|
| 1 | Material & Labour for preparation of old white wash wall surfaces and applying one coat of white wash, complete all as specified and directed. |
| 2 | Material & Labour for preparation of old white wash ceiling surfaces and applying one coat of white wash, complete all as specified and directed. |
| 3 | Material & Labour for preparation of old plastic emulsion treated wall surfaces and applying once coat of plastic emulsion paint after removing nails and finish with wall care putty on walls, complete all as specified and directed. |
| 4 | Material & Labour for preparation of old plastic emulsion treated wall surfaces and applying once coat of plastic emulsion paint on ceilings, complete all as specified and directed. |
| 5 | Material & Labour for preparation of surfaces of plastered or un-plastered old distempered wall surfaces and applying one coat of 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, on walls etc. complete all as specified and directed. |
| 6 | Material & Labour for preparation of surfaces of plastered or un-plastered old distempered ceiling surfaces and applying one coat of 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, on ceiling etc. complete all as specified and directed |
| 7 | Material & Labour for scraping / taking down existing treatment completely from wall surfaces and applying two coats of 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, over a coat of alkali resistant primer after removing nails and finish with wall care putty on walls complete all as specified and directed. |
| 8 | Material & Labour for scraping / taking down existing treatment completely from wall surfaces and applying two coats of 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, over a coat of alkali resistant primer over a coat of 2.0 mm thick wall care putty and finishing smooth on walls including removal of nails, complete all as specified and directed. |
| 9 | Material & Labour for scraping / taking down existing treatment completely from walls and applying two coats of plastic emulsion paint over a coat of alkali resistant primer over a coat of 2.0 mm thick wall care putty and finishing smooth on walls including removal of nails, complete all as specified and directed. |
| 10 | Material & Labour for preparation of surfaces of plastered or un-plastered old treated wall surfaces and applying one coat of cement based paint on walls complete all as specified and directed. |
| 11 | Material & Labour for scraping / taking down existing treatment completely from wall and applying two coats of cement based paint over a coat of alkali resistant primer after removing nails and finish with wall care putty on walls complete all as specified and directed. |
| 12 | Material & Labour for scraping / taking down existing treatment completely from wall and applying two coats of weather proof paint (exterior emulsion apex) over a coat of primer over a coat of 2.0 mm thick wall care putty and finishing smooth on walls up to 5th Floor complete all as specified and directed. ( Note :- Rate quoted by the bidder is deemed including Necessary Scaffolding upto 5th Floor) |
| 13 | Material & Labour for scraping / taking down existing treatment completely from wall and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 14 | Material & Labour for preparation of old painted surface of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 15 | Material & Labour for preparation of old painted surface of steel and iron work of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 16 | Material & Labour for preparation of old painted surface of eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.), complete all as specified and directed. |
| 17 | Taking down cement plaster on brick or stone walls etc. including racking out joints hacking for key, scrubbing down with water etc. and rubbish off the premises of MD land complete all as specified and directed. (Note :- Rate quoted by the bidder is deemed including Necessary Scaffolding upto 5th Floor). |
| 18 | Material & Labour for rendering 15mm thick cement mortar 1:4 on fair finish surface of brick/concrete surface and finished even and fair including mixing of water proofing compound complete all as specified and directed.(Note :- Rate quoted by the bidder is deemed including Necessary Scaffolding upto 5th Floor) |
| 19 | Material & Labour for preparations of newly plastered surfaces of wall and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 20 | Material & labour for rendering 15mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and fair complete all as specified and as directed. |
| 21 | Material & labour for preparation of newly plastered surfaces of wall and applying two coats of 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, over a coat of alkali resistant primer over a coat of 2.0 mm thick wall care putty and finishing smooth on plastered surface complete all as specified and directed. |
| 22 | Material & labour for preparation of newly plastered surfaces of wall and applying two coats of plastic emulsion paint over a coat of alkali resistant primer over a coat of alkali resistant primer over a coat of 2.0 mm thick wall care putty and finishing smooth on plastered surface complete all as specified and directed. |
| 23 | Material & Labour for preparation of old treated wooden surfaces and applying a coat of varnishing on old treated wooden surfaces of any description, over 10cm in width or girth, complete all as specified and directed. |
| 24 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 25 | Material & labour for precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar complete 1:6, complete all as specified and directed. |
| 26 | Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off from the premises of MD land complete all as specified and directed. |
| 27 | Material & labour for dark coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile, over with and including backing layer of 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 28 | Material & labour for coloured glazed ceramic tile in vertical surfaces of size 300 x 600 and 9 to 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile, over with and including 10mm thick rendering as backing coat in cement mortar (1:4) for receiving of tiles complete all as specified and directed. |
| 29 | Material & labour for light shade vitrified ceramic tiles 9 to 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile, over with and including backing layer of 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 30 | Material & labour for light shade vitrified ceramic tiles 9 to 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile, over with and including 10mm thick rendering as backing coat in cement mortar (1:4) for receiving of tiles complete all as specified and directed. |
| 31 | Supply and fixing in repair stainless steel chromium plated curtain rod with fixing brackets, stops, rollers etc., complete all as specified and directed. |
| 32 | Supply and fixing in repair stainless steel bracket/ holder for curtain rod fixed with screws complete all as specified and directed. (Design and colour approved by GE) |
| 33 | Supply and fixing in repair aluminium door closer (Die cast body) for aluminium door size 6000x 1100mm environment conditions accessibility to closer arm space limitations on the top rail of door closer position, complete all as specified and directed. |
| 34 | Supply and fixing in repair wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples, size of mesh 12mm, complete all as specified and directed. |
| 35 | Supply and fixing in repair brass mortice lock, 4 levers vertical type size 100mm, complete all as specified and directed. |
| 36 | Taking down aluminium door shutters of any description exceeding 1 Sqm and not exceeding 2.00 Sqm each and refixing in the same opening/other opening after easing and adjusting including refixing butt hinges/tower boult as required and renewal of unserviceable screws/rubber beading, complete all as specified and directed. |
| 37 | Taking down aluminium window/ventilators shutters of any description not exceeding 1.00 Sqm each and refixing in the same opening/other opening after easing and adjusting including refixing butt hinges/tower boult as required and renewal of unserviceable screws/rubber beading, complete all as specified and directed. |
| 38 | Supply and fixing in repair bevelled edge 5.5 mm thick mirror of selected quality glass, 660 x 450 mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. Please Enable Macros to View BoQ information |
| 39 | Supply and fixing in repair bevelled edge 5.5 mm thick mirror of selected quality glass, 660 x 450 mm size, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. Please Enable Macros to View BoQ information |
