|
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. (subject to actual measurement at site) |
| 2 | Dismantling of CGI roofing sheets Huts pre Yatra including stacking at SASB store.(subject to actual measurement at site) |
| 3 | Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm+/-5% total coated thickness (TCT), Zinc coating 120 gsm as per IS:277 in 240 mpa stee grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer –in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5 x 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(subject to actual measurement at site) |
| 4 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) (subject to actual measurement at site) |
| 5 | Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm)(subject to actual measurement at site) |
| 6 | Painting with synthetic enamel paint of aPPRoved brand and manufacture of required colour to give an even shade, one or more coats on old work. (subject to actual measurement at site) |
| 7 | Engagement of labour for the repair and renovation to huts and offices including cleaning of huts shifting of beddings and other material from store to huts and back to store post conclusion of yatra ,repair to damaged trusses,ceiling ,roof, wallings,door ,windows,sanitary fitting ,welding,refursbishing,welding and fitting/repairs of bunk beds etc. (as per actual) |
| 8 | Helper. |
| 9 | Welder. |
| 10 | Carpenter. |
| 11 | Plumber. |
| 12 | Electric fitter. |
| 13 | Supply of items for baltal subject to actual measurements at site . All fittings as per requirements on direction of engineer-in-charge.(subject to actual measurement at site) |
| 14 | Beadings. |
| 15 | Cornice. |
| 16 | 15mm PTMT Bib cock. |
| 17 | Oxidised mild steel door latch. |
| 18 | 4mm teak ply (one side laminated) with necessary accessories including nails etc. |
| 19 | Pvc pipe connection. |
| 20 | Led bulb 8watt. |
| 21 | Angle holder. |
| 22 | 2 way gang box pvc. |
| 23 | 3way gang box pvc. |
| 24 | wire 1.5mm. |
| 25 | wire 2.5mm. |
| 26 | Switch 6amp. |
| 27 | M seal. |
| 28 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required . White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap.(subject to actual measurement at site) |
| 29 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.(subject to actual measurement at site) |
| 30 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 20mm OD(SDR-7.4)(subject to actual measurement at site) |
| 31 | Providing and laying in position cement concrete of specified grade including curing excluding cost of centring and shuttering all works up to plinth level.1:4:8(1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) nallah stone |
| 32 | Preparation of subgrade by excavating path to an average of 15 cm depth, dressing to camber and consolidation with roller including making good the undulation etc. and disposal of surplus at designated site as per direction of engineer-in-charge. Please Enable Macros to View BoQ information |
