Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation trenches in Stoney earth soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. |
| 2 | Earthwork in excavation of foundation trenches in hard rock granite removed by chiselling including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. |
| 3 | Supplying all labour, T&P for the Carriage of excavated materials by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 4 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 5 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge. |
| 6 | Brick work in Found.& Plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 7 | R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel. |
| 8 | Column Base |
| 9 | Column |
| 10 | Plinth Beam |
| 11 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. |
| 12 | Supply, fabrication, & Erection of MS Modular self-supporting space frame structure to cover as MS Pipe Thickness as per structural design. Length as per module including Paints of approve colour. Nodes: Octagonal /Round, Hollow/Solid Nodes as per design The Item including design, procurement, fabrication, welding, painting, supply, erection, etc. complete as per drawing, as directed by consultant/EIC, Rate shall include all Material, labour, accessories, safety measures, tools, equipment’s, transportation, erection to the satisfaction of consultant, etc. complete |
| 13 | Providing and fixing of 65/400 of approved make Self Supported Concealed fix Aluminium STANDING SEAM ROOFING SYSTEM in 1.0mm thick AA-3004 Aluminium Alloy including accessories complete comprising of the following layers: Top Layer - Aluminum Profile Standing Seam65 mm rib height and 400 mm width of STRAIGHT/CURVE profiled panel as perthe Roof Geometry, manufactured fromapproved manufacturer Aluminum Alloy AA 3004 - as specified in BS EN1396:200, minimum material thickness of 1.0 mm with25 micron PVDF finished. The material properties shall be, Ultimate tensile strength: minimum 200 N/sqmm, 0.2% Proof Stress: min 185 N/Sqmm, Modulus of elasticity: 70,000 N/sqmm. Sheets are to be laid in Single Length to meet the requirements of the building geometry and fixed on Aluminum Clip/ Halter and which is fixedwith SS-304 screws. Detail structural load calculation report to be provided by the manufacturer based on wind load as per IS 875 and screw pull out force. Second Layer- Stonewool Insulation of 100mm (50 mm + 50mm) thickness x minimum 60kg/m3 density. K-value 0.038 W/mK as per standard ASTM C518. Fire classification as per BS 476: Part 6&7. Thermal Transimttance (U value) to be 0.36 W/m2. Sound Transmission Class (STC) to be 35±3. Calculation of STC to be submitted etc completed as per specification & Direction of EIC/Architects. |
| 14 | Third Layer- Vapour Control Layer: A single layer VCL, Polyethylene based vapor control membrane, reinforced with mono filament scrim to provide tensile strength. VCL weight 250 GSM, with Water Vapor permeability less than 0.39 grams / m2/ day Bottom Layer - Bottom Sheet - Galvanised Steel pre-coated 0.70mm total coated thickness (TCT). profile sheet of 980-1050 mm effective cover width and 28-38 mm height ribs with pitch 190-250 mm centre-tocentre. The feed material is manufactured out of nominal 0.70 mm Total Coated Thickness (TCT), Histrength steel with min. 550 MPa yield strength. Fixed to the purlins with self drilling screws at 500mm spacing. The work shall be executed as per manufacturer's specifications wherever applicable, relevant code of practice and sound engineering practice). FLASHING: Supply and fixing of Aluminum flashing of approved make 1.0mm thick at roofing periphery and as per site requirement. GUTTER: Supply and fixing of gutters as per detailed drawings consisting and aluminum gutter of 2mm in mill finish thickness, fabricated as per the sizes required. Supply and fixing of single skin 2 mm Aluminum gutter, GRADE AA 1100/AA1200 ALLOY with EPDM Expansion joints for every 6.0mtr length, Down take spout of 100- 250 mm & other accessories and welding at joints. The Girth of gutter shall be minmium 1200mm |
| 15 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 16 | Providing and laying Vitrified floor tiles 600x1200 mm (thickness 8 to 10mm) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA & Johnson or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including grouting the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge /Architects. |
| 17 | Providing and fixing of Vitrified wall tiles 600x1200 mm (thickness 8 to 10mm) 1st quality of NITCO, SOMANY, ASIAN, KAJARIA & Johnson or equivalent approved make, colours & shades laid on 20 mm thick cement mortar 1:4 (1cement: 4coarse sand ) including grouting the joints with white cement and matching pigments, etc. complete as per direction of Engineer-In-Charge /Architects. |
| 18 | Providing 20mm thick and above 0.40 Sqm size granite tile flooring in platform, staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 19 | Painting to external surface of building/Boundary wall with two coats of weather coat with one coat primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 20 | Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. |
