Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including ordinary soil, hard/gravelly soil and stony earth mixed with stone and boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 2 | Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. |
| 3 | Filling foundation trenches and plinth with excavated earth (excluding rock) including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 4 | Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 5 | Providing, mixing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables at the rate of 7.5liters per sqm on vertical surface and 5.0liters per sqm on horizontal surface, 50% of the emulsion to be filled in the holes made in treanches at 150mm centre to centre (or as directed directed by the manufacture) etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (Measurement should be taken as per plinth area and indemnity bond for warranty for 10 years to be furnished) |
| 6 | Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for complete the work as per direction of the Engineer-in-charge. |
| 7 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for complete the work as per direction of Engineer-in-charge. |
| 8 | Providing, lifting, hoisting and laying Reinforced cement concrete work of M-25 grade having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for complete the work in all respects as per drawing, design and direction of Engineer-in-charge. (But excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.) |
| 9 | Ground Floor |
| 10 | Foundation |
| 11 | Plinth Beam |
| 12 | Beam & Column |
| 13 | Lintel |
| 14 | Roof Slab |
| 15 | Staircase |
| 16 | Chajja |
| 17 | Roof Slab at Double Height |
| 18 | First Floor |
| 19 | Beam & Column |
| 20 | Lintel |
| 21 | Roof Slab |
| 22 | Staircase |
| 23 | Chajja |
| 24 | Second Floor |
| 25 | Beam & Column |
| 26 | Lintel |
| 27 | Roof Slab |
| 28 | Chajja |
| 29 | Slope roof |
| 30 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) |
| 31 | Ground Floor |
| 32 | First Floor |
| 33 | Second Floor |
| 34 | Providing and laying laterite stone masonry in cement mortar of mix (1:6) with Portland slag cement (PSC) in foundation & plinth with screened and washed sharp sand for mortar of approved quality from approved quarry including providing key stones in regular intervals for each layer including splays cutting, circular moulding and similar such type of works with all necessary projections, champering and corbelling, watering and curing etc. with all cost, conveyance, royalties, loading & unloading & tax of all materials and cost of all labour, sundries, T & P required for the work including hoisting, lowering, dewatering if required etc. complete in all respect as directed by Engineer-in charge. |
| 35 | Providing small eye Laterite stone masonary in foundation and plinth with cement mortar (1:4) using machine cut laterite stone of approved quality from approved quarry including cost of all material, all taxes and cost of all labour, conveyance, loading & unloading, royalties, hoisting, lowering, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge |
| 36 | Providing small eye Laterite stone masonary in superstructure with cement mortar (1:4) using machine cut laterite stone of approved quality from approved quarry including cost of all material, all taxes and cost of all labour, conveyance, loading & unloading, royalties, hoisting, lowering, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge |
| 37 | Ground Floor |
| 38 | First Floor |
| 39 | Second Floor |
| 40 | Brick work in foundation and plinth with flyash bricks of size 25cmx12cmx8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 41 | Brick work in superstructure with flyash bricks of size 25cmx12cmx8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 42 | Ground Floor |
| 43 | First Floor |
| 44 | Second Floor |
| 45 | Half Brick work in superstructure with flyash bricks of size 25cmx12cmx8cm in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) with provision of stiffner (2 nos of 8 m.m dia M.S. Round Reinforcement Bars at each 4th layers, paid separately) includes molding, chamfering, corbelling, complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. complete as per direction of Engineer in charge. |
| 46 | Ground Floor |
| 47 | First Floor |
| 48 | Second Floor |
| 49 | Providing & laying best quality Vitrified floor tile of specified size of thickness 6-10mm of approved make confirming to IS-15622 specifications in floor over 20mm thick cement mortar (1: 4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. Including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles complete as per the design & drawing with cost of all materials, labour, conveyance T&P etc. All complete as per the direction of Engineer -in-charge. Full body premium grade matt finish vitrified tiles of size 600mmx600mm Make : Somany, Kajaria, RAK, Johnson |
| 50 | Ground Floor |
| 51 | First Floor |
| 52 | Second Floor |
| 53 | Providing & laying vitrified tile of specified size in skirting cut from approved make confirming to IS-15622 specifications over 12mm thick cement mortar (1: 3) to proper line and level to a height as per design including cutting to required size and shape, fixing at corners and splays etc. including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles and complete as per the design & drawing with cost of all materials, labour, conveyance, taxes ,royalties,sundries and T&P etc. All complete as per the direction of Engineer -in-charge. Full body premium grade matt finish vitrified tiles of size 600mmx600mm. Make : Somany, Kajaria, RAK, Johnson |
| 54 | Ground Floor |
| 55 | First Floor |
| 56 | Second Floor |
| 57 | Providing & laying best quality Vitrified floor tile of specified size of thickness 6-10mm of approved make confirming to IS-15622 specifications in floor over 20mm thick cement mortar (1: 4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. Including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles complete as per the design & drawing with cost of all materials, labour, conveyance T&P etc. All complete as per the direction of Engineer -in-charge. Suede /Rustic finish Vitrified Tile 600x600mm. Make : Somany, Kajaria, RAK, Johnson |
| 58 | Ground Floor |
| 59 | First Floor |
| 60 | Second Floor |
| 61 | Providing and fixing ceramic glazed wall tiles of specified size of thickness 6-10mm conforming to IS: 15622 specifications of approved make and shade, in skirting and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and finishing the joint with epoxy based water proofing grout to match the shade. All complete as per the direction of Engineer-in-charge (Toilet) (Note- Sample of tiles shall be approved before procurement and use) Ceramic glazed Wall Tile 300 x 600mmMake : Somany, Kajaria, RAK, Johnson |
| 62 | Ground Floor |
| 63 | First Floor |
| 64 | Second Floor |
| 65 | Providing and fixing 16-18mm thick granite flooring of approved quality and size in floors, steps, landings, window sill etc in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 66 | Ground Floor |
| 67 | First Floor |
| 68 | Second Floor |
| 69 | Providing 16-18mm thick and above 0.40 Sqm size granite tile cladding of approved quality, colour and size in walls in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the granite including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 70 | Ground Floor |
| 71 | First Floor |
| 72 | Second Floor |
