Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Ground floor |
| 2 | Providing partition of full height solid partition for in other area as per drawing with Aluminium frame 63.5x38.1 mm with 1.5mm thickness intermediates, verticals and horizontal (600mmx600mm) as shown in drawing and shall be fixed to floor, ceiling, walls etc. with suitable size of screws, plugs including making good to damages, with the cost of applying a coat of primer to exposed faces of the timber and fixing 9 mm thick.BWP ply both sides of approved make and quality confirming to IS 710 (Green, Century, Sylvon, Archid) over the frame work with screws at adequate intervals and fixing 1.0 mm thick Laminate both sides on ply (suede finish, green, century, Merino) with adhesive including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. |
| 3 | Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make door closure having model no 8341, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 4 | Supplying,fitting & fixing of 10mm thick toughened glass with eatching including cutting to sizes with cost of nails & putty including cost,conveyance & labour charges etc complete as per specification & direction of EIC. |
| 5 | Supplying,fitting & fixing of cup-board make 19mm thick solid ply with two side panel, one bottom panel and a back panel framing with 1mm thick colour laminate. It should have two shutters with approved shade of laminate. The stutter should be fixed into the cabinet by auto shut hinges. All hardware should be of Heitich make etc complete as per direction of Engineer-in-charge. |
| 6 | Providing and fixing Rollers blinds of MAC/VISTA brand as per the approved shade and design alongwith all the accessories including cost, conveyance, loading, unloading of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 7 | Labour engaged for shifting of materials like (Almirah, Rack,Table,Chair,Godrej) etc complete as per specification & direction of EIC. |
| 8 | Providing and painting two coats with plastic emulsion paint of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth including cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 9 | Dismantalling and removal of old RCC from beam, column, roof slab,self, chajja etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 10 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 11 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 12 | 1st floor |
| 13 | Dismantling and removing of old brick works including stacking the useful materials for reuse and removing the debris within 50m lead etc complete as per specification & Direction of EIC.(1st floor) |
| 14 | Dismantling and removing of old floor tiles including stacking the useful materials for reuse and removing the debris within 50m lead etc complete as per specification & Direction of EIC.(1st floor) |
| 15 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalities of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.(1st floor) |
| 16 | Dismantling and removing old false ceiling including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.(1st floor) |
| 17 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.(1st floor) |
| 18 | Dismantling and removing old partition including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.(1st floor) |
| 19 | Providing scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge.(1st floor) |
| 20 | Brick work in superstructure with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royality of all materials, labour, T&P etc. and as per direction of Engineer in charge.(1st floor) |
| 21 | Brick work in superstructure with flyash bricks in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royality of all materials, labour, T&P etc. and as per direction of Engineer in charge.(1st floor) |
| 22 | R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 23 | Lintel |
| 24 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. |
| 25 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 26 | Providing 16mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 27 | Providing, fitting, fixing up False ceiling ( Make: GYPROC) of approved design and drawing in all floors with G.I Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2’-0”x2’-0” to be suspended from ceiling by using 12mm thick POP Board including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 28 | Poviding & fixing of Gypsum board (12.5)mm thick Partition with alluminum channel of size 67.5 x 37.5 mm in all floors including cost of all materials, all labour, T&P etc. required for the work in all respect as per the direction of the Engineer-in-charge/Architects. |
| 29 | Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials labour T & P etc complete as per direction of Engineer-in-charge/Architects. |
| 30 | Providing and painting Royale play archi concrete paste texture paint (two coats) over a coat of base paint of approved quality and approved shade in all floors at all height by making the surface to the interior texture paint surface of wall smooth including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge/Architects. |
| 31 | Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth including cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge/Architects. |