| 21 | Supply and installation of Lingel Aluminum System Fixed/Sliding Doors & Windows, designed for high performance, long service life, and smooth operation. The system shall be fabricated from precision-engineered aluminum profiles, ensuring superior strength, finish, and durability. Aluminum Material, Aluminum Alloy: 6063 (T6 temper) as per international standards, Surface finish: Akzonobel Powder coating, uniform and durable, with a coating thickness of 60–80 microns in approved color., Design Frame System wall thickness-1.5mm, Glass sash of thickness 6mm, profile shall be multi-chambered for strength, insulation, and drainage, All corner joints shall be precisely 45° mitered, crimped, glued, and riveted to ensure structural stability, and corner force 8kn, Screw-type corner joints are not accepta,ble.,The wind speed 2-2.5kpa, Glazing System, Glass beading system provided for easy replacement and maintenance,Glazing to be installed with high-quality EPDM gaskets for complete sealing against air and water infiltration, Hardware & Accessories, High-performance rollers, Anti-lift device to prevent sash lifting and enhance safety, Guide rail system for smooth and stable sash movement, Wool pile weather strips at interlocks and sliding interfaces to prevent dust and noise infiltration, EPDM gaskets for superior sealing and longevity, All necessary hardware such as handles, multipoint locks, stoppers, and interlocks to be provided as per Lingel standards. |
| 22 | Providing and fixing Rollers blinds of MAC/VISTA brand as per the approved shade and design alongwith all the accessories including cost, conveyance, loading, unloading of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 23 | Providing Stainless Steel CNC Cutting Design in Ceilling with fitting of all hardware including cost of all materials,labour,T&P etc complete As per direction of EIC/Architects. |
| 24 | Providing,fitting & fixing of decorative baffle false ceilling with all fitting & fixtures of approved make i.e. Hunter douglas/Anulon/Armstrong etc as per approved make design specification colour etc complete including substructure with MS Section required for strengthening the ceilling inclusive of all materials,labour,T & P required for the work as per specification & direction of EIC. |
| 25 | Providing and painting texture paint (two coats) over a coat of base paint of approved quality and approved shade in all floors at all height by making the surface to the interior texture paint surface of wall smooth including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge/Architects. |
| 26 | Dismantalling and removal of old RCC from beam, column, roof slab,self, chajja etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 27 | Furniture |
| 28 | Supplying,fitting & fixing of Dinning table 4 seater make Godrej/Geeken/Featherlite or Equivalent etc complete as per Specification & direction of EIC/Architects. |
| 29 | Supplying,fitting & fixing of Dinning Chair make Godrej/Geeken/Featherlite or Equivalent etc complete as per Specification & direction of EIC/Architects. |
| 30 | Supplying,fitting & fixing of Cash/Reception table make Godrej/Geeken/Featherlite or Equivalent etc complete as per Specification & direction of EIC/Architects. |
| 31 | Supplying,fitting & fixing of good quality Dustbin etc complete as per Specification & direction of EIC/Architects. |
| 32 | Supplying, fitting and fixing of color coated trapezoidal sheet TRIMDEK 1015 profile sheet from TATA BLUESCOPE STEEL or any approved equivalent. The base metal sheet of 0.45mm thick. High Tensile steel with minimum 550MPa yield strength, metallic hot dip coated with aluminum zinc alloy of 55% aluminum 45% Zinc as per AS 1397 – Zincalume® AZ 150 (minimum 150grams as per square meters, total on both sides) with COLORBOND® - Polyester Based quality Paint conforming to AS/NZS 2728 class 3. The paint shall have a total coating thickness of nominal 35 micron (Nominal 20micron exterior coat on top surface and nominal primer coat) on both surfaces with approved color shade etc. complete. Accessories – Fasteners: The steel sheet shall be fastened with min.40Pm zinc coated or min 20Pm Zinc-Tin alloy coated, Hex head, self-drilling screw as per AS 3566 class 3 fasteners of approved make (Buildex of equivalent) with EPDM washer on each crest of sheet for connecting with purlin (or as per design) perpendicular to the sheeting and in the center of the corrugation of rib including cost of all materials, labour, T & P and transportation complete in all respect as per design and drawing as directed by the Engineer-in- charge. |
| 33 | Providing edge moulding to 18 mm thick granite stone counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 34 | Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 35 | PH Works |
| 36 | Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted rimless water closet of Hindware make having cat no 92528 or equivalent type of approved make including supply of matching P/S trap to the wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, 15mm dia connection pipe ALD 803 AB, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. |