| 73 | Providing edge moulding and groove cutting of required numbers as per drawing and design to 18 mm thick granite stone counters, steps, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per direction of Engineer-in-Charge. |
| 74 | Supplying, fitting and fixing in position 25mm thick cement concrete tile of approved make, quality, colour and size in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge |
| 75 | Supplying, fitting and fixing of M.S window grills made out of ms flats, pipes, square bar etc (as per I.S. specification and as per approved drawings) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. |
| 76 | Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect. |
| 77 | Providing and fixing in position well dressed, naturally seasoned sal wood rebated frames of size 125mmx63mm to doors including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge |
| 78 | Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, stainless steel fittings like hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 79 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 80 | 75mm x 50mm |
| 81 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 82 | 30mm thick |
| 83 | ALUMINIUM SLIDING SYSTEM WINDOW WITH MESH PANEL :- Providing and fixing Anodized System Aluminum Sliding glazed windows suitable for 1.6 KPA wind load with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two/three glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third/fourth track. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly. All glasses will be 5 mm clear toughened.The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 1600 Pa. |
| 84 | 3 Track 2 Glass panel 1 Mesh Panel |
| 85 | Aluminum Fixed / Top hung Ventilators: Providing and fixing Anodized System Aluminum top hung windows of TOSTEM / NCL ALLURO / ALUMIL make using easy clean hinges with fixed part having cut outs on glass for exhaust provision, suitable for 1.6 KPA wind load. The extruded aluminium sections should be made from Grade 6063- T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm. All glasses will be 5 mm frosted toughened. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 1600 Pa. |
| 86 | Fixed with exhaust provision / Top hung Ventilator |
| 87 | DOUBLE LEAF ALUMINUM OPENABLE GLASS DOOR :- Providing and fixing Anodized System Aluminum double leaf openable glass door made of suitable for 1.6 KPA wind load with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly. All glasses will be 5 mm clear toughened.The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 1600 Pa. |
| 88 | Design, Supply, Fabrication,Erection, Assembl and Installation of Semi-Unitised Structural Glazing / Curtain Glazing System with frame work (all four sides of glass held by structural sealant) with open joints for linear as well as curvilinear portions of the building for all heights and levels including Mullions, Transoms, Trims, etc. The Frame Work for Structural Glazing shall be of Aluminum Extruded Tubular and other aluminum sections must be produced from primary ingots of Jindal/Hindalco/Alom/ Bhoruka or equivalent make, as per grade 6063 T5 or T6 as per B.S.1474 conforming to ASTM : GS11A. The aluminum extrusions to be duly powder coated with min 50-60 micron thick as per approved shade and having dimension – 150 mm x 64mm x 2.5 mm as Mullion and 64 x 50 x 2.0.mm as Transom with appropriate Z Section / Pressure & Cover Plates. The Aluminium Frame to be fixed to the existing RCC columns / Beams by using GI/ MS / hot dip Galvanised / Aluminum alloys Brackets of required sizes and profiles with MS/HD Nuts & Bolts, or to be welded to the MS Back up Frame if required ( MS back up frames to be paid separately if require by Design) to accommodate 3 dimensional movement for achieving perfect vertically and proper fixing of structural glazing system with the RCC / Masonry/Bolts , nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316 Mechanical / Chemical Anchor Fasteners of Hilti/Fischer or equivalent make of the required capacity and in required numbers along with making provision for drainage of moisture / water that enters the curtain glazing system to make it watertight having Glazed façade of 24.mm DGU Glass ( 6mm Heat Strengthened Toughened Reflective Glass on surface #1 + 12.mmSpacer Bar Air Gap + 6.mm Clear Toughened Glass on surface-#2) of approved shade and Saint Gobain/ AIS or equivalent make with panel size of 1500(H) x900 (W) , the Glass to be fixed to aluminum Frame Section by using Structural silicon Sealant and weather silicon sealant of Dow Corning / Wackar or equivalent make to make the system water & air tight by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom(If required), etc. complete as per approved drawings of Architect and as per direction of Engineer In charge. EXTRA for openable including providing and fixing at site all accessories and hardware for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the drawings |
| 89 | Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. |
| 90 | Second Floor |
| 91 | Providing 20mm. average thick grading plaster with cement mortar of mix (1:4) in all floors at all height with portland slag cement on top of roof slab after chipping and chiseling the same and cleaning the entire surface with wire brush, finished smooth to proper slope and gradient with watering and curing etc. complete including cost, coveyannce, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 92 | Second Floor |
| 93 | Providing and applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836. with Adhesion to concrete : >1N/mm2 for waterproofing structures like roof slabs, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels. |
| 94 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after scraping, cleaning and racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 95 | Ground Floor |
| 96 | First Floor |
| 97 | Second Floor |
| 98 | Providing 16mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after scraping, cleaning and racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 99 | Ground Floor |
| 100 | First Floor |
| 101 | Second Floor |
| 102 | Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary, scraping, cleaning and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 103 | Ground Floor |
| 104 | First Floor |
| 105 | Second Floor |
| 106 | Finishing inside wall surface with cement based wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. |
| 107 | Ground Floor |
| 108 | First Floor |
| 109 | Second Floor |
| 110 | Finishing outside wall surface with cement based wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. |
| 111 | Ground Floor |
| 112 | First Floor |
| 113 | Second Floor |
| 114 | Providing and painting internal surface two coats with plastic emulsion paint over a coat of water based primer of approved quality and approved shade in all floors at all height by making the surface of wall smooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 115 | Ground Floor |
| 116 | First Floor |
| 117 | Second Floor |
| 118 | Painting to external surface of building with two coats of weather coat over a coat of water based primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 119 | Ground Floor |
| 120 | First Floor |
| 121 | Second Floor |
| 122 | Providing and painting two coats with synthetic enamel paint over a coat of zinc oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. |
| 123 | Ground Floor |
| 124 | First Floor |
| 125 | Second Floor |
