|
| 1 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed. |
| 2 | Ditto in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section unframed work complete all as specified and directed. |
| 3 | M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified and directed. |
| 4 | M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed. |
| 5 | Fixing only for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed. |
| 6 | M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote complete all as specified and directed. |
| 7 | Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and directed. |
| 8 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 9 | M&L for 12MM plywood,grade BWR, type BB, Fixed with screws to timber frame work complete all as specified and directed. |
| 10 | S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 11 | M&L for 6 mm thick teak wood lipping all around for 19/20 mm shutter including polishing painting fixed with adhesive headless screws complete all as specified. |
| 12 | S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 13 | M&L for non asbestos fibre cement building boards of 4mm thick fixed or laid/ inserted to timber frame work fixed in jointless finish with jointing compound and jointing tape as per manufacturer instructions complete all as specified and directed. |
| 14 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 15 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area n exc 1.5 sqm each complete all as specified and directed. |
| 16 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 17 | S&F for powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified. |
| 18 | S&F three track sliding powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified. |
| 19 | S&F in repair Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed complete all as specified. |
| 20 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of complete all as specified. |
| 21 | S&F for stainless steel double cylinder floor spring for wood/allum door with weight Upto 120 kg complete all as specified. |
| 22 | S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified. |
| 23 | M&L for 5.5 mm plain glass quality and glazing fixed to aluminium frame exc not 0.50 sqm complete all as specified and as directed. |
| 24 | M&L for 5.5 mm thick toufan glass quality and glazing fixed to aluminium frame/Shutter exc not 0.50 sqm complete all as specified and as directed. |
| 25 | S&F in repairs to 20mm dia (curtain rod) Harrison rails, aluminium anodised alloy with fixing brackets, stops, rollers et ccomplete all as specified. |
| 26 | S&F for brackets decorative (Lattoo) for 20mm dia curtain rods complete all as specified. |
| 27 | Demolation of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed. |
| 28 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate complete all as specified and directed. |
| 29 | M&L for polished Vitrified tile ultra charge , 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.38 ( 600x600) sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:6 complete all as specified. |
| 30 | Ditto all as per item No 29 above but over 10mm thick rendering in CM 1:4 as in skirting all as complete all as specified. |
| 31 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 32 | M&L for Non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified. |
| 33 | M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 34 | Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified. |
| 35 | Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified.- |
| 36 | S&F for Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 37 | All as per Item No 36 above here–in–before, but for 20mm dia (Bore) complete all as specified. |
| 38 | S&F in repairs CP wall mixer 3-in-1 system with provision for bath telephonic shower provision of over head shower complete with 115 mm long bend pipe of complete all as specified. |
| 39 | S&F in repair single lever Basin mixer with popup waste with 450 mm long braided hoses of complete all as specified. |
| 40 | S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of complete all as specified. |
| 41 | S&F in repairs bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commericial ply wood and fixed to wooden plugs with CP brass screw and cup washer complete all as specified. . |
| 42 | M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified. |
| 43 | M&L in repair for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified. |
| 44 | M&L in repair for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified. |
| 45 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 46 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 47 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified.. |
| 48 | S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 49 | S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 50 | S&F in repair Vitreous china (Pedestal pattern) WHB, white, flat back, size 550 x 400 mm including brackets, 32 mm waste coupling and 32 mm waste pipe all as specified and directed |
| 51 | S&F in repair Health faucet(ABS Body)mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as complete all as specified. |
| 52 | S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of complete all as complete all as specified. |
| 53 | S&F in repairs Soap dish holder of complete all as specified. |
| 54 | S&F in repairs Toilet roll holder with stainless steel flap of complete all as specified. |
| 55 | S&Fin repairs Towel ring square shape stainless steel of complete all as specified. |
| 56 | S&F in repairs corner glass shelf with bracket of complete all as specified. |
| 57 | S&F in repairs CP over head shower square shape of size 150x150mm of square shape for wall mounted showers flange of complete all as specified. |
| 58 | S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with brass chromium plated bracket guard and railing 60cm long complete all as specified. |
| 59 | S & Fixed for PVC mirror cabinet made of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified. |
| 60 | S&F for bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified. |
| 61 | S&F 75mm dia Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified. |
| 62 | S&F in repair tie hanger 250mm long, stainless steel body complete all as specified. |
| 63 | S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified . |
| 64 | S&F for PVC (SWR) pipes (half round of 150 mm with rounded edges) as eaves gutters incluing fixing asscessories as clip/cleats/rubber ring joints with regular interval of 2 mtr, single socketed complete all as specified and directed. |
| 65 | S&F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fix in eaves gutter as vertical complete all as specified and directed. |
| 66 | PVC Reducer 150 to 110 mm complete all as specified and directed. |
| 67 | Demolation of brick work/ solid concrete block work built in Cement mortar complete |
