|
| 1 | Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws/ J-hooks complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws/ J-hooks complete all as specified and directed. |
| 4 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 5 | S&F anodised aluminium snap grid frame work (size of grid 605x605 mm) with 35x25x1.5 mm main tee and 25x25x1.4 mm cross tee and wall angle for false ceiling complete all as specified and directed. |
| 6 | S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 7 | M&L for 4 mm thickness non-asbestos fibre cement building boards (decorative type) fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws complete all as specified and directed. |
| 8 | Dismantling timber scantlings 40 sq. cm and over in section, unframed work, in any position complete all as specified and directed. |
| 9 | M&L for second class hardwood in scantlings, clean sawn complete all as specified and directed. |
| 10 | All as per Sl No. 9 here-in-before, but except scantlings complete all as specified and directed.(Note: Scantlings retrieved from item No. 8 will be reused) |
| 11 | Dismantling wooden fillets for roof tiles battens, rails, posts, rafters, purlins etc. under 40 sq.cm in section (unframed work) complete all as specified and directed. |
| 12 | M&L for second class hardwood plain fillets (sectional area exceeding 13 sq.cm and not exceeding 25 sq.cm), square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed. |
| 13 | All as per Sl No. 12 here-in-before, but except fillets complete all as specified and directed.(Note: Fillets retrieved from item No. 11 will be reused) |
| 14 | Demolition of brick or stone /boulder masonry built in cement mortar or cement lime mortar, including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and pre cast concrete articles and removing debris outside MD land complete all as specified and as directed. |
| 15 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 16 | M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall, mixed with integral water proofing compound @ 3% by weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement all as specified and as directed.Note:-WPC will be measured and paid separately as supply only. |
| 17 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing debris outside MD land complete all as specified and as directed. |
| 18 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub-base complete all as specified and directed. |
| 19 | M&L for coloured and polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors with grey pigment cement and pigments, including 20mm thick screed bed in CM 1:6 complete all specified and directed. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 21 | M&L for vitrified ceramic dark shade and double charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 22 | M&L for vitrified ceramic dark shade and double charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed. |
| 23 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 24 | M&L for rendering 15 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work/ PCC solid block masonry/ concrete surfaces, finished fair and even complete all as specified and directed. |
| 25 | Supply only integral water proofing compound all as specified and as directed. |
| 26 | M&L for preparation of new plastered or unplastered surfaces of wall and applying a layer plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. |
| 27 | M&L for complete removal of existing treatment on plastered or unplastered surfaces of wall and applying a layer over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. |
| 28 | M&L for complete removal of existing treatment applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade Company Depot Tinted) with silicon additives 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 29 | M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade Company Depot Tinted) with silicon additives 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 30 | Taking down chowkhats or frame not exceeding 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 31 | Taking down chowkhats or frame exceeding 1.50 and not exceeding 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 32 | Taking down shutters of any description not exceeding 1 sq.m complete all as specified and directed. |
| 33 | S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 34 | M&L for aluminium door single leaf with anodised aluminium frame of section 62.5x37x1.5 mm thick, shutter with bottom and middle rail of section 112.50x37x1.5 mm thick, styles and top rail of section 83x37x1.5 mm thick with centrally locking arrangement with lock make of 'Godrej' or 'Link' 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5.5 mm thick glass and 12 mm thick laminated particle board including necessary fittings, fixtures and aluminium snap beads and sun control film on 5.5 mm thick glass and door protected with aluminium grill complete all as specified and directed. |
| 35 | S&F 30 mm thick (batten thickness) second class hard wood, plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I) |
| 36 | M&L for aluminium windows/ ventilators (partially openable type) with aluminium anodised frame of aluminium section 62.5x37x1.5 mm thick with shutters having styles & rails of aluminium section 47.62x44.45x1.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws, anodised aluminium fittings such as hinges, tower bolts, handles etc including 5.5 mm thick frosted glass and glass covered with sun control film, window/ ventilators protective with aluminium grill complete all as specified and directed. |
| 37 | S&F 200mm long aluminium anodised barrel tower bolts of extruded sections all as specified and directed. |
| 38 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel all as specified and directed. |
| 39 | S&F 300 mm length Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed. |
| 40 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 41 | M&L for preparation of old wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 42 | S&F in repairs looking mirror, size 600mmx450mm, bevelled edge, selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with teak wooden polished beading work complete all as specified and directed. |