| 32 | Providing door frames made out of BWP PLY pasted with 4 mm thick veneer with PU polish including cost of all hardware fittings,cost,conveyance,royality & cost of all labour,T&P etc complete in all respect as per the direction of Engineer in charge/Architects. |
| 33 | Providing 35 mm thick flush Door Shutters made out of Core of 32 mm Block Board pasted both side with 4 mm veneer with melamine polish inclusive all hardware fittings with cost, conveyance,royality & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charge/Architects. |
| 34 | Providing and fixing of UPVC ventilator of 5mm frosted glass with weatherseal ultima casement series of size 60mmx56mm.with solid pop up handel double wheel adjustable with groove including cost of all hardware fittings,cost,conveyance,royality & cost of all labour,T&P etc complete in all respect as per the direction of Engineer in charge/Architects. |
| 35 | Providing & fixing of UPVC window of weatherseal ultima sliding series with 6mm clear toughned glass of sliding track 60mmx48mm & slidding sash 39mmx88mm of double wheel adjustable with groove including cost of all hardware fittings,cost,conveyance,royality & cost of all labour,T&P etc complete in all respect as per the direction of Engineer in charge/Architects. |
| 36 | Providing and fixing of Matt finish vitrified tiles(800x800)mm size of 6-8mm thick in flooring for corridor, lobby and similar locations where ever required in horizontal surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 5mm thick bed of adhessive with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. |
| 37 | Providing and flooring for Quartz classic tile for toilet and similar locations where ever required in horizontal surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 25mm thick bed of cement mortar 1:1 (1 cement: 1coarse sand)/adhessive with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish including cost,conveyance,royality & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 38 | Providing and fixing of Quartz classic tiles in dadooes / walls for corridor, lobby,toilet and similar locations where ever required in horizontal surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 12mm thick bed of cement mortar 1:3(1 cement: 3coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish including cost,conveyance,royality & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 39 | Providing and fixing subway tile picket sage plain of size 300mmx75mm in dadooes / wall for corridor, lobby and similar locations where ever required in horizontal surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 12mm thick bed of cement mortar 1:3 (1 cement: 3coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish including cost,conveyance,royality & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 40 | Providing and fixing of rome yellow subway tile of size 100mmx300mm dadoo / wall for corridor, lobby and similar locations where ever required in horizontal surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 12mm thick bed of cement mortar 1:3 (1 cement: 3coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish including cost,conveyance,royality & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 41 | Providing, fitting fixing of wall panelling made out of Al Section no 9835 as horizontal and vertical member placed at a spacing of 2'-0\\"x2'-0\\" c/c with 19 mm thick Block Board provided with 4mm thick veneer with PU polish etc complete with all material & all labour T&P etc as per specification approved by the Department & as per direction of EIC/Architects |
| 42 | Providing & fixing VENETO or CNG profile frames, sliding tracker , profile handel with lock, handel and saint gobin 8mm thick toughenned clear and flutted glass with 16mm front and 45mm side thickness profile in openings including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 43 | Providing partition of full height solid partition for in other area as per drawing with Aluminium frame 63.5x38.1 mm with 1.5mm thickness intermediates, verticals and horizontal (600mmx600mm) as shown in drawing and shall be fixed to floor, ceiling, walls etc. with suitable size of screws, plugs including making good to damages, with the cost of applying a coat of primer to exposed faces of the timber and fixing 9 mm thick.BWP ply both sides of approved make and quality confirming to IS 710 (Green, Century, Sylvon, Archid) over the frame work with screws at adequate intervals and fixing 1.0 mm thick Laminate both sides on ply (suede finish, green, century, Merino) with adhesive including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. |
| 44 | Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make door closure having model no 8341, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 45 | Providing and fixing Rollers blinds of MAC/VISTA brand as per the approved shade and design alongwith all the accessories including cost, conveyance, loading, unloading of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 46 | Supplying, fitting & fixing of File Cabinet made out of 19mm BWR Block board pasted with 1mm thick Sunmica of approved shade to all sides. The front shutter is with 19mm BWR Block Board with both side sunmica and with all fittings & fixing all exposed edge is fixed with teak wood beading at all sides necessary locking arrangement with cost of all materials and labour etc. complete. |