| 68 | M/L precast cement concrete block masonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 69 | M&L for PCC 1:3:6 type C-2 (using 20 mm graded stone aggr ), 75 mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc.2.00 complete all as specified. |
| 70 | M&L for rendering 15m thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified. |
| 71 | M&L for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified. |
| 72 | M& L for new surface applying Two or more coats (over 1 mm thick wall care putty ) of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. on old or previously untreated surface all as specified and directed . |
| 73 | M & L for preparation of new surfaces and applying two coat of oil bound distemper with roller over 1mm putty complete all as specified and directed. |
| 74 | M&L for MS framed work like grills grating, etc with ends of bars shouldered and/ or riveted or forged x spikes, framed guard bars beraed iron doors, ladders framed balusters work ways railing, frame work for water tanks and sililar work conforming to F.e 290 Gde-E-165 complete all as specified. |
| 75 | M & L for prepration of treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint on roof sheet complete all as specified and directed. |
| 76 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 77 | M&L for preparation of old wall surface and applying two finishing coat of oil bound distempering over 1mm of wall care putty and one coat of wall primer and complete all as specified and directed. |
| 78 | S&F 3 mm thick ACP (aluminium composite panel) sheet on wall/column/ceiling fixed with aluminium grid as required, any shape including joint filled with silicon and colour as approved complete all as specified and directed. Make: Aludecor / Eurobond/ Alstrong / Alstone / Alutech Panels). |
| 79 | Dismantling boarding any description fixed in any position with nails complete all as specified and as directed. |
| 80 | M&L for 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed . |
| 81 | M& L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. |
| 82 | S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) complete all as specified and as directed. |
| 83 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed. |
| 84 | S&F internal wall/ceiling panels on Light Gauge Steel Frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of category Ill type B (High pressure steam cured) as per standard sizes fixed with self-drilling/taping screws/fasteners@60cm c/c of approved make, Screws shall be counter sunk rib head of 1.60mm to 4mm thick of 8 to 1 0 gauge of length varying from 25 to 45mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. (cost of frame work to be paid for separately) . |
| 85 | M& L for Filling the grooves (i.e.2-3mm gap between boards). Taping and jointing of the first layer 6mm and 9mm thick cement boards with epoxy based sealing compound or with silicon sealant. Second layer is fixed over it in a staggered pattern. |
| 86 | S&F Anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve ceiling board complete all as specified and as directed . |
| 87 | M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 88 | S&F 10mm thk Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 89 | M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in hardstanding, path, plinth protection, sub-floors etc finished even and fair or even and rough as reqd complete all as specified and directed |
| 90 | M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains complete all as specified and as directed. |
| 91 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed. |
| 92 | M&L Precast cement concrete block masonry with solid block exc 10 Cm in width with PCC, type C1 (1:3:6) using 20mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed. |
| 93 | M&L Precast cement concrete block masonry with solid block 10 Cm thick with PCC, type C1 (1:3:6, using 20mm graded stone aggregate) (with plain or interlocking joints and setting in CM 1:4 complete all as specified and directed. |
| 94 | M&L for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 95 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed. |
| 96 | M&L for rendering 10mm thick in CM (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed |
| 97 | Supply only integral WPC (ISI Mark) |
| 98 | M&L Non skid Ceramic Parking tiles Dark shade 15 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed |
| 99 | M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth on 01 coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete all as specified and as directed. |
| 100 | M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steelheavy duty and fixed |
| 101 | S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed. |
| 102 | M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed. |
| 103 | M&L for Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed. |
| 104 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 105 | M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 106 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified. |
| 107 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, PVC conduit on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch. |
| 108 | Description all as per Srl item No 107 here in before but for socket outlet point 5 Amp on same board. |
| 109 | Description all as per Srl item No. 107 here in before but for socket outlet point 5 Amp on Independent board. |
| 110 | Description all as per serial item No 107 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and as directed. |
| 111 | Supply and fixing modular switch 1 way 6 A with cover plate and frame 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 112 | Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 113 | Supply and fixing modular switch 1 way 16 A with cover plate and frame230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 114 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. |
| 115 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 116 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 117 | Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 118 | Supply and fix Flexible LED strips complete all as specified and direcetd. |
| 119 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one . |
| 120 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed. |
| 121 | S & F Exhaust fan 230 volts , 300mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed. |
| 122 | Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule all as specified and directed . |
| 123 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. |
| 124 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. |
| 125 | Supply and fix MCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one all as specified and directed. |
| 126 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and directed. |
| 127 | Taking down existing energy meter and refixing the same after completion on the original location all work all as directed. |
| 128 | M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted. |
| 129 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. Please Enable Macros to View BoQ information |