| 126 | Providing and applying Exterior Colourless silicone water repellent coating of Nitocote SN522 evenly by spraying or brushing. Ensure an even coat over the entire surface. Porous surface should be well saturated with a two coat application Complete as per the manufacturer’s specification. Nitocote SN522 penetrates into concrete for a minimum depth of penetration of 2mm & complies with BS 6477-92 Class A and Class B as silicone - based water repellent. |
| 127 | Ground Floor |
| 128 | First Floor |
| 129 | Second Floor |
| 130 | Dry fixing of the Clay Roof tile Design & fixing of Portuguese or flexa roof tile of Wienerberger (Red & Antique) or BMI MONIER with suitable support with either Cement battons with dimensions 2.5 inch length * 2 inch or MS or Aluminum purlins for the tile to rest on the given structure. Purlins should be placed as per the Wienerberger Specifications for that particular tile. In case of using MS or Aluminum Purlis (Thickness of minimum 1.5mm), every 3rd tile should be screwed with the self Tapping screw to the purlin to ensure the tile wont uplift in case of heavy windloads. (Consider 12.5 tiles required Per SqM excluding Wastage) On fixing of first tile from the bottom, it need to be taken out by 2-3 inches & the tiles should be placed one over the other as per the interlocking of the tile as per Wienerberger methods. Necessary Flashings (for abutments) & other RSC (Ridge Tree, Ridge Rolls & valley sheets) material should be used to make the entire roof Water proof. Prices should include all the necessary components & laying charges on SqM basis depending on the design & requirements of the roof given by the Architect |
| 131 | COMPOUND WALL & GATE |
| 132 | Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including ordinary soil, hard/gravelly soil and stony earth mixed with stone and boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 133 | Filling foundation trenches and plinth with excavated earth (excluding rock) including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 134 | Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for complete the work as per direction of the Engineer-in-charge. |
| 135 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for complete the work as per direction of Engineer-in-charge. |
| 136 | Providing, lifting, hoisting and laying Reinforced cement concrete work of M-25 grade having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for complete the work in all respects as per drawing, design and direction of Engineer-in-charge. (But excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.) |
| 137 | Foundation |
| 138 | Plinth Beam |
| 139 | Beam & Column |
| 140 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) |
| 141 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after scraping, cleaning and racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 142 | Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary, scraping, cleaning and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 143 | Supplying, fitting and fixing of M.S compound wall grills made out of ms flats, pipes, square bar etc (as per I.S. specification and as per approved drawings) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. |
| 144 | Supplying, fitting and fixing of M.S decorative grill gate made out of ms flats, pipes, square bar etc including brass mouldings (as per I.S. specification and as per approved drawings) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. |
| 145 | Painting to external surface of building with two coats of weather coat over a coat of water based primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 146 | Providing and painting two coats with synthetic enamel paint over a coat of zinc oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. |
| 147 | Providing and applying Exterior Colourless silicone water repellent coating of Nitocote SN522 evenly by spraying or brushing. Ensure an even coat over the entire surface. Porous surface should be well saturated with a two coat application Complete as per the manufacturer’s specification. Nitocote SN522 penetrates into concrete for a minimum depth of penetration of 2mm & complies with BS 6477-92 Class A and Class B as silicone - based water repellent. |
| 148 | Dismantling brick or stone masonry in cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant. |
| 149 | Providing scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge. |
| 150 | Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 151 | APPROACH ROAD, PARKING |
| 152 | Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including ordinary soil, hard/gravelly soil and stony earth mixed with stone and boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 153 | Filling foundation trenches and plinth with excavated earth (excluding rock) including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 154 | Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 155 | Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for complete the work as per direction of the Engineer-in-charge. |
| 156 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for complete the work as per direction of Engineer-in-charge. |
| 157 | Brick work in foundation and plinth with flyash bricks of size 25cmx12cmx8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 158 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after scraping, cleaning and racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 159 | Painting to external surface of building with two coats of weather coat over a coat of water based primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 160 | Rolling & compacting to sub grade or formation loosening by cutting earth for 15cm below the sub grade including watering and compacting in layers by PRR, cost & conveyance of required quantity of water, cost of all labour sundries, T & P etc. required for the work to complete in all respect as per specification and direction of Engineer-in-charge. |
| 161 | Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision) etc complete as per direction of Engineer-in-charge. |
| 162 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works |
| 163 | Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 164 | Supplying and fixing of precast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984 |
| 165 | Providing and painting two coats with synthetic enamel paint over a coat of zinc oxide primer of approved quality and approved shade confirmming to ISI on brick/rcc work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. |
| 166 | SITE DEVELOPMENT / FILLING |
| 167 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 168 | Supplying and filling with river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and compaction with rollers and dozer etc including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for complete the work as per direction of the Engineer-in-charge. |
| 169 | Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction & Clause 305 of MoSRT&H Specifications for Road & Bridge works (5th Revision) |
| 170 | Felling trees of 30 to 60cm girth (measured at a height of 1 m above ground level) and relocating the same inside the premises, including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. |
| 171 | LANDSCAPING & HORTICULTURE WORKS |
| 172 | Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of land manure before and after flooding trench with water (excluding the cost of imported earth, sludge or manure). |
| 173 | Supplying and stacking of good earth at site (Earth measured in stacks will be reduced by 20% for payment) with all lead and lift. |
| 174 | Supplying and stacking sludge at site (sludge measured in stacks will be reduced by 8% for payment) with all lead and lift. |
