7 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 8 | M&L for preparation of old painted steel surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 9 | Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed. |
| 10 | M&L for brick work in cement mortar 1:6 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed. |
| 11 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed. |
| 12 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 litres incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site complete all as specified and directed. |
| 13 | Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 14 | M&L for Rendering 15mm thick in cement mortar 1:4 using liquid water proofing compound on fair faces of brick work or concrete surfaces finishing the surfaces even & smooth without using extra cement including scaffolding upto 7 meter height and curing the surface, complete all as specified and directed.Note: WPC shall be measured and paid separately under respective item. |
| 15 | M&L for Rendering 10mm thick in cement mortar 1:6 other than on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including scaffolding at any height and curing the surface, complete all as specified and directed. |
| 16 | M&L for Rendering 10mm thick in cement mortar 1:3 using liquid water proofing compound on brick work or concrete surfaces finishing the surfaces of wall/ floor in sunken portion, surfaces finished even and smooth without using extra cement including scaffolding at any height and curing the surface, complete all as specified and directed.Note: WPC shall be measured and paid separately under respective item. |
| 17 | M&L for Rendering 5mm thick in cement mortar 1:3 on concrete surfaces ceiling/ top and sides of chajjas/ facia of roof projection including necessary formwork upto 7 meter including height finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for Chicken wire mesh fixed in postion with necessary arrangements on roof projections, chajjas, facia and similar items upto 8m height, complete all as specified and directed. |
| 19 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 20 | Complete removal of existing treatment internal /external on wall/Ceiling/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 21 | M & L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall/Ceiling and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:-Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations.Step 3 :- Allow 6-8 hrs time to dry the putty surface |
| 22 | M&L for applying two coats of oil bound distemper over a coat of primer on walls using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 23 | M&L for two coat water based Premium Acrylic Smooth Exterior Emulsion of approved colour with silicon additive & color stay technology, excellent dirt pick up resistance with low voc less than 50 gram/ litre as per the leeds specifications, anti algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a slow speed of min 1 ltr per minute having a pressure of 3300 psi. allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. |
| 24 | M&L for preparation of old concrete surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 25 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise sepecifically provided for complete all as specified and directed. |
| 26 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise sepecifically provided as slab, RCC Water Tank, cover etc. for complete all as specified and directed. |
| 27 | M&L for PCC 1:5:10, type E-2 using 40mm graded crushed brick aggregates, as in sunken floors and mass concrete including breaking and removal of existing filling of lime concrete/ PCC/ brick bats and rubbish out off the premises, etc complete all as specified and directed. |
| 28 | M&L for 75mm thick PCC, type C-1, 1:3:6, (using 20mm graded crushed stone aggregate) as in plinth protection and similar works uncluding finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 29 | S & F for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 30 | M&L Glazed ceramic coloured tiles of size 600 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. |
| 31 | M&L for Non skid ceramic joint free colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. |
| 32 | M&L for Non skid ceramic joint free colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/ dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick screed bed in cement mortar 1:4 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. |
| 33 | Dismantling of old brick tiles or terracing tiles, single layer on roofs complete all as specified and directed. |
| 34 | M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in roof padding including the top surface even & smooth without using extra cement, complete all as specified and directed. |
| 35 | M&L for liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster) |
| 36 | M&L for 40 mm thick brick tiles laid on 15mm thick screed bed in cement mortar 1:6 and joints grouted flush in cement mortar (1:3) even and levelled, complete all as specified and directed. |
| 37 | All as per item No. 35 here in before but except brick tiles laid on cement mortar 15mm thick in CM 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed. |
| 38 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed. |
| 39 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed. |
| 40 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 32x62mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length, complete all as specified and directed. |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 42 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 19mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 500 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on one face of shutter including dismantling of old boarding complete all as specified and directed by Engineer-in-Charge. |
| 43 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type wire mesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-in-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 44 | Supply only 100mm long butt hinges medium weight ISI marked stainless steel complete all as specified and directed. |
| 45 | S&F for 250 mm long stainless steel sliding door bolts, plate type, stove enamelled black, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section, complete all as specified and directed. |
| 46 | S&F 150mm long stainless steel barrel tower bolts, stove enamelled black with bright boltand fixed, ISI marked, complete all as specified and directed. |
| 47 | S&F 150mm stainless steel pressed handles, oval type, stove enamelled black ISI marked, complete all as specified and directed. |
| 48 | S&F in repair 20mm ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified. |
| 49 | Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe, complete all as specified and directed. |
| 50 | Taking up or down GI pipe 20mm bore and connections, including cleaning for refixing or removal unserviceable pipe, complete all as specified and directed. |
| 51 | S & F Unplasticized Polyvinyl Chloride (UPVC) tubing of size 20 mm bore, medium grade, pressure rating 10 Kgf/Sqcm , Unplasticized materials with all Fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces complete all as per IS 13593-1992, fixed to wall and ceiling or laid in floors and making good disturbed surfaces to match the existing surfaces complete all as specified and as directed by Engr-in-Charge. |