| 43 | S&F in repairs PVC connections 15mm size, 600mm length with 02 Nos brass check nuts with washer etc complete all as specified and directed. |
| 44 | S&F in repairs stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions or fixed for 15mm bore dia of pipe complete all as specified and directed. |
| 45 | S&F 15 mm bore unplasticised PVC pipes and fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., including taking down old pipe complete all as specified and directed. |
| 46 | S&F 20 mm bore unplasticised PVC pipes and fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., including taking down old pipe complete all as specified and directed. |
| 47 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in stone concrete block walls complete all as specified and directed. |
| 48 | S&F in repairs grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. |
| 49 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 50 | S&F in repairs PVC (SWR) floor trap, outlet 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 51 | S&F 40 mm (Dia of discharge pipe) waste coupling of brass chromium plated (half or full threaded) complete all as specified and directed. |
| 52 | S&F in repairs 40mm dia PVC flexible waste pipe 90 cm long with union for WHB/ sink complete all as specified and directed. |
| 53 | S&F in repairs pillar taps of size 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts screwed for iron pipe complete all as specified and directed. |
| 54 | S&F rotational moulded polyethylene water storage tanks of 1000 ltrs capacity, triple layer (cylindrical vertical with closed top), white, hoisted and fixed in position all as specified in SSR Part I and 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and connecting inlet, outlet pipe lines, including taking down old water tank complete all as specified and directed. |
| 55 | S&F TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 56 | M&L for precast cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4 complete all as specified and directed. |
| 57 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed. |
| 58 | M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 59 | Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed. |
| 60 | M&L for aluminium partition with anodised aluminium frame powder coated with 50 microns of section 62.5x37x1.5 mm thick, shutter with bottom and middle rail of section 112.50x37x1.5 mm thick, styles and top rail of section 83x37x1.5 mm thick including jointing cleats, fixed in position with screws and brackets and glazing with 5.5 mm thick glass and 12 mm thick laminated particle board including necessary fittings, fixtures and aluminium snap beads and sun control film on 5.5 mm thick glass complete all as specified and directed. |
| 61 | S&F in repairs looking mirror, bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with including aluminium edging around the mirror fixed on wall complete all as specified and directed. |
| 62 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and including 32 mm bore PVC flush pipe complete all as specified and directed. |
| 63 | S&F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 64 | S&F matt or mirror finish stainless steel sensor single station surgical scrub sink station for hospital purpose as required including taking down old stainless steel sink complete all as specified and directed. |
| 65 | S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor with provision of lime concrete bedding complete all as specified and directed. |
| 66 | S&F in repairs wash basin, vitreous china (flat back), size 630 mm x 450 mm, white including cutting for and pinning in ends of brackets or erecting stand with waste pipe including PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 67 | S&F in repairs vitreous china wash down water closet pan S and P trap (pedestal pattern), white including fixing bolt, plastic water closet seat, white, or black colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage etc complete all as specified and directed. |
| 68 | Taking down shutters of any description exceeding 1 sq.m and not exceeding 2 sq.m each and refixing in same opening by making good complete all as specified and directed. |
| 69 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 70 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 71 | S&F 150mm size aluminium handles, cast type, anodised, all as specified and directed. |
| 72 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.50 sqm in each pane including taking down hacking out old glass complete all as specified and directed. |
| 73 | M&L for 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 74 | S&F continuous (Piano) hinges, mild steel bright finished or electrogalvanized, width of flaps (when open) 30 mm complete all as specified and directed. |
| 75 | S&F 150mm size aluminium anodised hasp and staple, safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 76 | M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed. |
| 77 | M&L for glazed ceramic coloured tiles in vertical surface 300x 200x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick backing on stone/ brick masonry surfaces in cement mortar (1:4) complete all as specified and directed. |
| 78 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 79 | S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, fixed to walls complete all as specified and directed. |
| 80 | S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 81 | Taking down carefully copper/aluminium point wiring of light, fan, socket or power socket complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of walls, floor ceiling etc, match the existing complete all as specified and directed Please Enable Macros to View BoQ information |
| 82 | Taking down carefully copper/aluminium point wiring of light, fan, socket or power socket complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surfaces of walls, floor ceiling etc, match the existing complete all as specified and directed Please Enable Macros to View BoQ information |