| 175 | Supplying and stacking at site dump manure from dumping place nearest to site of work. (manure in stack will be reduced by 8% for payment) with all lead and lift. |
| 176 | Screened through sieve of I.S designation 20 mm. |
| 177 | Screened through sieve of I.S designation 16 mm. |
| 178 | Screened through sieve of I.S designation 4.75 mm. |
| 179 | Rough dressing the trenched ground including breaking clods. |
| 180 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of up rooted vegetation with all lead and lift. |
| 181 | Fine dressing the trenched ground. |
| 182 | Spreading of sludge, dump manure or land good earth in required thickness. (Cost of sludge, dump manure or/and good earth to be paid separately). |
| 183 | Mixing earth and sludge or manure in proportion specified or directed. |
| 184 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge |
| 185 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 186 | Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludge shall be paid for separately). |
| 187 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) |
| 188 | Holes 60 cm dia, and 60 cm deep |
| 189 | Holes 45 cm dia, and 45 cm deep |
| 190 | Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. |
| 191 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm |
| 192 | Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height. |
| 193 | Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. |
| 194 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. |
| 195 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) |
| 196 | Trees Plant |
| 197 | Shrubs Plant |
| 198 | Hedge Plant |
| 199 | Providing and displaying of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 200 | Providing and displaying of Aglaonema Snow-White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot . (Specimen Plant) & as per direction of the officer-in-charge. |
| 201 | Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 202 | Providing and displaying of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 203 | Providing and displaying of Croton Baby Golden plant (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot. as per direction of the officer-incharge. |
| 204 | Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranched, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 205 | Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot . & as per direction of the officer-in-charge. |
| 206 | Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 207 | Providing and Displaying plants Cladium Hybrid variety 3 to 4 plants in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer incharge. |
| 208 | Providing and Displaying plants Cosmos well developed fresh & healthy 20 to 25 cm ht. attractive colours multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 209 | Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. |
| 210 | Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. |
| 211 | Providing and Displaying Acalypha green plant well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. |
| 212 | Providing and Displaying Bamboo Buddha vally variety with umbrella shape plant having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant as per direction of the officer-in-charge. |
| 213 | Providing and Displaying Fishtail palm plant well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen plant in 35 cm Cement Pot as per direction of the officer-in-charge. |
| 214 | Providing and Displaying Foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. |
| 215 | Supply and stacking of Acacia auriculiformis plant of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. |
| 216 | Supply and stacking of Adansonia digitata (kalp vricksh) plantof ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. |
| 217 | Supply and stacking of Azadirachta indica ( Neem ) plant of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 218 | Supply and stacking of Bottle palm plant of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags. |
| 219 | Supply and stacking of Casuarina equisetifolia plant of height 150-165 cm in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 220 | Supply and stacking of Ficus nuda plant of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge. |
| 221 | Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v |
| 222 | Supply and stacking of plant Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 223 | Supply and stacking of plant Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge. |
| 224 | Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 225 | Supply and stacking of plant Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. |
| 226 | Supply and stacking of plant Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. |
| 227 | Supply and stacking of Jasminum humile (Yellow) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 228 | Providing and fixing overhead type sprinkler system with self closing valve type 25mm X 20mm with self closing spring made up of alluminium alloy and brass fittings including cost of all materials, labour, T & P etc complete as per direction of Engineer-in-charge. |
| 229 | Supplying all materials, labour, T&P and fixing 15mm dia CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. Make: Jaquar/Grohe/Johnson/Roca |
| 230 | Supplying all materials, labours, T&P and fitting and fixing of the 20mm dia CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) |
| 231 | provision of mentainance of the above landscaping work |
| 232 | first year - @10% of Rs. 575780.34 (Sl. 87 to 116) |
| 233 | Second Year @7.5% of Rs. 575780.34 (Sl. 87 to 116) |
| 234 | Third Year @ 5% of Rs. 575780.34 (Sl. 87 to 116) |
| 235 | INTERIOR FURNISHING |
| 236 | Providing and fixing in position false ceiling Gypsum board ceiling as per the pattern and design at two levels with tray pattern and cornice to have diffused lighting arrangement made from 12.5mm tk Fire line Gypsum board fixed with main G.I frame channels all along the wall shall be provided. The frame work to be suspended with G.I flats or adjustable M.S rod from intermediate channels using nuts and bolts as recommended using rawls plugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm. Arrangements are to be made to accommodate light fixtures, curtain rails by forming recessed channels which shall be done with jointing compound and paper tape .Ceiling to be leveled and free from cracks . Items to be completed in all respect to the architect's approval .Openings to be made in the ceiling as per architect 's approval to accommodate lighting fixtures. Opening in the ceiling are to be tied with perimeter channel complete with the cost of all labour and material i/c painting with acrylic emulsion painting of two coats with primer coat . |
| 237 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DuneSupreme (Bevelled Tegular) Edge Tiles With Armstrong 15mmExposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 44%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68Kgs/M2 & minimum pull out strength of 100 Kgs.. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 30 year warranty.To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. |