| 37 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Table top wash hand basin of size 54x42x16.5cm dia of Hindware make having cat no 91046 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. |
| 38 | Supplying and fixing sensor urinal of size 37x39x61cm of Hindware make having cat no 60018 and division plate 61001 or equivalent of approved make including all fittings like 450mm long connection pipe, waste coupling nut, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. |
| 39 | Supplying all materials, labour, T&P and fixing standard sized Bib cock short body of Jaquar Cat. No.-KUP-35037PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 40 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-KUP 35053PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 41 | Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-AKP 35731P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 42 | Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.-AKP 35721P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 43 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24\\" of Jaquar Cat. No.-AKP 35711PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 44 | Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. |
| 45 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of Jaquar Cat. No.-KUP-35001PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 46 | Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-KUP 35041PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 47 | Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 48 | Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-AKP 35771P or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 49 | Supplying all materials, labour, T&P and fixing toilet paper holder of Jaquar Cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 50 | Supplying all materials, labour, T&P and fixing standard sized CP robe hook of Jaquar Cat. No.-AKP-35791P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 51 | Supplying all materials, labour, T&P and fixing grab bar of Jaquar Cat. No.-ACN 1101S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 52 | Supplying all materials, labour, T&P and fixing standard sized urinal valve of Jaquar Cat. No.-PRS-077 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 53 | Supplying all material, labour T&P and fixtures for providing and fixing of stain less steel sink of size 915x510mm of NIRALI (Elegance Ultra) or equivalent type of approved make with its components like 40mm CP waste of cat no ALD 709, 40mm waste pipe etc, including all requisite fixing materials complete as per the PH specification and direction of Engineer-in-charge |
| 54 | Supplying all materials, labour, T&P and fixing standard sized sink cock of Jaquar Cat. No.-KUP-35021PM or equivalent type of approved make of Hindware / Parryware make complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 55 | Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 56 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. |
| 57 | 20 mm dia |
| 58 | 25 mm dia |
| 59 | 32 mm dia |
| 60 | Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. |
| 61 | 25 mm dia |
| 62 | 32 mm dia |
| 63 | 40mm dia |
| 64 | 50mm dia |
| 65 | Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. |
| 66 | 75mm dia |
| 67 | 110mm dia |
| 68 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 69 | Supplying all materials,labours,T&P for cutting holes (250-375)mm thickness through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 70 | Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. |
| 71 | Supplying all materials, labour, T&P and fittings and fixing of 2000 ltr Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. |
| 72 | ELECTRICAL |
| 73 | Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havells/KEI/Eq) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Panasonic Vision/Eq) |
| 74 | GROUP-A |
| 75 | GROUP-B |
| 76 | GROUP-C |
| 77 | Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr |
| 78 | Recessed wiring to ceiling fan point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group c |
| 79 | Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/ Finolex/Eq) Group C |
| 80 | Supply and fixing of 5 / 6 amp socket outlet with 6 Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge. |
| 81 | Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire KEI /Polycab/ Anchor / Havels/ Finolex /Eq) |
| 82 | Supply and fixing of 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 83 | Supply and fixing of 1x 6 + 1x16 amp socket outlet controlled by 1x 6 + 1x16 amp 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 84 | Supply and fixing of 6 pin 16 amp socket outlet with 16 Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. |
| 85 | Supply and fixing of 6 pin 16 amp socket outlet ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. |
| 86 | Supply and fixing of 32 amp Modular DP switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. |
| 87 | Recessed wiring of modular type 1500mA, 5V Type-A USB CHARGER 1M with 6A 250V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size, including all accesories and connection on existing switch board as per direction of Engineer in Charge. (Make- Schneider (Zencelo) / Legrand (myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) |