| 47 | Providing, fitting, fixing up veneer false ceiling made out of 12 mm thick BWP solid ply fixed to the GI sections with all hangeredge member and other clips and ply fixed with proper phillip fastner and pasted with 4 mm thick veneer of approved design and drawing in all floors including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge/Architects. |
| 48 | Supplying,fitting & fixing of back 6mm flexi ply make(Green/Century or equivalent) over natural stone veneer(8'x4') with lineer profile light including cost,conveyance,royality & cost of all labour, T&P etc complete in all respect as per the direction of the Architects/Engineer -in-Charge. |
| 49 | Supply and installation of Rest Room Cubicles and Urinal Partitions (Model Type: Greenlam Sturdo Essentia-Serene-Suede-1995) made of Compact laminate of thickness 12mm, Door height is 750mm x 1785mm, Divider height is 1820mm, avg depth is 1463mm and avg width is 1350mm (materials used Aluminium PC Door Stopper Channel, Aluminium PC Top Rail, Aluminum PC U Channel, Noise Deafening Tape, Nylon Adjustable Foot ,Nylon Coat Hook, Nylon Door Knob, Nylon Gravity Hinge, Nylon Thumb Turm Indicator, & Screws SS 316 & Wall Plugs etc complete as per specification & direction of EIC/Architects. |
| 50 | Furniture |
| 51 | Supplying,fitting & fixing of office table(TIARA1) MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 52 | Supplying,fitting & fixing of office table(1950x2000x750)mm, MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 53 | Supplying,fitting & fixing of office table(1650x1900x750)mm, MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 54 | Supplying,fitting & fixing of Conference table(3000x1200x750)mm, MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 55 | Supplying,fitting & fixing of Liner Workstation, MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 56 | Supplying,fitting & fixing of Workstation(Two seater), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 57 | Supplying,fitting & fixing of Workstation(Four seater), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 58 | Supplying,fitting & fixing of Chair(President), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 59 | Supplying,fitting & fixing of Chair(GM230), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 60 | Supplying,fitting & fixing of Chair(GM233), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 61 | Supplying,fitting & fixing of Chair(Plasma1), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 62 | Supplying,fitting & fixing of Chair(Plasma2), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 63 | Supplying,fitting & fixing of Visitors Chair, MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 64 | Supplying,fitting & fixing of Sofa(2seater), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 65 | Supplying,fitting & fixing of Sofa(Single seater), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 66 | Supplying,fitting & fixing of Center table(Alice 4'), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 67 | Supplying,fitting & fixing of Center table(Mega 4'), MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 68 | Supplying,fitting & fixing of Storage3(High 1600x550x2000)mm, MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 69 | Supplying,fitting & fixing of Storage8(Low 1800x450x750)mm, MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 70 | Supplying,fitting & fixing of Storage5(High 900x450x750)mm, MAKE(Geeken/Godrej/Featherlite or equivalent) including cost,conveyance,royality & cost of all labour, T&P etc complete as per specification & Direction of EIC/Architects. |
| 71 | Art work |
| 72 | Supply & fixing of Sagwan Door Kunda(Size 5'6'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 73 | Supply & fixing of Sagwan Table Kunda (Size 3'6'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 74 | Supply & fixing of Sagwan Mukteswar Gate (Size 3'6'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 75 | Supply & fixing of Table Leg- Rectangular, Khandolite Konark Design (Size 2'8''x3'0'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 76 | Supply & fixing of Table Leg- Circular, Khandolite Konark Design (size2'8''x2') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 77 | Supply & fixing of Mica Tribal Patachitra (Size 2'0''x4'0'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 78 | Supply & fixing of Nabagunjara Patachitra (Size 4'0''x3'0'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 79 | Supply & fixing of Console Painting (Size 2'8'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 80 | Supply & fixing of wall artefact (Size 9''x9'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 81 | Supply & fixing of wooden stands for planters (Size 1'4'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 82 | Supply & fixing of wooden stands for planters (Size 1'8'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 83 | Supply & fixing of wooden hanging lights (Size 2'6''x3'0'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 84 | Supply & fixing of stone miniature monuments (Size 1'6'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 85 | Supply & fixing of wooden stands for Artefacts (Size 1'x1'x2') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 86 | Supply & fixing of wooden stands for Artefacts (Size 1'x1'x2') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 87 | Supply & fixing of Buddha Sculpture (Size 5') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 88 | Supply & fixing of Buddha Head (Size 4'6'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 89 | Supply & fixing of Muguni floral design (Size 6'0'') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 90 | Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required for execution of the mural art to give the finish product in all respect as desired by the Engineer in charge. |