| 52 | S & F Unplasticized Polyvinyl Chloride (UPVC) tubing of size 25 mm bore, medium grade, pressure rating 10 Kgf/Sqcm , Unplasticized materials with all Fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces complete all as per IS 13593-1992, fixed to wall and ceiling or laid in floors and making good disturbed surfaces to match the existing surfaces complete all as specified and as directed by Engr-in-Charge. |
| 53 | S&F Vitreous China wash down water closet pan (Pedestal pattern) including P or S trap, fixing bolts & connecting to drain pipe including plastic seat cover with flat bottom cover and mild steel chromium plated hinging device and connection to flush pipe, anti symphonic pipe complete, all as specified and directed. |
| 54 | S&F in repair 10 litres PVC low level flushing cistern (white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed. |
| 55 | S&F in repair vitreous china wash hand basin (flat back or angle back type) coloured of bowl size 550mmx400mm including 32mm waste coupling and waste pipe PVC 32mm dia to be fixed iron brackets complete all as specified and directed. |
| 56 | S&F CP Brass Centre Hole, wash basin mixture tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore complete all as specified and directed. |
| 57 | S&F in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed. |
| 58 | S&F in repair stop/angle valve 15 mm dia cast copper alloy screwed on high pressure with crutch or butterfly handle screwed bolts ends, for iron pipe or for union and fixed complete all as specified and directed. |
| 59 | S&F in repair stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed. |
| 60 | S&F in repair 20 mm dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge. |
| 61 | S&F grating square 150mm size with waste hole of PTMT (minimum weight 100gms), complete all as specified and directed. |
| 62 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 63 | S&F stainless steel towel rail 20mm dia D type 60cm long between flanges, including bracket and fixed to walls, complete all as specified and directed. |
| 64 | S&F in repair stainless steel, Soap Dish fixed with approximate size 160x 160x 90mm complete all as specified and directed. |
| 65 | S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 66 | S&F Waste pipe of low or high density or PVC. 32 mm dia for Kitchen Sink & Wash basin complete all as specified and directed. |
| 67 | S&F 20 mm bore stainless steel curtain rod with 1 mm thick wall thickness and including a pair of brackets and knobs with each length/ piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed. |
| 68 | S&F of 75mm bore, PVC (SWR) drainage pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 69 | S&F of 110mm bore, PVC (SWR) drainage pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 70 | S & F for PVC (SWR) bend, plain including jointing with solvent cement 75 mm bore in repairs complete all as specified. |
| 71 | S & F for PVC (SWR) bend, plain including jointing with solvent cement 110 mm bore in repairs complete all as specified. |
| 72 | S & F in repair for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified. |
| 73 | S&F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal for PVC (SWR) pipes as in repair complete all as specified and directed. |
| 74 | S&F for 110mm bore PVC (SWR) vent cowl as in repair complete all as specified and directed. |
| 75 | Cutting holes in brick walls built in cement mortar or cement lime mortar and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required for exc half brick but n exc one brick thick wall complete all as specified and directed.Note : (i) Rates are deems to be included to making the cutting hole smoothly and colour wash as per existing colour.(ii) Rates are deems to be including charges of hiring T & P, i.e. ladder square folding and insurance of labour deployed, being holes are made to be at mutlistorage bldgs of different height . |
| 76 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 77 | M&L for Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs, shelves and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specified and directed. |
| 78 | S&F PTMT Bath Cabinet of size not less than 300mmx450mmx75mm deep with standard size of glass complete all as specified and directed. |
| 79 | M&L for machine cut Kota stone, stone slab flooring 18-20mm thick over screed bed 20mm thick in cement mortar 1:4 set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and granite polishing, complete all as specified and directed. |
| 80 | M&L for kota stone slab 18 to 20mm thick in riser, steps, skirting, dado and pillar laid over 10mm thick cement screed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, rounding to edges of stone slabs one edge, such as in steps and landing complete all as specified and directed. |
| 81 | M & L For 16mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. |
| 82 | Providing edge moulding to 16mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 83 | M&L for type B 0 1:2:4 , 12.5 mm graded aggregate Cement concrete for Copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 84 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 85 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes pipe and waste coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 86 | S&F in repair Stainless steel plate rack of size (750mm x 600mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with screw of required size including necessary fittings/nuts, bolts & washers complete all as specified and directed. |
| 87 | M&L for 2 Coats of Dr fixit sureseal on brick /concrete surface as per the following procedure :-(a) Raking to brick joints followed by washing to joints(b) Applying one coat of Dr Fixit Sureseal with brush application and letting the coat dry for 4 hrs(c ) Plastering to brick surface (To be measured seperately)(d) One coat water proof putty followed by one coat of sureseal |
| 88 | S & F of Rolled mild steel Framed work Fe 410-W (GdeE- 250) quality A in Stairs and tank platform including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, flats etc. complete |
| 89 | S & F continuous piano hinges (30mm width of flaps when open) mild steel, bright finish complete all as specified and directed |
| 90 | S&F 100mm Hasp and staple, safety type, aluminum anodised including bolt to hinge plate and fixed with screws complete |
| 91 | S&F magnetic door catches with sticking plate of standard size for cupboard/cabinet doors aprooved by GE as specified and directed. |
| 92 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 93 | Taking down existing unserviceable submain wiring of any size and making good the disturbed surface complete all as specified and directed. |
| 94 | Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed. |
| 95 | Taking down electric water heater complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and keeping in safe custody for fixing under relevant schedule item complete all as specified and directed. Please Enable Macros to View BoQ information |
| 96 | Taking down electric water heater complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and keeping in safe custody for fixing under relevant schedule item complete all as specified and directed. Please Enable Macros to View BoQ information |
