Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-04-2026 | 2ND CORRIGENDUM | Date | 13-04-2026 |
| 2 | 25-03-2026 | 1ST CORRIGENDUM | Date | 06-04-2026 |
| 3 | 25-03-2026 | 1ST CORRIGENDUM | Date | 06-04-2026 |
| Sl. No. | Item Description |
| 1 | Reclamation:Filling with Good earth and spreading the lower area of reclamation zone to acheive the design formation level of R.L. + 3.60m with using hydraulic excavator, tipper & dozer to spreading and compaction with vibratory roller & OMC condition till the desired density is attend inclduing hire charges etc. complete as per direction of Engineer-in-charge. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. |
| 2 | Reclamation : Fine dressing of earth work in ordinary or hard soil in road formation according to the direction of the department including cutting or filling earth upto 0.15m depth of surface. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. |
| 3 | Reclamation : Filling in foundation and plinth with filling sand, watered and rammed. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. |
| 4 | Earth work in excavation of foundation trenches in all kind of soil including moorum stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and levelling the bed up to 1.50M depth and depositing the excavated materials away from the work site with all leads and lifts .Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in all respect as per the direction of Engineer in charge. Quay -Diaphragm wall , Beach revetment, Main track, Repair track, RC sloping hard, Vehicle parking areas in concrete surface, CC surface, Internal roads, Fish Merchants Dormitory, Fish handling and auction hall, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet,Market complex, Guard House, Winch house, Fresh water over head tank, Sea water over head tank, Fresh water underground sumps, Drainage and Sewage treatment plant |
| 5 | Earth work in excavation of foundation trenches in ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. WBM surface |
| 6 | Earth work in ordinary soil within 50m, initial lead and 1.5m, initial lift including rought dressing not exceeding 0.3m in depth. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. ETP, STP & SWD |
| 7 | Shift and set up piling plant & equipment at each pile location as per the direction of Engineer-in-charge. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge., Quay, Dormitory, Auction hall, Admin, radio communication tower, Gear shed, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet,Market complex, Fish merchent hall, Guard House, Fresh water over head tank, Sea water over head tank |
| 8 | Providing, fabricating and delivering to the site 6mm thick MS plates liners of 450 diameter for bore piles, including cost of material, welding, labour and transportation etc. complete as per direction of the Engineer-in-charge. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Dormitory, Auction hall TV, Admin, Gear shed, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet,Market complex, Fish merchent hall, Guard House, Compound wall |
| 9 | Providing, fabricating and delivering to the site 6mm thick MS plates liners of 600 diameter for bore piles, including cost of material, welding, labour and transportation etc. complete as per direction of the Engineer-in-charge. Quay -Diaphragm wall , Auction hall MFV, Fresh water over head tank, Sea water over head tank, Radio Communication tower |
| 10 | Driving of steel liners for cast in situ bore piles upto specified depth including pitching of liners using GPS, welding, jointing etc. using pile driving rig and other mechanical equipments, cutting down extra length not required etc. complete for 450 mm dia. liners etc. complete as per direction of the Engineer-in-charge. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Fish Merchants Dormitory, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Fish merchent hall, Guard House, Winch House |
| 11 | Driving of steel liners for cast in situ bore piles upto specified depth Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect, pitching of liners using GPS, welding, jointing etc. using pile driving rig and other mechanical equipments, cutting down extra length not required etc. complete for 600 mm dia. liners etc. complete as per direction of the Engineer-in-charge. Quay -Diaphragm wall , Auction hall MFV, Fresh water over head tank, Sea water over head tank, Radio Communication tower |
| 12 | Providing and laying in position plain cement concrete of mix M10 with OPC cement @ 180 kgs with 40mm and down size graded granite metal coarse aggregates @ 0.85cum and fine aggregates @ 0.57cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Quay -Diaphragm wall , Main track, Repair track, Vehicle parking areas in concrete surface, CC surface, Internal roads, Fish Merchants, Dormitory, Fish handling and auction hall, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Market complex, Guard House, Winch house, Fresh water over head tank, Sea water over head tank, Fresh water supply, ETP, STP & SWD |
| 13 | Cut & dress top portion of D-wall to attain green concrete upto required lines & levels etc. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge..Quay -Diaphragm wall |