| 91 | Supply & fixing of sandstone floral design(Size 12') as designed by Architects including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 92 | Dismantalling work |
| 93 | Dismantalling and removal of old RCC from beam, column, roof slab,self, chajja etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 94 | Dismantling and removing of old brick works including stacking the useful materials for reuse and removing the debris within 50m lead etc complete as per specification & Direction of EIC. |
| 95 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 96 | Dismantling and removing of old lime concrete including stacking the useful materials for reuse and removing the debris within 50m lead etc complete as per specification & Direction of EIC. |
| 97 | Supplying all labour, T&P for the Carriage of dimantaling materials by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 98 | Peripheral works |
| 99 | Earthwork in excavation of foundation trenches in All kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. |
| 100 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). |
| 101 | Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge. |
| 102 | R.C.C. work of M-25 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth including centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel. |
| 103 | Column Base |
| 104 | Column |
| 105 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. |
| 106 | Providing,Manufacturing, Supplying and installation of Parking shed design by the Architects( The posts are made of MS structure firmly bolted to the foundation base at each post. The roof skeletal structure is made of MS pipes and installed on the posts. The roof is made of polycarbonate sheets and will be installed on the MS frame work & MS work finished by (MCM Cladding) over a coat primer including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 107 | Supplying, fitting and fixing of M.S welded grills/gate work in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. |
| 108 | Providing and fixing 25mm thick Khondolite stone Skirting & Cladding (sample of Khondolite stone should be approved by Architect/ Engineer-In-Charge) for wall surface and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge & approved groove pattern etc.with Chemical Adhesive and jointing with coloured Chemical Grout including pointing (if required) pigment of matching shade, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge/Architects. |
| 109 | Providing & laying 25 mm thick calibarate natural Granite cobble stone in CM(1:4) including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 110 | Supplying and laying of M40 grade heavy duty factory made hydraulically pressed and mechanically compacted free cast interlocking pavers of 60mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. |
| 111 | Landscape |
| 112 | Supply of Bali Green stone Pots(42''height) with decorative plants including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 113 | Supply of Bali Green stone Pots(24''height) with decorative plants including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 114 | Supply of Classic grey marble Pots(18''x18''x48'') with decorative plants including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 115 | Supply of Classic grey marble Pots(18''x18''x36'') with decorative plants including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 116 | Supply of Classic grey marble Pots(18''x18''x24'') with decorative plants including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 117 | Supply of Classic grey marble Pots(15''x15''x15'') with decorative plants including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 118 | Supply of Classic grey marble Pots(18''x18''x18'') with decorative plants including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 119 | Supply of Classic grey marble Pots(21''x21''x21'') with decorative plants including cost,conveyance,royality of materials & cost of all labour,T&P etc complete in all respect as per direction of Engineer-in-charge/Architects. |
| 120 | PH Works |
| 121 | Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted rimless water closet of Hindware make having cat no 92528 or equivalent type of approved make including supply of matching P/S trap to the wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, 15mm dia connection pipe ALD 803 AB, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. |
| 122 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware Table top wash hand basin of size 54x42x16.5cm dia of Hindware make having cat no 91046 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. |