| 88 | Supply and fixing of A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure, 20A /32A SP MCB including all accesories and connection as per direction of Engineer-in-charge. |
| 89 | Supply and fixing of 3 x 6 amp socket outlet controlled by 2 nos 6 Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 90 | Supply and fixing of TV/ Telephone point on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 91 | Sub-main wiring in 20/25/32mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. |
| 92 | (2 x 1.5 + 1 x 1.5) sq.mm copper wire |
| 93 | (2 x 2.5 + 1 x 1.5) sq.mm copper wire |
| 94 | (2 x 4 + 1 x 2.5) sq.mm copper wire |
| 95 | (2 x 6 + 1 x 2.5) sq.mm copper wire |
| 96 | (4 x 4 + 1 x 2.5 ) sq.mm copper wire |
| 97 | (4 x 6 + 1 x 2.5 ) sq.mm copper wire |
| 98 | 2 Pair PVC Insulated Telephone cables |
| 99 | 5 Pair Jelly filled Telephone cables |
| 100 | 10 Pair Jelly filled Telephone cables |
| 101 | RG 06 Co-axial Cables |
| 102 | 2x1.0 sq. mm Speaker cable |
| 103 | CAT6 Cables |
| 104 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door powder coated wall mounted 12 way SPN Distribution Boards with bottom detachable plate for interconnections etc .Incommer 1 No-63Amp DP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-10 Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) |
| 105 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63/40Amp FP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) |
| 106 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door Vertical type powder coated wall mounted 4 way Vertical TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A/63A/80A/100A FP MCCB (25KA) Outgoings-10/16/32A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) |
| 107 | Supply and fixing of 5 amp to 32 amp rating 240 V \\"B\\" series single pole miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. |
| 108 | Supply and fixing of 40/63 amp DP miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required as per the direction of Engineer-in-Charge. |
| 109 | Supply and fixing of 40/63 amp TPN miniature circuit breaker suitable for inductive loads in the existing MCB DB of approved make with all other accessories etc as required complete as per the direction of Engineer-in-Charge. |
| 110 | Supply, Installation, Testing, and commissioning of ventilating Plastic Body Exhaust fan 200 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting frame and louvers of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 111 | Supply, Installation, Testing and Commissioning of Metal body Exhaust fan 380 mm sweep 1400 rpm vheavy duty of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj). |
| 112 | Supply, Installation, Testing and Commissioning of 1200 mm sweep 4 blades Decorative ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make- Havells Florence/Crompton /Usha/Orient /Bajaj). |
| 113 | Supply, Installation, Testing, and commissioning of decorative ceiling fan 900/1200 mm sweep 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make-Havells SS 390/Crompton /Usha /Orient /Bajaj). |
| 114 | Supply, Installation, Testing, and commissioning of 300 mm dia Wall Fan of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make-Havells/ Crompton /Usha /Orient /Bajaj). |
| 115 | Supply, Installation, Testing, and commissioning of decorative pedestal fan 450mm sweep,120watt, 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells - V2 Neo/ Crompton /Usha/Orient /Bajaj) |
| 116 | Supply, Installation,Testing & commissioning of Surface mounting 10 W LED tube light fitting with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro/K lite /Crompton/Bajaj / Panasonic). |
| 117 | Supply, Installation,Testing & commissioning of Surface mounting 20 W LED tube light fitting with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic). |
| 118 | Supply, Installation,Testing & commissioning of Surface mounted Celing 9 watt LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic). |
| 119 | Supply, Installation,Testing & commissioning of Surface mounted Celing 18 watt LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic). |
| 120 | Supply, Installation,Testing & commissioning of Recessed mounted 8 watt LED Adjustable Cob Down Light with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic). |
| 121 | Supply, Installation,Testing & commissioning of Recessed mounted Celing 9 watt LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic). |
| 122 | Supply, Installation,Testing & commissioning of Recessed mounted Celing 12 watt LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic). |
| 123 | Supply, Installation,Testing & commissioning of Recessed mounted Celing 36 watt 2 x 2 LED luminaries with Aluminum housing and heat sink for better thermal performance of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Make: Havells / Philips/Wipro /K lite /Crompton/Bajaj /Panasonic). |
| 124 | Supply, Installation,Testing & commissioning of Flexible LED strip wide viewing angle for good light distribution & IP 65 protection, linkable and easy to install, complete with separate replaceable electronic driver of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro/Klite /Crompton/Bajaj /Panasonic). |
