|
| 1 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed. |
| 2 | M&L for second class hardwood as in scantlings clean sawn timber fixed including dismantling of old unsv scantling from its positions complete all as specified and as directed. |
| 3 | M&L for second class hardwood plain fillets exc 13sqcm and not exc. 25sqcm, square or rectangular in section, wrought, secured with nails or brads complete all as specified and as directed. |
| 4 | M&L for brick work with sub class `B' bricks(using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) including demolition of old brick work from its position complete all as specified and as directed. |
| 5 | M&L for brick work with sub class `B' bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick work from its position complete all as specified and as directed. |
| 6 | M&L for 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers even and smooth without using extra cement using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement) including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including provision of GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed. |
| 7 | M&L for 12 mm thick plastering in CM (1:6) on the other side of lathing finished even and smooth without using extra cement complete all as specified and as directed. |
| 8 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A and painted one shop coat of zinc chromate primer paint including preparation of surface at contractors workshop complete all as specified and as directed. |
| 9 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde-E- 250) quality- A complete all as specified and as directed. |
| 10 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors laid over and including 15mm thick screed bed for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles from its positions complete all as specified and as directed. |
| 11 | All as per Item No. 10.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM (1:4). |
| 12 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors laid over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles from its positions complete all as specified and as directed. |
| 13 | M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over and including backing coat of 10 mm thick in CM (1:4) including dismantling of old tiles from its positions complete all as specified and as directed. |
| 14 | M & L for PCC 25 mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate) as in levelling course of floor complete all as specified and as directed. |
| 15 | M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed. |
| 16 | M&L for forming contraction (dummy) joints 65mm deepx10mm wide, filled with sealing compound. complete all as specified and directed. |
| 17 | S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) non asbestos fibre cement reinforced multipurpose board, pre-primetered self embossed, textured designer board E-Board Classic fixed or laid/inserted to timber/ GI frame work with screws to be fixed in ceiling flat or sloping and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre both ways, size of grid 605 x 605mm fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size including dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed. |
| 18 | Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 19 | Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 20 | M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and as directed. |
| 21 | S&F 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 22 | M&L for factory made 30 mm thick 2nd class hard wood Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified. |
| 23 | S&F in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples. |
| 24 | S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification etc complete all as specified and directed. |
| 25 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification etc complete all as specified and directed. |
| 26 | S&F butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm long size complete all as specified and as directed. |
| 27 | S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long complete all as specified and as directed. |
| 28 | S&F Aluminium handle cast type anodised 150 mm long complete all as specified and as directed. |
| 29 | S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type fixing clips of sheet cast or extruxded section)(300 mm long) complete all as specified and directed. |
| 30 | S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 31 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and as directed. |
| 32 | M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete work finishing the surfaces even and smooth without using extra cement including taking down old plaster from its position complete all as specified and directed. |
| 33 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete work finishing the surfaces even and smooth without using extra cement including taking down old plaster from its position complete all as specified and directed. |
| 34 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over wall care putty(2mm thick in two layers) on wall surfaces complete all as specified and as directed. |
| 35 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer of approved shade on walls complete all as specified and as directed. |
| 36 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint complete all as specified and as directed. |
| 37 | M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 38 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 39 | M&L applying one coat of synthetic enamel paint (1st grade) on old decorated steel surfaces of any description including preparation of old steel surfaces area over 10cm width & girth complete all as specified and as directed. |
| 40 | S&F in repairs GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls complete all as specified and as directed. |
| 41 | All as per item No-40.00 here-in-before but but refixing only |
| 42 | S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls complete all as specified and as directed. |
| 43 | S&F in repair GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls complete all as specified and as directed. |
| 44 | All as per item No-43.00 here-in-before but but refixing only |
| 45 | S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls complete all as specified and as directed. |
| 46 | S & F in repairs vitreous china bowl urinal flat back of size 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. |
| 47 | S&F in repairs vitreous china squatting pan 'orissa' pattern size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 48 | S&F PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket , inlet ball valve, float handle and flush pipe (for EWC or WC) complete all as specified and as directed. |
| 49 | S&F framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted or forged into spikes ; framed gurad bars ; barred iron doors, ladders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 include riveting and welding as directed and fixing with screws ,bolts, complete all as specified and as directed. |
| 50 | S&F in repairs rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I with and including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed. |
| 51 | S&F cast iron P or S trap of 100 mm dia complete all as specified and as directed. |
| 52 | Supply & fixing as in repair 15mm Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by the Engr-in-Charge. |
| 53 | S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed. |
| 54 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 55 | S&F in repairs 600 X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board fixed to wooden plugs with CP brass screws and cup washer etc complete all as specified and directed. |
| 56 | S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 57 | S&F in repairs corner glass shelf assembly 250 mm radius made of 6 mm thick acrylic glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed. |
| 58 | S&F in repairs vitreous china fancy wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed. |
| 59 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/wall complete all as specified and as directed. |
| 60 | S&F 110mm dia PVC (SWR) bends complete all as spfd & directed |
| 61 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/wall complete all as specified and as directed. |
| 62 | S&F 75mm PVC(SWR) bends any radius with acess door complete all as spfd & directed |
| 63 | M&L for cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drain bed and coping complete all as spfd & directed |
| 64 | M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed for laying floor finishes in cement mortar (1:6) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed. |
| 65 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds complete all as specified and as directed. |
| 66 | S&F in repairs for Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets , stops, rollers and rings complete all as specified and as directed. |
| 67 | S & F in repairs Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 68 | S & F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 69 | M&L for providing Machine cut ,mirror polished kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone floor/steps treads including rubbing and polishing complete all as specified and as directed. |
| 70 | M&L for providing Machine cut ,mirror polished kota stone slab flooring 20-25mm thick over and including 10mm thick baking coat in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab including rubbing and polishing complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 71 | M&L for providing Machine cut ,mirror polished kota stone slab flooring 20-25mm thick over and including 10mm thick baking coat in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab including rubbing and polishing complete all as specified and as directed. Please Enable Macros to View BoQ information |