| 123 | Supplying and fixing sensor urinal of size 37x39x61cm of Hindware make having cat no 60018 and division plate 61001 or equivalent of approved make including all fittings like 450mm long connection pipe, waste coupling nut, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. |
| 124 | Supplying all materials, labour, T&P and fixing standard sized Bib cock short body of Jaquar Cat. No.-KUP-35037PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 125 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-KUP 35053PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 126 | Supplying all materials, labour, T&P and fixing standard sized CP Soap case of Jaquar Cat. No.-AKP 35731P or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 127 | Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.-AKP 35721P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 128 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail - 24\\" of Jaquar Cat. No.-AKP 35711PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 129 | Supplying all materials, labor T&P for fitting and fixing in all floors' fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. |
| 130 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of Jaquar Cat. No.-KUP-35001PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 131 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia basin mixer of Jaquar Cat. No.-KUP 35011KPM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 132 | Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-KUP 35041PM or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 133 | Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 134 | Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-AKP 35771P or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 135 | Supplying all materials, labour, T&P and fixing toilet paper holder of Jaquar Cat. No.-AKP 35753PS or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 136 | Supplying all materials, labour, T&P and fixing standard sized CP robe hook of Jaquar Cat. No.-AKP-35791P or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 137 | Supplying all material, labour T&P and fixtures for providing and fixing of stain less steel sink of size 915x510mm of NIRALI (Elegance Ultra) or equivalent type of approved make with its components like 40mm CP waste of cat no ALD 709, 40mm waste pipe etc, including all requisite fixing materials complete as per the PH specification and direction of Engineer-in-charge |
| 138 | Supplying all materials, labour, T&P and fixing standard sized sink cock of Jaquar Cat. No.-KUP-35021PM or equivalent type of approved make of Hindware / Parryware make complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 139 | Providing and fixing circular type stainless steel jalli (grating) with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 140 | Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. |
| 141 | 20 mm dia |
| 142 | 25 mm dia |
| 143 | 32 mm dia |
| 144 | 40mm dia |
| 145 | 50mm dia |
| 146 | Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. |
| 147 | 25 mm dia |
| 148 | 32 mm dia |
| 149 | 40mm dia |
| 150 | 50mm dia |
| 151 | Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. |
| 152 | 75mm dia |
| 153 | 110mm dia |
| 154 | Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 155 | 110mm dia Single Junction with door |
| 156 | 110mm dia Double Junction with door |
| 157 | 110mm dia Cowl |
| 158 | 110mm dia Plain Bend |
| 159 | 110mm dia SWR Door Bend |
| 160 | 125mm x 110mm Gulley Trap |
| 161 | 110mm dia Tee with door |
| 162 | 110mm dia Pipe clip |
| 163 | 75mm dia Plain Bend |
| 164 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 165 | Supplying all materials,labours,T&P for cutting holes (250-375)mm thickness through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 166 | Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. |
| 167 | Providing all materials, labour, T&P required for Chemical Anchoring of required diameter as per drawing and direction of Engineer-in-charge. |
| 168 | 12mm Dia |
| 169 | 10mm Dia |
| 170 | Providing 20mm thick and above 0.40 Sqm size granite tile flooring in platform, staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 171 | Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havells/KEI/Eq) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Panasonic Vision/Eq) |
| 172 | GROUP-A |
| 173 | GROUP-B |
| 174 | GROUP-C |
| 175 | Recessed wiring to secondary light point looped from primary light point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr |
| 176 | Recessed wiring to ceiling fan point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group c |
| 177 | Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/ Finolex/Eq) Group C |
| 178 | Supply and fixing of 5 / 6 amp socket outlet with 6 Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge. |
| 179 | Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire KEI /Polycab/ Anchor / Havels/ Finolex /Eq) |
| 180 | Supply and fixing of 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 181 | Supply and fixing of 1x 6 + 1x16 amp socket outlet controlled by 1x 6 + 1x16 amp 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 182 | Supply and fixing of 6 pin 16 amp socket outlet with 16 Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. |
| 183 | Supply and fixing of 6 pin 16 amp socket outlet ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. |