| 238 | Providing and fixing in position false ceiling Waterproof Gypsum board ceiling as per the pattern and design at two levels with tray pattern and cornice to have diffused lighting arrangement made from 12.5mm tk Waterproof Gypsum board fixed with main G.I frame channels all along the wall shall be provided. The frame work to be suspended with G.I flats or adjustable M.S rod from intermediate channels using nuts and bolts as recommended using rawls plugs 12.5 mm dia bolts and soft cleat 27mmx 37mmx25mm. Arrangements are to be made to accommodate light fixtures, curtain rails by forming recessed channels which shall be done with jointing compound and paper tape .Ceiling to be leveled and free from cracks . Items to be completed in all respect to the architect's approval .Openings to be made in the ceiling as per architect 's approval to accommodate lighting fixtures. Opening in the ceiling are to be tied with perimeter channel complete with the cost of all labour and material i/c painting with acrylic emulsion painting of two coats with primer coat . |
| 239 | Providing & fixing horizontal level suspended ceiling comprising of Knauf Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063 T5. The baffle blade shall be in size of 100x25x3600mm in powder coated to Woodgrain/Plain finish (Red Oak, Cherry, Black / White). The baffle shall be electrostatically polyester powder coated to a coating thickness of 60-80 micron. The powder coating shall pass Salt Spray Test for 750 Hours as per ASTM B117, QUV –A Test for 1000hours as per ASTM G-154 – (Cycle – 1) and Humidthickity test for 1000hours as per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The shade variation within a manufacturing batch shall be delta E<1 using Excite/BYK Gardner instrument and gloss level 25±5% at 60˚ as per ASTM D523 (Not applicable of Wood Grain Shade). The baffle blade shall be suspended using Slotted U-profile of 20 x 30 x 3700mm (Thk-1.5mm) having slots in module of 25mm to keep baffles at an on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. |
| 240 | Providing, fitting & fixing of premoulded decorative corner beading of GRC. Having cross sectional dimension 112x80mm and fixing the same by providing PVC plug, screw, cornice adhesive, fevicol etc complete in all respect as per direction of Engineer-in-charge. |
| 241 | Providing and putting in position column/wall paneling as per approved drawing made out of 12mm thick BWR ply over framing with 1mm thick approved colour laminate including cost of all materials, labours, T&P etc required for the work complete in all respect as per the direction of the engineer-in-charge. |
| 242 | Providing, fitting and fixing of WPC Fluted Louvers of Lumberlife make or equivalent make as wall Paneling over required base frame of aluminium/ply including cost of all materials, labour, T&P etc required to complete the work as per drawing, design and direction of Engineer-in-charge. |
| 243 | Supplying fitting and fixing in position customised wallpaper of dreamz / flow / icon of Marshall or equivalent make as per approved pattern and size to the internal surface of wall or partition including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 244 | Providing and fixing Vertical/Roller blinds of MAC/VISTA brand as per the approved shade and design alongwith all the accessories including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 245 | Supplying and fixing Photo Frame of natural acrylic Art of approved size including cost of all materials, labour, T&P etc required to complete the work as per drawing, design and direction of Engineer-in-charge. |
| 246 | Providing partition of full height partly Glazed partition for in other area as per drawing with Aluminium frame 50x25 mm with 1.5mm thickness intermediates, verticals and horizontal (600mmx600mm) as shown in drawing and shall be fixed to floor, ceiling, walls etc. with suitable size of screws, plugs including making good to damages, with the cost of applying a coat of primer to exposed faces of the timber and fixing 6 mm thk .BWR ply both sides of approved make and quality confirming to IS 710 over the frame work with screws at adequate intervals and fixing 1.0 mm thk Laminate both sides on ply (suede finish) with adhesive and 12mm thick glass with 3mm film etching to be fixed with Dorma patch fittings at glazed portion including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. (Payment will be made as per height below the false ceiling) |
| 247 | Providing partition of low height (1200mm) partition as per drawing with Aluminium frame 50x25 mm with 1.5mm thickness intermediates, verticals and horizontal (600mmx600mm) as shown in drawing, and shall be fixed to floor ceiling, walls etc. with suitable size of screws, plugs including making good to all damages, with the cost of applying one coat of primer to exposed faces of the timber and fixing 6mm thk. water proof ply over the frame work on both sides with screws at adequate intervals and fixing 1.0mm thick laminates over it on both sides of approved colour and make to partition ,paneling as per drawing and fixing with suitable adhesive and 12mm thick glass with 3mm film etching to be fixed with Dorma patch fittings, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of EIC. |
| 248 | DOUBLE LEAF ALUMINUM OPENABLE GLASS DOOR :- Providing and fixing Anodized System Aluminum double leaf openable glass door made of suitable for 1.6 KPA wind load with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly. All glasses will be 5 mm clear toughened.The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 1600 Pa. |
| 249 | Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, stainless steel fittings like hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 250 | FURNITURE |
| 251 | Officer's Tables |
| 252 | T1-1800x750x750-Supply of table should be made out of 25mm thick HDHMR Board with approve shade of laminate hot pressed on to it with D3 grade glue. The table should have two nos of leg 25mm that continues upto the floor and the leg should be connect by a modesty panel of 18mm thickness. All esposed edges should be edgebanded mechinically with PVC (Rehau/Dolkan) edgebanding tape and hotmelt glue. It should have knowndown arragement of fitting. All hardwares should be of Hettich/Ebco/Hafele make. The table should be provided with inbuilt storage of size-380X450 at left or right as per orientation. All boring should be in CNC precision. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 253 | T2-1500x750x750-Supply of table should be made out of 25mm thick HDHMR Board with approve shade of laminate hot pressed on to it with D3 grade glue. The table should have two nos of leg 25mm that continues upto the floor and the leg should be connect by a modesty panel of 18mm thickness. All esposed edges should be edgebanded mechinically with PVC (Rehau/Dolkan) edgebanding tape and hotmelt glue. It should have knowndown arragement of fitting. All hardwares should be of Hettich/Ebco/Hafele make. All boring should be in CNC precision. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 254 | T3-1500x1500x750-Supplying of modular work station with table top and gable ends made out of 25mm prelaminated board having provision to fix the top with the gable ends by knock down fitting arrangement. The same should be fixed to the modular partition of 75mm thick made of CRCA grade frame with aluminium trim of 1200mm height, having insert based tile system having cable raceway and skirting. The tiles are made of 9mm thick prelaminated board. It should be provided with a mobile cpu trolley and proper cable management. All exposed edges should be mechanically edgebanded by PVC tape and hotmelt glue. It should be provided with one mobile storage-unit with one drawer and a shutter in the size 400mm x 450mm x 620mm made out of 18mm |