| 125 | Supply, Installation,Testing & commissioning of Recessed mounted 7 watt IP 65 LED Rectangular Step light. Construction in die-casted aluminum powder coated, its integrated LED ensures long-lasting and energy efficient of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Havells / Philips/Wipro/Klite /Crompton/Bajaj /Panasonic). |
| 126 | Supply, Installation,Testing & commissioning of Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 base of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: Philips 31457 Tale /Havells / Wipro/Klite /Crompton/Bajaj /Panasonic). |
| 127 | Supply, Installation,Testing & commissioning of 9W LED Integrated wall Light ( Mirror Light) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 581916/ Jaquar /Havells /Klite /Phillips /CG/Bajaj) |
| 128 | Supply, Installation,Testing & commissioning of 12W LED Picture Light Chrome finish of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 31440/ Jaquar /Havells /Klite /Phillips /CG/Bajaj) |
| 129 | Supply, Installation,Testing & commissioning of Pendant light with Copper glass Copper finishing, Net Weight (kg): 0.6,Lamp: E-27 LED 9W of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Jaquar JNL-COP-MD150031251A/Klite / Phillips/ Havells/) |
| 130 | SITC of Profile light, LED Strip for profile lighting with aluminium chanel and defuser, long life: 30,000 burning hours, Housing: Superior adhesive for easy and worry-free installation, Other features: 240 LEDs per meter, 900 lumen per meter & comes with a driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 131 | Supply, installation, testing & commissioning of IP 65 LED street Light of 90 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body having in built electronic driver which have 50000 burning hour road way luminaries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 132 | Supplying, Installation, Testing & Commissioning of 15 Ltr Capacity 5 Star rating Electric Storage Water Heater of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Havells-Puro Turbo DX / V Guard / Jaquar) |
| 133 | Pannel Board , Earthing, Cable & DG |
| 134 | Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete. MAKE- Legrand / Schneider/Hager/ L&T/SIEMENS/Eq. |
| 135 | Main Panel 250 Amp 4 P MCCB 25 KA -1 No, 160 Amp 4P Changeover - 1 no as incomer, 63/80/100 Amp 4P MCCB 18 KA- 4 Nos, 63/40 Amp 4P MCB 10 KA 2 Nos, , 32 Amp DP MCB 10 KA -2 Nos with copper busbars 4nos of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 136 | Supplying, storing, laying, testing and commissioning of 3 c x 6 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 137 | Supplying, storing, laying, testing and commissioning of 4 c x 10 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 138 | Supplying, storing, laying, testing and commissioning of 4 c x 16 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 139 | Supplying, storing, laying, testing and commissioning of 3.5c x 50 Sq. mm armoured Aluminium Cable direct in ground including excavation, sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 140 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 141 | Supplying and laying 25 mm x 6 mm Copper earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 142 | Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 143 | Supply, Installation, testing and commissioning of CPCB IV+ 58.5 KVA, 3 Phase, 415V AC, Silent DG Set comprising of Engine, with minimum rated BHP (As per Engine Manufacturer Standard) at 1500 RPM, coupled with alternator of same make mounted on a common base frame alternator of same make mounted on a common base frame alternator of same make mounted on a common base frame complete with Engine, Engine, with minimum rated BHP (As per Engine Manufacturer Standard) at 1500 RPM, coupled with alternator of same make mounted on a common base frame alternator of same make mounted on a common base frame alternator of same make mounted on a common base frame complete. ( Make - Jakson/Kirloskar) AMF control panel (Comprising of Minimum 125 Amp MCCB & Relays for both DG & Main Supply) Fuel tank, Battery & leads, Silencer – Residential, AVM pads, First Fill of lube oil, Acoustic enclosure |
| 144 | CCTV & MUSIC SYSTEM |
| 145 | Supply, Installation, Testing & Commissioning of Indoor Dome IR Network Camera (1/2.7\\" CMOS sensor, Mini. Pixel of 2560*1920 or higher video quality, frame rate of Up To 25fps @ 2MP, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and out etc complete with connection as required for the work as per direction of Engineer-in-Charge. (Make- CP Plus / Dahua / Prama) |
| 146 | Supply and Installation of outdoor Bullet IR Network Camera 1/2.7\\" CMOS, ICR, 2592*1944@ 25fps, 2MP H.265/H.264/MJPEG, Triple streams, DC12V & PoE, Micro SD card slot up to 256 GB, Alarm in/out , Audio 1/1, IP67, 2.7-13.5mm Motorized Varifocal lens, IR anti-reflection window, Built-in bracket, IR range: up to 50m, Digital WDR Range, 3D-DNR for noise reduction, Audio In and Out, Alam in and Out IPv4 network supported, IP67 rated for weather proofing etc complete with connection as required for the work as per direction of Engineer-in-Charge. (Make- CP Plus / Dahua / Prama) |