| 184 | Supply and fixing of 32 amp Modular DP switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge. |
| 185 | Recessed wiring of modular type 1500mA, 5V Type-A USB CHARGER 1M with 6A 250V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size, including all accesories and connection on existing switch board as per direction of Engineer in Charge. (Make- Schneider (Zencelo) / Legrand (myrius) /Panasonic (Europa)/Havells(Equivalent model) or equivalent) |
| 186 | Supply and fixing of 3 x 6 amp socket outlet controlled by 2 nos 6 Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 187 | Supply and fixing of TV/ Telephone point on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 188 | Supply and fixing of Call bell point on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge. |
| 189 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/ Polycab / HAVELLS /RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 190 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/ Polycab /HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 191 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/ Polycab/ HAVELLS/ RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5) |
| 192 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5) |
| 193 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (4X4+1X2.5) |
| 194 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (4X6+1X2.5) |
| 195 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 4 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (4X10+1X4) |
| 196 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. Cat 6 Lan Cable |
| 197 | Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions. |
| 198 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63Amp / 40Amp FP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) |
| 199 | Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door Vertical type powder coated wall mounted 4 way Vertical TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A/63A/80A/100A FP MCCB (25KA) Outgoings-10/16/32A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq) |
| 200 | FITTING & FIXTURE |
| 201 | Supply, Installation, Testing and Commissioning of Plastic body Exhaust fan 200 mm sweep 900 rpm with louvers of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj). |
| 202 | Supply, Installation, Testing and Commissioning of Metal body Exhaust fan 380 mm sweep 1400 rpm vheavy duty of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/ Crompton/ Usha/ Orient/Bajaj). |
| 203 | Supply, Installation, Testing and Commissioning of 1200 mm sweep 4 blades Decorative ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells Florence/Crompton /Usha/Orient /Bajaj). |
| 204 | Supply, Installation, Testing and Commissioning of 1200 mm sweep Decorative ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells SS390 /Crompton /Usha/Orient /Bajaj). |
| 205 | Supply, Installation, Testing, and commissioning of decorative Wall fan 300mm sweep,110watt, 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells/ Crompton /Usha/Orient /Bajaj) |
| 206 | Supply, Installation, Testing, and commissioning of decorative pedestal fan 450mm sweep,120watt, 230/250 volts, 50HZ complete with suitable, clamp, downrod (as per site requirement), blades, canpoy, rubber, shackle, and connections with 1.5 sq.mm PVC insulated copper conductor cable etc as required of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells - V2 Neo/ Crompton /Usha/Orient /Bajaj) |
| 207 | Supply, Installation, Testing and Commissioning of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 208 | Supply, Installation, Testing and Commissioning of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 10 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 209 | Supply, Installation, Testing and Commissioning of 36 watt 2' x 2' LED Ceiling Recessed mounted luminaire with high performance LEDs is made of sheet steel housing and suitable for mounting in Armstrong/Grid ceiling.of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 210 | Supply, Installation, Testing and Commissioning of 9 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 211 | Supply, Installation, Testing and Commissioning of 12 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 212 | Supply, Installation, Testing and Commissioning of 8 watt LED COB DOWN LIGHT with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Havells /Panasonic/LT/ Philips/Wipro /K lite/Crompton/Bajaj). |
| 213 | Supply, Installation, Testing and Commissioning of 3 watt LED Ceiling Recessed mounted spot light in different Colour Aesthetically designed lens based of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 214 | SITC of Profile light, LED Strip for profile lighting with aluminium chanel and defuser, long life: 30,000 burning hours, Housing: Superior adhesive for easy and worry-free installation, Other features: 240 LEDs per meter, 900 lumen per meter & comes with a driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 215 | Supply, Installation, Testing and Commissioning of LED Strip light, IP65 protection of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 216 | Supply, Installation, Testing and Commissioning of 18 watt LED Ceiling Surface mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 217 | Supply, Installation,Testing & commissioning of 9W LED Integrated wall Light ( Mirror Light) of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 581916/ Jaquar /Havells /Klite /Phillips /CG/Bajaj) |
