|
| 1 | Providing and fixing of Hollock wooden jafri fixed with 3\\" wide strips in wooden frame 3\\"x1½\\" size at top & bottom to hold vertical strip wooden battens and fixing vertical batten of size 3' x 1½\\"@ 4.5\\" both side of frame with nails and screws supported with angle iron 50mmx50mmx5mm thick including painting/ priming coat etc complete in all respect |
| 2 | Dismantling glazed tiles (to be carefully removed). (CSR 8.35) |
| 3 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete (a) Size 600x600 mm (CSR 14.113 a)) |
| 4 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete (CSR 14.125) |
| 5 | Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge. (CSR 14.135) |
| 6 | Providing and applying Anti Termite Treatment using post constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 3 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturers specifications by drilling holes in the floor slab & along skirting 300 mm apart & 12 mm dia, drilling holes along all possible entry points such as junctions of floor and walls, door frames, sewage lines, entry points , etc. & injecting them with the chemical solution (CSR 14.132) |
| 7 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) :For fixed portion and chawkhats (CSR 17.45 (a) |
| 8 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (CSR 17.45 b) |
| 9 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on Both side. (CSR 17.46 (ii)) |
| 10 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) (i) Float glass panes of 5 mm thickness (CSR 17.47 (i) |
| 11 | Providing & fixing 6\\" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.69) |
| 12 | Providing & fixing 6\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge (CSR 17.76) |
| 13 | Providing & fixing 8\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.77) |
| 14 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (b ) I.S.I Designation No. III (size of door 701mm to 850mm) (CSR 17.43 (b) |
| 15 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (A) 300mm x 16mm (CSR 17.49 A) |
| 16 | Providing & fixing 4\\" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.68) |
| 17 | Providing & fixing 4\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.75) |
| 18 | Renewing glass panes with wooden fillets wherever necessary (b) Glass panes weighing 10.75 Kg/sqm (CSR 31.6 (b)) |
| 19 | Providing and fixing of 8mm thick toughened glass complete in all respect |
| 20 | Providing and fixing door stopper including screws complete in all respect |
| 21 | Providing and fixing of stainless steel hinges i/c screws complete in all respect |
| 22 | Providing and fixing dead lock ISI marked on door & window frames complete in all respect |
| 23 | Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work (CSR 18.48) |
| 24 | Providing and fixing of cupboard made of 19mm thick commercial board finished with lamination from both sides (including partition and drawers) complete in all respect i/c necessary fittings |
| 25 | Providing and fixing of M.S. steel spiral staircase i/c painting complete in all respect. |
| 26 | Supply & Fixing Fiber Glass Coated Mesh with thickness of 45 Gsm for the water proofing of roof (CSR 13.90) |
| 27 | Water proofing treatment of Roof Slab with High performance cementitious two component product, cons (CSR 13.91) |
| 28 | Providing and fixing fibre sheet complete in all respect |
| 29 | Providing and fixing of wall paper as per selected design complete in all respect |
| 30 | 12.5 mm thick cement plaster 1:5 (CSR 15.10) |
| 31 | Providing and fixing of Mortize lock i/c screw complete in all respect Please Enable Macros to View BoQ information |