| 255 | Library room table-1500x900x750-Supply of table should be made out of 25mm thick HDHMR Board with approve shade of laminate hot pressed on to it with D3 grade glue. The table should have two nos of leg 25mm that continues upto the floor and the leg should be connect by a modesty panel of 18mm thickness. All esposed edges should be edgebanded mechinically with PVC (Rehau/Dolkan) edgebanding tape and hotmelt glue. It should have knowndown arragement of fitting. All hardwares should be of Hettich/Ebco/ Hafele make. All boring should be in CNC precision. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 256 | Supplying and fixing of Conference Table of size 6500x1500x750mm (Vineer finish) made out of calibrated BWP plywood with apporved shade of 1mm thick flitches Veener. It should be provided with leg structure made out 25mm thick ply & 32mm ply finish with Veneer for the top .It should have provision for necessary power (POPUP of Box). All exposed edges should be mechanicllay edge banded by matching 1mm thick veneer edge banding with hot melt gule (Jowat / Henkel). All pressing venner on to the ply has be executed mechanically by hot press and polymersied D3 adhesive (Kleiberit/ Jowat / Henkel). The non exposed area will be cover up by 0.8mm balancer laminate. The same furniture will be finished with two coats of sealer followed by one top coat in PU. The PU laquer form Sirca / Teknovance (Italy). It should have a knockdown arrangement of fitting. All hardware fitting will be Hettich / Hafele-Blum. Make by Vibe by Transform Furnitures Pvt. Ltd. |
| 257 | Reception table-4700x600x750-Supply of table should be made out of 25mm thick HDHMR Board with approve shade of laminate hot pressed on to it with D3 grade glue. The table should have two nos of leg 25mm that continues upto the floor and the leg should be connect by a modesty panel of 18mm thickness. All esposed edges should be edgebanded mechinically with PVC (Rehau/Dolkan) edgebanding tape and hotmelt glue. It should have knowndown arragement of fitting. All hardwares should be of Hettich/Ebco/ Hafele make. All boring should be in CNC precision. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 258 | Supplying of credenza made out of 18mm perlam with two side panel, one bottom panel & a back panel (9mm). It should have two drawer on top & two no of openable shutters on the bottom. It should be a 25 mm thick edgebanding top. The shutter should be fixed on to the cabinet by auto shut hinges. All exposed edges be mechanically edge bended with PVC edge binding tape (REHAU/ Dolkan) & hot melt glue. It should have knockdown arrangement for fitting. All booring has to be done on CNC for precession of fitting. All hardware fittings will be of Hettich/Ebco/Hafele make. It should be provided with plinth adjusters on the bottom. |
| 259 | Supplying of Storage of required size madeout of 18mm HDHMR with approve shade of laminate with expose side & inside 0.8mm balancer laminate. All laminates has to be hot pressed with D3 glue (Jowat/ Henkel / Kleiberit Glue). The said storage should have two sidepanels & a bottom Panel & 25mm thick a Top. It should be provided with a backpanel madeout of 6mm thickness.It should have multiple shutters according to the length. The storage should be provided with shutters mounted on to the cabinets by full overlay auto shut Hinges. It should be provided with internal sleves for storage. It should be provided with handles. All exposed edges should be mechanically edgebanded by PVC tape (Rehau & Dolkan) and hotmelt glue. It should have knockdown arrengement for fitting. It should be provided with plinth adjuster on the bottom. All hardware fittings will be of Hettich / Hafele make. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 260 | Supplying and fixing of wardrobe of required height. madeout of 16mm calibrated BWP plywood with approve shade of laminate with expose side & inside 0.8mm balancer laminate. All laminates has to be hot pressed with D3 glue (Jowat/ Henkel / Kleiberit Glue). The said wardrobe should have two sidepanels & a bottom Panel & a Top. It should be provided with a backpanel madeout of 6mm thickness. It should have multiple shutters according to the length. The wardrobe should be provided with shutters mounted on to the cabinets by full overlay auto shut Hinges. It should be provided with one side internal sleves for storage & other side for hanging rail. It should be provided with handles. All exposed edges should be mechanically edgebanded by PVC tape (Rehau & Dolkan) and hotmelt glue. It should have knockdown arrengement for fitting. It should be provided with plinth adjuster on the bottom. All hardware fittings will be of Hettich / Hafele make. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 261 | Supplying and fixing of TV Panel with Ledge of approved size made out of 16mm calibrated BWP Plywood with 1mm approved shade Laminate. All pressing Laminate on to the ply has be executed mechanically hot press with polymersied D3 adhesive (Kleiberit/ Jowat / Henkel). The non exposed area will be cover up by 0.8mm balancer laminates. All exposed edges should be mechanically edgebanded with PVC tape (Rehau/Dolkan) & hot melt glue (Jowat/ Henkel & kleiberit). It should have necessry provision for cable & date. The design of the TV Panel with Ledge.Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 262 | Supplying & Fixing of pantry unit madeout of 16mm calibrated BWP plywood with approve shade of laminate with expose side & inside 0.8mm balancer laminate. All laminates has to be hot pressed with D3 glue (Jowat/ Henkel / Kleiberit Glue). The said storage should have two sidepanels & a bottom Panel. The top will be moulded granite top. It should be provided with a backpanel madeout of 6mm thickness.The cabinet should be provided with two openable shutters mounted with the cabinet by full overlay hinges. The shutter has to be laminated with 1mm thick lamination hot press on to it. All expose edges should be mechanically edgebanding PVC edgebanded tape (Rehau/ Dolkan) hot melt gule. It should have a knockdown arrangement of fitting. All booring has to be done an CNC for precession of fitting. The hardwares will be of Hettich / Olive make. The carcass will be provided with suede finish edgebanded shutters. All Accessories are in SS. Make by Vibe By Transform Furnitures Pvt. Ltd. |
| 263 | Supplying and placing of Three Seater Sofa, Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric, also available in Rich Black Leatherite of Pisa (company-1130) FUPISA3X701S |
| 264 | Supplying and placing of Two Seater Sofa, Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric, also available in Rich Black Leatherite of Pisa (company-1130) FUPISA2X701S |
| 265 | Supplying and placing of Single Seater Sofa, Ergonomic Back Support, Soft Touch Fine Finish, Durable Fabric, also available in Rich Black Leatherite of Pisa (company-1130) FUPISA1X701S |
| 266 | Centre Table |
| 267 | Supplying and fixing of black top center table of SS understructure. FUPISACT030S (company-5000) Toughened Glass 12mm Thick. Make-Godrej/Geeken/Featherlite size 1200x600mm |
| 268 | Supplying and fixing of black top center table of SS understructure. FUPISAST030S (company-5000) Toughened Glass 12mm Thick. Make-Godrej/Geeken/Featherlite size 600x600mm |
| 269 | Chair |
| 270 | Supplying and placing of Officer's Chair-1 KAREENA NXT (Company - 1130) FU9P02AX13RSXXXX - Mid Back HB & MB-KTS Mech 4 Position Locking, Soft touch PU Arms, Chrome-Plated arms & Pedestal, Adj Backrest, Conf HB & MB-Fixed arms,Fixed Backrest, Black Leatherette, Voila Fabric (V01 - V17) |