| 218 | Supply, Installation,Testing & commissioning of 12W LED Picture Light Chrome finish of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.( Make - Phillips 31440/ Jaquar /Havells /Klite /Phillips /CG/Bajaj) |
| 219 | Supply ,Installation, Testing and Commissioning of Decorative Light, FPI777 / FUEGO SEMI RECESSED / 7W / RD / BK / LED / 3000K / SPOT LIGHT of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. .(Make - Futura Lighting) |
| 220 | Supply ,Installation, Testing and Commissioning of Decorative Light, FPI506A/ NIYU FIXED/ 4W/ RD/ BK/ LED / 3000K/ COB DEEP RECESSED DARK NIGHT of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. .(Make - Futura Lighting) |
| 221 | Supply ,Installation, Testing and Commissioning of Decorative Light, FPI922/NIYU LINE/6W/REC/BK/LED/3000K/COB DEEP RECESSED DARK KNIGHT-2 of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. .(Make - Futura Lighting) |
| 222 | Supply ,Installation, Testing and Commissioning of Decorative Light, FPPI1558 /KINE /INETRIOR LED STRIP/14.4W/M/WH/80/MTR/LED/300K 5 Mtr long of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. .(Make - Futura Lighting) |
| 223 | Supply ,Installation, Testing and Commissioning of Decorative Light, FPI705/ MAGRO /30W/3000K/SBK/1126x34x100 of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. .(Make - Futura Lighting) |
| 224 | UNDER FLOOR TRUNKING : |
| 225 | Supply delivery and installation of 275 GSM, 25 mm height, 1.6 mm lid, 2.5 mtr length under floor trunking conforming 150 mm 2 compartment structure. (Make : Legrand/ Honeywell ) |
| 226 | Supply delivery and installation of 275 GSM, 25 mm height, 1.6 mm lid,75 mm length joint sleeves compartable for 150 mm 2 compartment under floor trunking. (Make : Legrand/ Honeywell ) |
| 227 | Supply delivery and installation of top recess - 20 mm with metallic lid, height : 90-105 mm access outlet box of size 150 mm x 150 mm having 2 nos 6/6 amp socket, 2 nos 16 amp switch, 1 no RJ 45 socket, 1 no RJ 11 socket. Make : Legrand/ Honeywell |
| 228 | Supply delivery and installation of top recess - 8 mm with metallic lid, height : 55-70 mm crossover junction box of size 150 mm x 150 mm. Make : Legrand/Honeywell |
| 229 | Supply delivery and installation of vertical access box of size 250 mm x 200 mm x 45 mm. Make : Legrand/Honeywell |
| 230 | AIR CONDITIONING: |
| 231 | Supply of Inverter type Variable Refrigerant Volume system with Hermatically Sealed Compressors (all compressors will be inverter type), cooling mode, Top discharge type condenser fan, ODU refnet, air cooled Cu condenser with hydrophilic blue film coated fins, micro processor panel and other standard accessories as per specification. The unit shall be suitable for operation with R 410a refrigerant. (Make:Mitsubishi /Daikin/O General) |
| 232 | Supply of Variable Refrigerant Volume type Indoor Unit comprising of Cu coil section, filter section, micro- processor type PCB. The unit shall be ceiling suspended type and complete with all standard accessories. Unit shall be compatible with running condition of 230V-1Ph-50Hz electrical supply including supply of Cordless remote .Unit shall be VRV CASSETTE AC of following capacity (Make:Mitsubishi /Daikin/O General) |
| 233 | 1.5 TR |
| 234 | 2.5 TR |
| 235 | Supply of IDU Y joints / Distribution joints. |
| 236 | Supply of ODU Y joints / Distribution joints. |
| 237 | Supply of Cordless Remote |
| 238 | Installation, testing and commissioning of the above VRV outdoor units with R410A refrigerant, controls, electricals, necessary accessories. Capacities of VRV- 28 HP Outdoor |
| 239 | Installation, testing and commissioning of all above VRV indoor units with refrigerant, controls, electricals, necessary accessories etc. |
| 240 | Supply, installation, testing and commissioning of PVC pipe medium class (for drainage of water from IDU) with 6 mm thick Nitrile Rubber insulation. |
| 241 | Supply & Laying of Cu scheilded flexible communication cabling between ODU and IDU as per OEM Specification (VRV). Cable shall be laying through hard PVC conduit pipe |
| 242 | Supply & Filling of First charge of Refrigerant R410a |
| 243 | Supply, installation, testing and commissioning of Cu. refrigerant pipes (requried as per OEM design) duly insulated with 19mm / 13mm close cell elastometric nitrite rubber insulation between each set of outdoor and indoor units (VRV). |
| 244 | 41.1 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 245 | 38.1 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 246 | 34.1 mm O.D. (with 19 mm insulation) |
| 247 | 31.8 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 248 | 28.58 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 249 | 25.4 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 250 | 22.2 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 251 | 19 mm dia (OD) (Harddrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 252 | 15.86 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 253 | 12.7 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 254 | 9.5 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 255 | 6.4 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19mm thick insulation |
