|
| 1 | Taking down chowkats or frame exc 1.5 Sqm and n exc 4.0 Sqm each (without taking off shutter from the fram) all as speified and as directed. |
| 2 | Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the fram) all as speified and as directed. |
| 3 | Taking down shutter only of any description exc 1Sqm n. exc 2 .0 Sqm and removing all as speified and as directed. |
| 4 | Taking down shutter only of any description n exc 1Sqm and removing all as speified and as directed. |
| 5 | Re-screwing or easing & adjusting with out taking down shutter of and description n.exc 1 Sqm. |
| 6 | Re-screwing or easing & adjusting with out taking down shutter of and description exc 1Sqm & n.exc 2 Sqm. |
| 7 | Taking down Shutter exc 1 sqm but n exc 2 sqm each and refixing in the same opening incl all necessary bolts, screws etc. complete all as specified and directed |
| 8 | M&L 2nd class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both face.The size of rail and style as per IS:1003(Part-I), klin seasoned and chemically pressed treated and all as Specified and as directed by Engineer- in -Charge. |
| 9 | M&L 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed by Engg. In Charge. |
| 10 | M&L Factory made flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in shutter all as specified and as directed. |
| 11 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete |
| 12 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingspecification and drawing complete |
| 13 | M&L Factory made flush shutters 25mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter as in shutter all as specified and as directed.. |
| 14 | S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding comlete.. |
| 15 | S&F for 100mm long butt hinges, medium weight , cold rolled mild steel and fixed |
| 16 | S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed. |
| 17 | All as per item No 19 above but 150mm long all as directed. |
| 18 | S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm. |
| 19 | S&F for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. |
| 20 | S&F for 100mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. |
| 21 | S&F Hasp and staple, safety type aluminium anodized including bolt to hinge plate and fixed with screws 100 mm size complete all as specified and directed. |
| 22 | S&F in repair door stopper of aluminum alloy body and tongue double legged anodized with hard draw steel spring over all length of cover plate 150mm fixed in floor all as specified (ISI Marked). |
| 23 | S&F in repair 18/19 mm thick pre laminated particle board (ISI Marked) exterior grade, laminated both side fixed with screws to timber work in cupboard, cupboard shutter etc. completed all as directed by Engineer-in-charge. |
| 24 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished completed all as directed by Engineer-in-charge. |
| 25 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,plaster work on edges during fixing (if required)etc all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 26 | S&F in repair Door closer hydraulically regulated, designation No. 3, Aluminium (Die Cast Body) universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 27 | S&F Aluminium Mortice lock, vertical type, size 100 mm 4 levers all as specified. |
| 28 | S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples. |
| 29 | all as per item No 28 above but fixed in repair |
| 30 | S&F in repair Sheet glass 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as directed. |
| 31 | S&F 4 mm thick tinted glass fixed to wooden/ aluminium joinery complete all as specified and directed. |
| 32 | S&F Framed work ( Fe 290 gde E 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing complete all as specified and as directed |
| 33 | Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and as directed. |
| 34 | M&L painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation , priming with zinc chromate and two coats of synthetic enamel paint complete. |
| 35 | M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer. |
| 36 | Taking dawn rolling shutter incl all fittings all as specified and as directed. |
| 37 | S&F in repair steel rolling shutter (with 1.25mm thick laths) with out ball bearing as specified incl top cover anchoring rod hasp and staple and one shap coat of primer erected in position but gear operated type with bevel gear box and crank handle all as specified and as directed. |
| 38 | S&F Ball bearing for rolling shutters all as specified and as directed. |
| 39 | M&L for oiling/greasing of Rolling shutter, repair of ball bearing for rolling shutter/ repair of locking system and to made smooth function etc all as specified and as directed. |
| 40 | S & F (in repair) Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as require all as directed |
| 41 | S&F mild steel hold fast etc conforming to Fe-410-0 or 310-0. |
| 42 | M&L cutting holes in brick wall for inserting hold fast etc. built in CM of depth exc. one brick but n. exc. two brick thick wall making good dismantled portion in cement mortar in (1:3) or PCC (1:2:4) type B1 as specified. |
| 43 | M&L for post construction Anti Termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed |
| 44 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 45 | Demolition of brickwork or stone/boulder masonry built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings complete all as specified and directed. |
| 46 | Dismantling floor, hearth or including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 47 | Supply only liquid water proofing compound complete all as specified and directed. |
| 48 | Supply only integral water proofing compound (Powder) complete all as specified and directed. |