| 271 | Supplying and placing of Officer's Chair-2 BEAT (LC)(Company - 1130) FUBT02AX13RSXXEN - Mid Back W/O Seat Slide KTS Mech 4 Position Locking,Die Cast polished aluminium Pedestal, Chrome-platting element in PU-up-down adj arms & Ht. Adj Backrest Leatherette:- 13R (Black) Only |
| 272 | Supplying and placing of work station's Chair BRAVO (Company - 1130) FU9U02RGV01SXXXX - Mid Back Centre tilt synchro, 3 Pos Lock, Nylon Pedestal, PP Fixed Arms, Nylon Pedestal |
| 273 | Supplying and placing of Library room's Chair OXBO (Company - 1130) FU7501RG151SXXEN - High Back CT Mech Upright Position Locking, Fixed PP Arms, Nylon Ped |
| 274 | Supplying and placing of Conference room's Chair PREMIER (Company - 1120) FU7101RXV01SXXXX - High Back Centre Tilt Mechanism, Powder Coated Metal Pedestal, PP Fixed Arms |
| 275 | Supplying and placing of Officer Visitor's Chair BEAT (LC)(Company - 1130) FUBT12TX13RSXXEN - Visitor MS Powder Coated U/S, Fixed Arm Rest |
| 276 | PH WORKS |
| 277 | Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European coupled water closet of Jaquar make having cat no CNS-WHT-755S220SPPZ or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. |
| 278 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware under counter wash hand basin of approved size of Jaquar make having cat no CNS-WHT-705 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. |
| 279 | Supplying and fixing urinal of Jaquar make having cat no URS-WHT-13261H or equivalent type of approved make including all fittings like 450mm long connection pipe of Jaquar make having cat no ALD 803B, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. |
| 280 | Providing and Fixing of Greenlam Sturdo UMP Model A Urinal Partitions made of 12 mm thick Compact Laminates having total height of 1195 mm and depth of 450 mm with SS 316 grade L clamp and scews for fixing.. |
| 281 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-FLP 5053PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 282 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia pillar cock of Jaquar Cat. No.-FLP 5011PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 283 | Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLP 5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 284 | Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 563 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 285 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24\\" of Jaquar Cat. No.-ACN-1111SM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 286 | Supplying all materials, labour, T&P and fixing standard sized CP towel ring square of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 287 | Supplying all materials, labour, T&P and fixing standard sized liquid soap dispenser of Jaquar Cat. No.-ACN 1135N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 288 | Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 289 | Supplying all materials, labour, T&P and fixing standard sized CP toilet paper holder of Jaquar cat. No.-ACN1153S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 290 | Supplying all materials, labour, T&P and fixing standard sized CP robe hook of Jaquar Cat. No.-ACN 1191N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 291 | Providing all materials, labour,T&P and fittings and fixing of urinal valve auto closing system with built in control cock Jaquar Cat. No.-PRS 077 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 292 | Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. |
| 293 | Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 294 | Supplying all material, labour T&P and fixtures for providing and fixing of stain less steel sink with drainboard of Nirali Grace plain 610x510mm or equivalent type of approved make with its components like 32mm CP waste of cat no ALD 705, 40mm waste pipe etc, including all requisite fixing materials complete as per the PH specification and direction of Engineer-in-charge |
| 295 | Supplying all materials, labour, T&P and fixing standard sized sink cock of Jaquar Cat. No.-FLP 5347PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 296 | Providing and fixing 6L step can in stainless steel of Kohler make having cat no K-17531T-ST etc complete as per PH specification and direction of the engineer in charge |
| 297 | Providing and fixing fragrance disperser of Euronics make having cat no EA44 etc complete as per PH specification and direction of the engineer in charge |
| 298 | Providing and fixing Floor drain in polished chrome with hole of Kohler make having cat no K-7275IN-CP for floor/nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 299 | Providing and fixing circular type stainless steel grating with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 300 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) |
| 301 | 15 mm dia |
| 302 | 20 mm dia |
| 303 | 25 mm dia |
| 304 | 32 mm dia |
| 305 | Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80 confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) |
| 306 | 40mm dia |
| 307 | 50mm dia |
| 308 | Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. |
| 309 | 75mm dia |
| 310 | 110mm dia |
| 311 | Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 312 | 110mm dia Single Junction with door |
| 313 | 110mm dia Double Junction with door |
| 314 | 110mm dia Cowl |
| 315 | 110mm dia Plain Bend |
| 316 | 110mm dia SWR Door Bend |
| 317 | 125mm x 110mm Gulley Trap |
| 318 | 110mm dia Tee with door |
| 319 | 110mm dia Single Junction without door |
| 320 | 110mm dia Socket plug |
| 321 | 110mm dia Pipe clip |
| 322 | 110mm dia Coupler |
| 323 | 75mm dia Plain Bend |
| 324 | Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. |
| 325 | 25mm Dia |
| 326 | 32mm Dia |
| 327 | 40mm Dia |
| 328 | 50mm Dia |
| 329 | Supplying all materials, labour, T&P and fitting and fixing of UPVC NRV valve of 50mm Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 330 | Supplying all materials, labour, T&P and fitting and fixing of double air valve of 50mm Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 331 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 332 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 333 | Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. |
| 334 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 335 | Supplying all materials, labour, T&P and fittings and fixing of 1000 ltr capasity Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) |
| 336 | Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth UPVC gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 20mm & 10mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. |
| 337 | Supplying all materials, labour, T&P and fixing grab bar of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 338 | Grab Bar Vertical swing,white (JAQUAR -WAC-WHT-860800/Equivalent) |
| 339 | Grab Bar 692 mm long,white (JAQUAR -WAC-WHT-BR0600/Equivalent) |
| 340 | Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge. |
| 341 | Extra for every additional depth of 0.10mtr or part there of inspection chamber as of previous item of size 900x800mm from 450mm to 900mm depth (data for 0.10 mtr per each) |
| 342 | Supplying all materials,labours,T&P and constructing inspection chamber/manhole of 1200mmx 900mmx900mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm of 150mm thick and flyash brickwork in cement mortar (1:4) in foundation and plinth, 150mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials all complete as per the drawing, design and direction of Engineer-in-charge. |