| 256 | Supplying, storing, laying, testing and commissioning of 4 c x 6 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 257 | Supplying, storing, laying, testing and commissioning of 4 c x 10 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 258 | Supplying, storing, laying, testing and commissioning of 4 c x 16 Sq. mm armoured Copper Cable direct in ground including excavation , sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 259 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/coke and salt) as required. |
| 260 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 261 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 262 | Fire Fighting System |
| 263 | Supply of 32 bit Duel Core Microprocessor based 100% Hot Redundant Intelligent Addressable Multi-loop Fire Alarm Control panel. The panel shall have single mode duel redundant network card having on board single mode fiber connectivity port, RS485 port & TCP/IP. Panel shall be expandable minimum 14 loops without changing the cabinet. The panel would be modular, decentralized, with 100% hot redundancy in cpu/master control unit, 100% hot redundancy in loop cards, relay and interface card by means of duplicated electronic means, hardware redundancy with full functionality.The panel shall be consisting with minimum 240 character LC display. The Panel shall be able to record atleast 50,000 events history. Each loop shall be capable to have atleast 250 addressable detectors and addressable devices (any combination) with up to 3.5 km loop length of approved make complete with all materials as required as per the direction of Engineer-in-Charge. (Make - UL Listed / VdS ) |
| 264 | 4 Loop Panel (without network card) |
| 265 | Supply of Intelligent Addressable type multisensor detector (Photo + Fixed Tempt. + Rate of Rise Tempt.) with base for use as heat or smoke or combined both automatic electronic addressing, microprocessor type with built in integrated short circuit isolator with operating tempurature from -20⁰C to + 60⁰C. Detector shall have auto learn, drift compensation etc of approved make complete with all materials as required as per the direction of Engineer-in-Charge. (Make - UL Listed / VdS ) |
| 266 | Supply of Intelligent Addressable break glass type Manual Call Point having inbuilt short circuit isolator & LED indicator with back box of approved make complete with all materials as required as per the direction of Engineer-in-Charge. (Make - UL Listed / VdS ) |
| 267 | Supply of Hooter cum Strobe of approved make complete with all materials as required as per the direction of Engineer-in-Charge. |
| 268 | Supply of Intelligent Addressable Control module with IP66 casing containing four relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C. for AHU/ Fire Dumper Integration wof approved make complete with all materials as required as per the direction of Engineer-in-Charge. (Make - UL Listed / VdS ) |
| 269 | Supply of Intelligent Addressable Control module with IP66 casing having 2 addressable inputs, one addressable output & one opto coupler input for addressable output monitoring for integration with beam detector, other conventions sensor of approved make complete with all materials as required as per the direction of Engineer-in-Charge. (Make - UL Listed / VdS ) |
| 270 | Supply of 2 core x 1.5 sq. mm copper FRLS Armoured cable with necessary fittings etc of approved make complete with all materials as required as per the direction of Engineer-in-Charge.. |
| 271 | Supply of Detector Mounting JB and other accessories of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 272 | Providing of Cable laying in cable tray/ surface etc complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 273 | Installation, Testing , Commissioning & Programming of Fire alarm system.detector, devices and other sensors & accessories etc complete as required as per the direction of Engineer-in-Charge. |
| 274 | Internet |
| 275 | Supply and installation of WIFI Access Point make-Grandstrem |
| 276 | Supply, installation and commissioning of Layer2 24port 10/100/1000Mbps BaseT IEEE 802.3af PoE (Min.195 Watt Budget) ports and 4x 1G base SFP Fully Managed switch with Over the Air Management for CLI and GUI Access. Make: D-LINK/ HP/ Digisol. |
| 277 | Supply, installation and commissioning of SRJ-45Jack of Category 6 with Dual-port British-style Face plate 86x86 mm with Curveture and wall mount box. Make: Tyco-AMP/ Legrand/ Digisol. |
| 278 | Supply and laying of Cat 6 4-pair 23AWG LSZH UTP Cable for data and voice in conduits/trunking. Make: Tyco-AMP/ Legrand/ Digisol. |
| 279 | Supply and Laying of 6 Core Single Mode(OS2) Unitube Armoured Optic Fiber Cable in existing conduits. Make: Tyco-AMP/ Legrand/ Digisol. |
| 280 | Supply, installation and commissioning of Fiber Optic Single Mode OS2 SC-LC, Duplex Patch Cords, 3mtr length. Make: Tyco-AMP/ Legrand / Digisol. |
| 281 | Supply and installation of 4U wall mount Net Rack etc complete |
| 282 | Supply, Installation, Testing and commissioning of 2 X 1.5 sq mm multi strand white sheath PVC insulated armoured copper cable(FR) to be laid in side 20 mm PVC conduits along with TEES, Bends, saddles and other fittings as required to make the system complete. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