| 49 | M&L Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 50 | Cutting chases in brick walls, for concealed water tubing , etc., and making good in CM 1:3, cutting exc 10 cm and n.exc 20cm girth complete all as specified and directed. |
| 51 | M&L for Plain cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in 75mm thick flooring finished surfaces even and fair without using extra cement, complete all as specified and as directed. |
| 52 | M&L for Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed. |
| 53 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 54 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular ) matching area of each tiles exc 0.06 sqm but not exc 0.11 sqm in vertical surface set and jointed in neat cement slurry and pointed in white cement to match as in skirting over and including 10 mm thick rendering in CM 1:4 as backing coat, even and fair to receive tiles etc complete all as specified and directed. |
| 55 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed 15mm thick in CM 1:6, complete all as spd. |
| 56 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular ) area of tiles exc 0.18 sqm but not exc 0.38 sqm matching shade set and jointed in neat cement slurry and pointed in white cement to match as in skirting over and including 10 mm thick rendering in CM 1:4 as backing coat, even and fair to receive tiles etc complete all as specified and directed. |
| 57 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished (light shade doubly charged), area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thcik screed bed in CM 1:6 complete all as specified and directed. |
| 58 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished (light shade doubly charged), as in skirting, dado etc with matching to item No 57.00 above set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thcik cement plaster in CM 1:6 complete all as specified and directed. |
| 59 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 60 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed. |
| 61 | M&L for Rendering 15mm thick on other than fair faces of brick work or stone surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed. |
| 62 | M&L for rendering 10mm thick on concrete surfaces such as on ceiling finished surfaces even and smooth without using extra cement in cement mortar 1:3 complete all as specified and directed. |
| 63 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of Oil Bound Distemper over and including a priming coat, complete all as specified and directed |
| 64 | M&L for Preparation of newly plastered surfaces of ceiling and applying two coats of Oil Bound Distemper over and including a priming coat, complete all as specified and directed |
| 65 | M&L for Preparation of New plastered surfaces of walls and applying two coat of Oil Bound Distemper over 2 mm thick wall care putty complete all specified and directed. |
| 66 | M&L preparation of newly plastered or unplastered surfaces of walls and applying two coats of exterior ACRYLIC Emulshion paint Camouflage pattern over a priming coat on walls upto Ist floor including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed (Colour/shade as directed by GE). |
| 67 | S&F 15mm bore Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 68 | S&F 20mm bore Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 69 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 70 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 71 | Dismantling water tanks and removing to store Exc 250 & n exc 500 complete all as specified and directed. |
| 72 | Dismantling water tanks and removing to store Exc 500 & n exc 1000 complete all as specified and directed. |
| 73 | Cleaning and removing all scale and dirt, etc, from tanks exc 250 and n.exc 500 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed. |
| 74 | Cleaning and removing all scale and dirt, etc, from tanks exc 500 and n.exc 1000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed. |
| 75 | Cleaning and removing all scale and dirt, etc, from tanks exc 1000 and n.exc 2000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed. |
| 76 | S&F Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 77 | S&F Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 78 | S&F in repair PVC water storage tank cover for 500/1000 ltr capacity with pvc nut and bolt and fixing arrangement complete all as specified and directed. |
| 79 | S&F in repair 15mm dia Bib taps fancy type CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 80 | S&F in repair 15mm dia Bib taps CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 81 | S&F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 82 | S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 83 | S&F in repair 15mm dia Stop valves, cast copper alloy fancy type CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 84 | S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 85 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 86 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 87 | S&F in repair 15mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 88 | S&F in repair 20mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 89 | S&F in repair 25mm size Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 90 | S&F in repair 32mm size Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 91 | S&F in repair 40mm size Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 92 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed. |
| 93 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed. |
| 94 | S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 95 | S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 96 | S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 97 | S&F 110mm dia PVC (SWR) branch piece, single (single T) equal or unequal complete all as specified and directed. |