| 147 | Supply of 16 Channel NVR (Upto 8 Mega Pixel Camera Supported) etc complete of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus /Hikvision /Honeywell) |
| 148 | Supply of 4TB Surveillance Hard Disk etc complete of approve make as per the direction of Engineer-in-Charge.( Make - WD/ Seagate) |
| 149 | Supply of 16 Port GIGABIT PoE Switch with Fiber Port and GIGA Uplink Port of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Hikvision) |
| 150 | Supply of 9U Network Rack (Server Room) Includes PDU , FAN and Cantilever Shelf Tray of approve make as per the direction of Engineer-in-Charge.( Make - CP Plus/ Tyco / Legrand / Digisol/Dlink) |
| 151 | Supply of 4K HDMI Cable 5 Mtr long of approve make as per the direction of Engineer-in-Charge.( Make - Tyco / Hifocus / Digisol/Honeywell) |
| 152 | Supply and installation of WIFI Access Point make-Grandstrem |
| 153 | Supplying, installation, Testing & commissioning of 43\\" Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG/Samsung/Sony) |
| 154 | Installation Testing & Commissioning of CCTV System etc Complete. |
| 155 | Supplying, installation, testing & commissioning of 6/8 Watt Wall /ceiling speaker of JBL complete of approved make complete with all materials & labour as required as per the direction of Engineer-in-Char |
| 156 | Supplying, installation, testing & commissioning of 250 watt Amplifier with bluetooth & USB port facilities of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Bosch/ Crown/ Yamha) |
| 157 | AIR CONDITIONING: |
| 158 | Supply of Inverter type Variable Refrigerant Volume system with Hermatically Sealed Compressors (all compressors will be inverter type), cooling mode, Top discharge type condenser fan, ODU refnet, air cooled Cu condenser with hydrophilic blue film coated fins, micro processor panel and other standard accessories as per specification. The unit shall be suitable for operation with R 410a refrigerant. (Make:Mitsubishi /Daikin/O General/LG) |
| 159 | Supply of Variable Refrigerant Volume type Indoor Unit comprising of Cu coil section, filter section, micro- processor type PCB. The unit shall be ceiling suspended type and complete with all standard accessories. Unit shall be compatible with running condition of 230V-1Ph-50Hz electrical supply including supply of Cordless remote .Unit shall be VRV CASSETTE AC of following capacity (Make:Mitsubishi /Daikin/O General) |
| 160 | 1.5 TR |
| 161 | 2.5 TR |
| 162 | Supply of IDU Y joints / Distribution joints. |
| 163 | Supply of ODU Y joints / Distribution joints. |
| 164 | Supply of Cordless Remote |
| 165 | Installation, testing and commissioning of the above VRV outdoor units with R410A refrigerant, controls, electricals, necessary accessories. Capacities of VRV- 28 HP Outdoor |
| 166 | Installation, testing and commissioning of all above VRV indoor units with refrigerant, controls, electricals, necessary accessories etc. |
| 167 | Supply, installation, testing and commissioning of PVC pipe medium class (for drainage of water from IDU) with 6 mm thick Nitrile Rubber insulation. |
| 168 | Supply & Laying of Cu scheilded flexible communication cabling between ODU and IDU as per OEM Specification (VRV). Cable shall be laying through hard PVC conduit pipe |
| 169 | Supply & Filling of First charge of Refrigerant R410a |
| 170 | Supply, installation, testing and commissioning of Cu. refrigerant pipes (requried as per OEM design) duly insulated with 19mm / 13mm close cell elastometric nitrite rubber insulation between each set of outdoor and indoor units (VRV). |
| 171 | 41.1 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 172 | 38.1 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 173 | 34.1 mm O.D. (with 19 mm insulation) |
| 174 | 31.8 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 175 | 28.58 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 176 | 25.4 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 177 | 22.2 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 178 | 19 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 179 | 15.86 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 180 | 12.7 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 181 | 9.5 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 182 | 6.4 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 183 | Fire Fighting System |
| 184 | Providing and fixing carbon-di-oxide type 4.5 KG fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS : 2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire |
| 185 | Providing and fixing ABC type 6 KG fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/ Fireshield/Kanex/ Ceasefire |
| 186 | Supply and installation of Rubber Mats 12mm thick of size 2000 mm x 1000mm x 12 mm thick Electrical tested with test certificate. |
| 187 | Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. |
| 188 | Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. |
| 189 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 190 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 191 | Providing and fixing Main Fire Alarm Control Panel - 8 zone with all necessory accesorries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