| 343 | Extra for every additional depth of 0.10mtr or part there of inspection chamber as of previous item of size 1200x900mm from 900mm to 2.5mtr depth (data for 0.10 mtr per each) |
| 344 | Supplying all materials, labour, T&P and laying of UPVC SWR pipes & fittings of approved make confirming to IS-13592,in trenches as sewer line including jointing, laying in proper gradient etc all complete as per the PH specification and direction of the Engineer-in-charge. |
| 345 | 100mm Dia |
| 346 | 150mm Dia |
| 347 | Supplying all materials, labour, T&P and necessary materials towards laying of RCC NP2 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all complete as per direction of Engineer-in-charge. |
| 348 | 150mm Dia |
| 349 | 200mm Dia |
| 350 | Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification (A1-Type Bedding) |
| 351 | 150mm Dia |
| 352 | 200mm Dia |
| 353 | Supply of all labour, T&P towards excavation of sewage pipe line trench in all kinds of soil within 50 mtr initial lead and 1.5 mtr initial lift including rough dressing and breaching of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30mtr in depth as per design and drawing and as per direction of Engineer-in-charge. |
| 354 | Supply of all labour, T&P towards excavation of sewage pipe line trench in all kinds of soil within 50 mtr initial lead and beyond 1.5 mtr initial lift including rough dressing and breaching of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30mtr in depth as per design and drawing and as per direction of Engineer-in-charge. |
| 355 | Supplying and filling the pipeline trench with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 356 | Filling pipeline trench with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 357 | Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 358 | Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for complete the work as per direction of Engineer-in-charge. |
| 359 | Providing and laying plain cement concrete of (1:2:4) for mending of sewer line trench using 12 mm. Size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required for the work etc complete as per the instruction of the Engineer-in-Charge. |
| 360 | Providing, lifting, hoisting and laying Reinforced cement concrete work of M-25 grade having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for complete the work in all respects as per drawing, design and direction of Engineer-in-charge. (But excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills.) |
| 361 | Foundation |
| 362 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) |
| 363 | Brick work in foundation and plinth with flyash bricks of size 25cmx12cmx8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 364 | Providing 12mm. thick cement plaster with cement mortar of mix (1:4) in all floors with Portland slag cement (PSC) and with screened and washed sharp sand for mortar with neat cement punning finished smooth to brick/RCC walls after racking out the joints including watering and curing complete with cost, conveyance, loading and unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P, scaffolding required for the work etc. complete in all respect as per the direction of Engineer-in-Charge. |
| 365 | Providing 16mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after scraping, cleaning and racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 366 | Supplying all materials, labour, T&P and providing , fitting & fixing 100mm x100mm x100 mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge. |
| 367 | Supplying all materials ,labour, T&P and making MS Step Iron in 20mm diameter MS steel bars & fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 368 | Supplying and fixing 900mm dia SFRC cover without frame for manhole including cost of all materials, T&P, labour etc complete as per direction of Engineer-in-charge. |
| 369 | Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty etc all complete as per approved specification and direction of Engineer-in-charge. |
| 370 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 371 | Rocky terrain with boulder formation for 300m depth |
| 372 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). |
| 373 | Supplying 200mm polyvinyl chloride pipes as per ASTM-D-1785-89 schedule 80 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and internal threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes,pipes shall be provided with a groove at the male thread to accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 374 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 375 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 376 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 377 | Supplying all materials, labours, T&P and fitting and fixing of the 80mm dia of UPVC pipe (Sch-80) confirming to ASTM D1785 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) |
| 378 | Supply, installation, testing and commisioning of vertical submerssible pump set of approved make having discharge 20m3 per hour and 60mtr head including installation of pump set with wire ropes, clamps etc inside the borewell, etc complete as per the Direction of Engineer-in-charge. (Duty of pump to be decided depending upon yeild of the borewell) |
| 379 | Supply, installation, testing and commisioning of automatic star delta control panel suitable for 10HP pumpset including MS box fitted with main switch ,contactor, single phasing preventer, timer, selector switch, voltmetre, ammeter etc and connection with motor inside the borewell complete as per the Direction of Engineer-in-charge. (Excluding power supply and flat cable for connection with motor) |
| 380 | Protection to the Borewell with CC base |
| 381 | 3 core 6.0sqmm copper flat cable |
| 382 | Bore Cap |
| 383 | Clamp |
| 384 | Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including ordinary soil, hard/gravelly soil and stony earth mixed with stone and boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 385 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) |
| 386 | 65mm Dia |
| 387 | 80mm Dia |
| 388 | Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. |
| 389 | 65mm Dia |
| 390 | 80mm Dia |
| 391 | Supplying all materials, labour, T&P and fitting and fixing of CI/DI gate valve of following Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 392 | 65mm Dia |
| 393 | 80mm Dia |
| 394 | Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with flyash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:3) to inside and cement flush pointing (1:3) to outside surface with 100mm thick RCC M25 cover slab with 12mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, design and direction of Engineer-in-charge. |
| 395 | Sluice Valve Chamber (0.75x0.75x1.20mtr) |
| 396 | Providing & fixing of following dia CI/DI body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS 780 |
| 397 | 65mm Dia |
| 398 | 80mm Dia |
| 399 | Supplying all materials, labour, T&P, fitting & fixing of different size bourden type pressure gauge of reputed make (0-10 kg/sqcm) with valves, piping, fitting of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the Engineer-in-charge. |
| 400 | Supplying all materials, labour, T&P and fitting and fixing of double air valve confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 401 | Supplying all materials, labour, T&P and fitting and fixing of CI/DI foot valve of following Dia confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. |
| 402 | 65mm Dia |
| 403 | 80mm Dia Please Enable Macros to View BoQ information |
| 404 | 80mm Dia Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