| 98 | S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 99 | S&F 110mm dia PVC (SWR) 'P' trap complete all as specified and directed. |
| 100 | S&F 110mm dia PVC (SWR) 'S' trap complete all as specified and directed. |
| 101 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 102 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, and flush pipe) complete all as specified and directed. |
| 103 | S&F in repair vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and including flush pipe) complete all as specified and directed. |
| 104 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 105 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 106 | S&F in repair Vitreous Cliina wash basin, while, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 107 | S&F in repair 10ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 108 | S&F in repair Flush pipes to pedestal pan, including all joints complete all as specified and directed. |
| 109 | S&F in repair flush pipes to squatt pattern closet including all joints and making good to the floor complete all as specified and directed. |
| 110 | S&F in repair 25mm dia Stainless steel tubular curtain Rails CP incl fancy type brckets both side fixed complete all as specified and directed. |
| 111 | S&F in repair Towal rail 600mm long of PTMT fixed with and including chorimum plated brass screws and wooden/plastic cleats fixed complete all as specified and directed. |
| 112 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 113 | S&F single mirror bathroom cabinet moulded body and frame (made of strong and fine quality ABS) with hanged door (Size 16\\"x12\\") white in colour make as approved by GE fixed to wall with appropriate rowl plugs complete all as specified and directed. |
| 114 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 115 | S&F in repair jet spray ss complete set for EWC complete all as specified and directed. |
| 116 | S&F plastic seat cover for pedestal pan WC white in colour with flat bottom incl chromium plated hinging divice complete all as specified and directed. |
| 117 | S&F in repair plastic seat cover for pedestal pan WC white in colour with flat bottom incl chromium plated hinging divice complete all as specified and directed. |
| 118 | S&F in repair stainless steel bright finish round shape 100mm size fixed grating over floor trap in white or gray cement to match with existing floor complete all as specified and directed. |
| 119 | Description all as per item No 115.00 here-in-before but 125mm size with access hole for inserting waste pipe etc complete all as specified and directed. |
| 120 | S&F in repair shower rose brass chromium plated 125mm size complete all as specified and directed. |
| 121 | S&F health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook incl making connections and fixed in postion complete in all respect asspecified and directed |
| 122 | Supplying and laying 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 123 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 124 | S&F PVC waste pipe 32mm size with PTMT nuts of length 600mm for wash hand basin/urinal/sink etc complete all as specified and directed. |
| 125 | Removing existing unserviceable water proofing treatment taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises complete all as specified and directed |
| 126 | M&L for 15 mm thick screed bed in CM 1:4 mixed with WPC 3% by weight of cement complete all as specified and directed.Note: Water proofing compound shall be measured and paid separately under respective item of BOQ. |
| 127 | M&L for applying cold bituminous primer @ 0.30 ltr/Sqm confirming to IS-3384 and laying APP polymer modified fiber glass reinforced membrane 3mm thick weight not less than 3.5kg/sqm (modified bituminous water proofing membrane ) with plain finish with polyester base reinforcement, sealing all over with lap of 100mm in length side and 150mm on width side of membrane by torching the same and including applying a coat of bituminous aluminium paint @ 100 gms/sqm all as per manufacturer instructions complete all as specified and directed . |
| 128 | M&L for providing cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate laid to slope 1:30 in padding for WPT over roof slab,filling of pressed steel door frame complete all as specified and directed |
| 129 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks exc 500 and n.exc 1000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed. |
| 130 | Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed. |
| 131 | S&F false ceiling work with galvanised MS ceiling grid system UNLOCK comprising of main runner 34mmx24mmx0.35mmand GI suspender 8 mm dia fixed to ceiling and fixing mineral fibre acoustic ceiling board of size 600mmx600mmx12 mm thick complete all as specified and as per manufacturers instructions including taking down existing ceiling of any description complete all as specified and directed. |
| 132 | M&L for preparation of old decorated surfaces of walls including cornices , plasters by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on walls upto 4th floor including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed |
| 133 | Descripton all as per item above but applying two coats of white wash on wall surfaces after complete all as specified and directed |
| 134 | Descripton all as per item above but applying one coat of white wash on ceiling surfaces complete all as specified and directed |
| 135 | Preparation of old painted surfaces of wood and wooden based material of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed |
| 136 | Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed |
| 137 | M&L for preparation of old decorated surfaces of walls including cornices , pilasters by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil bound emulsion distemper on wall surfaces including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed |
| 138 | Description all as per item above but applying one coat of oil bound emulsion distemper on ceiling surfaces complete all as specified and directed |
| 139 | M&L for complete removal of existing treatment on wall surfaces by scraping down, rubbiing down and washing with water to the satisfaction of Engineer-in-Charge and applying two coats of oil bound emulsion distemper on walls (as approved by GE) and to be applied only by the authorised applicater of manufacturers (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed |
| 140 | Description all as per item above but applying two coats of oil bound emulsion distemper on ceiling surfaces complete all specified and directed |
| 141 | M&L for complete removal of existing treatment on wall surfaces by scraping down, rubbiing down and washing with water to the satisfaction of Engineer-in-Charge and applying two coats of Oil Bound Emulsion distemper over and including applying 3mm thick wall care putty on walls (as approved by GE) including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed . |
| 142 | M&L for complete removal of existing treatment on ceiling surfaces by scraping down, rubbiing down and washing with water to the satisfaction of Engineer-in-Charge and applying two coats of Oil Bound Emulshion distemper over and including applying 3mm thick wall care putty on ceilings including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed |
| 143 | M&L for preparation of old plastered or unplastered surfaces of walls including cornices, pilasters by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy \spots to the entire satisfaction of Engineer-in-Charge and applying one coats of exterior ACRYLIC Emulshion paint Camouflage pattern as per approved CCD Scheme design (Colour or shade as approved by GE) Camouflage pattern as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed |
| 144 | M&L for complete removal of existing treatment by scraping down completely on brick/stone walls/concrete surfaces thoroughly, rubbing down washing with water to the entire satisfaction of Engineer-in-Charge and applying two coats of exterior ACRYLIC Emulshion paint Camouflage pattern as per approved CCD Scheme design (Colour or shade as approved by GE) Camouflage pattern over and including a coat of primer as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed |
| 145 | Description all as per item above but on ceiling surfaces complete all as specified and as directed |
| 146 | M&L for preparation of old plastered or unplastered surfaces of walls including cornices , pilasters by brooming down or steel wire brushing , scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy \spots and applying one coat of Cement Base Paint on walls including necessary steel scafolding upto 4th storey complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed |
| 147 | M&L for complete removal of existing treatment by scraping down completely on brick walls/stone walls/concrete surfaces plastered or unplastered thoroughly, rubbing down, washing with water to the entire satisfaction of Engineer-in-Charge and applying two coats of Cement Base Paint in Camouflage pattern as per approved CCD Scheme design (Colour or shade as approved by GE) as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed |
| 148 | M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 all as per manufacturer's instructions and complete all as specified and directed. |
| 149 | Cutting down vegitation growth like plants/trees of girth n.exc.15cm from roof tops/sides, external walls of bldgs, chajjas, wall junctions at junctions of rain water/CI waste water pipe junctions including removal of roots embedded in walls/slab surfaces and taking out carefully possible quantity of concrete in roofs including reparing the GI/CI/PVC pipe joints of that affected location and applying TUFALO chemical (herbal medicine) to arrest further growth and making good the disturbed surfaces with PCC (1:2:4) type B-1 or CM 1:2 or brick work in CM 1:4 and plastering with CM 1:4 with addition of WPC and treating the surface to match with the adjoining surfaces complete all as specified and directed .Note :- (a) The unit rate quoted shall be deemed to incl the cost of scafolding/staging etc. (b) Any CI/AC/PVC pipes & specials damaged during work shall be replaced by new one to ensure leakage/seapage free joint . Unit rate quoted shall deemed to include the cost for replacement of specials. |
| 150 | M&L for writing letters or figures (Block, Roman,Italic or Indian) n.exc. 30 cm high or building with synthetic enamel paint complete all as specified and directed |
| 151 | M&L for providing and placing in position Micro-concrete as per relevant ASTM/BS/IS having Compressive strength of 45 mpa at 2 days of make pidilite/BASF/Sika/Fosroc or equivalent in RCC members like roof projection, chajjas, beams, columns etc. which shall be pre-packed single component, chloride free, Non shrink, free flow, self compacting and mixed as per manufactures specifications, including reuired leak proof shuttering, presoaking of substrate, manual application or pumping, manpower and tools & tackels the satisfaction of EIC complete upto 4th floor height complete all as specified and directed |
| 152 | M&L for filling surface cracks not exc 7mm to 9mm wide with \\"Dr fixit\\" cracks X power or equivalent polymer modified cracks filler all as per manufacturer instructions complete all as specified and directed. |
| 153 | Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding. Please Enable Macros to View BoQ information |