| 14 | Constructing cast-in situ RCC diaphragm wall by providing and laying machine batched, machine mixed, self compacting, ready mix reinforced cement concrete, tramie controlled, of M 30 grade using minimum 400 kg cement per cum of concrete including providing and mixing required admixtures in recommended proportions as per IS : 9103, as approved by the Engineer-in-charge, for achieving 150- 200mm slump, for diaphragm wall having thickness as per approved structural design not exceeding 600 mm, in pannels of required depth and lengths as per approved drawing, including constructing necessary guide walls as required and as specified including boring in all kinds of soils and rocks, including working in or under water and / or liquid mud, in foul conditions and pumping or bailing out of water and removing slush, including disposal of earth/ rock / slush etc. for all leads and all lifts, including preparing, providing and re-circulating bentonite slurry in the trench as and when required for all depths, including agitating bentonite slurry during trenching etc., providing and fixing stop ends or form tubes, upto the required depth of diaphragm wall including extracting the same after casting, including chipping off the bentonite adulterated concrete or unsound concrete up to the cut off level for obtaining the sound concrete, dressing undulations on the exposed face of diaphragm wall after excavation by chipping / chiseling etc. including filling the depression/ cavities with sound concrete etc. complete and as directed by the Engineer-in- charge, but excluding the cost of reinforcement and inserts. (rates include cost of all inputs of labour, material and T & P, cost of handling, lifting & placing in position the reinforcement cage in the trench, including the additional cost of welding the reinforcement bars etc. involved in the work and all other incidental expenditure for completing the work as directed by the Engineer-in-charge),Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Quay -Diaphragm wall |
| 15 | Boring through all type of soil strate including silty clay or silty sand and compact fine to medium sand (Rate include removal of excavated materials clearing base, taking all necessary measures to retain sides and prevent recking of pile) from cut off level to (-) 12.5m level. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Quay wall, Fish Merchants, Dormitory, Auction hall, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Market complex, Fresh water over head tank, Sea water over head tank, Radio Communication tower, Compound wall |
| 16 | Providing and laying design mix cement concrete M35 grade using minimum cement 450 kg/Cum and graded crushed stone aggregates 20mm nominal maximum size for RCC bored cast-in-situ piles excluding the cost of reinforcement but including lowering of reinforcement while concreting and using tremie pipe all as per drawing and technical specifications as per direction of Engineer-in-charge. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Renovation of wall, Quay -Diaphragm wall , R.C. sloping hard and ramp, Main track, Repair track, Fish Merchants, Dormitory, Fish handling and auction hall, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet,Market complex, Guard House, Fresh water over head tank, Sea water over head tank, Winch house, Compound wall. |
| 17 | R.C.C. work of M-30 grade having minimum compressive strength in work test of 300 Kg / Cm2 in 15 cm. cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 12 to 20 mm size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering, shuttering (Average of all components) laying concrete and compacting by using vibrators watering and curing for 4 weeks and finishing the exposed surface smooth providing grooves or beads where ever necessary in all floors including cost, conveyance, royalties and taxes of all materials, cost of all labour, labour cess, T&P required for the work etc. complete in all respect as directed by the Engineer in-charge. Fish Merchants, Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Fresh water storage over head tank, Sea water over head tank, Fresh water supply, winch house, STP, ETP & SWD |
| 18 | Providing and laying cement concrete wearing course M 30 grade including Reinforcement complete as per Drawing and technical specificatios clauses 8900 & 1206.3 ( 75 mm thick ( Avg). Quay wall & Compound wall |
| 19 | R.C.C. work of M-20 grade having minimum compressive strength in work test of 300 Kg / Cm2 in 15 cm. cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 12 to 20 mm size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering, laying concrete and compacting by using vibrators watering and curing for 4 weeks and finishing the exposed surface smooth providing grooves or beads where ever necessary in all floors including cost, conveyance, royalties and taxes of all materials, cost of all labour, labour cess, T&P required for the work etc. complete in all respect as directed by the Engineer in-charge.Internal road, Vehicle parking, CC Surface, Beach revetment & Restaurant building |
| 20 | Rigid smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting in all floors & all heights including cost, conveyance, royalties, taxes of all materials, cost of all labour, labour cess, T&P required for the work etc. complete in all respect as directed by the Engineer-In-Charge. in Ground floor Renovation of wall & Quay wall |
| 21 | Ground floor: R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc. Fresh water storage over head tank, Sea water over head tank, STP, ETP & SWD |
| 22 | R.C.C. Beams, columns, grider and bressmer etc.Compound wall, Fresh water storage over head tank, Sea water over head tank, STP, ETP & SWD |
| 23 | R.C.C. Floor and Roof slab, landing, balconies, projecting, sun shades and chajjas up to 4.3Mtr. Height.Interior road, Fresh water storage over head tank, Sea water over head tank, Fresh water supply |
| 24 | RCC StaircaseFresh water storage over head tank |
| 25 | Supplying, Cutting, Straightening coiled or bent up M.S. rods or Tor steel of SAIL(HYSD Fe-500) welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer-in-charge All reinforcement steel and structural steel shall be procured from primary producers of steel-SAIL/RINL/TATA/JINDAL (Panther)/SHYAM STEEL. Quay -Diaphragm wall , Beach revetment R.C. sloping hard and ramp, Main track, Repair track, Vehicle parking areas in concrete surface, CC surface, Internal roads, Fish Merchants, Dormitory, Fish handling and auction hall, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet,Market complex, Guard House, Fresh water over head tank, Sea water over head tank, Compound wall, Winch house, Fresh water supply, STP, ETP & SWD |
| 26 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T & P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres complete as per specifications.) Lime / Cement Concrete. I. By Manual Means: A Lime Concrete, cement concrete grade M-15 and below. MORTH Specification No. 202i) Lime / Cement Concrete. I. By Manual Means: B cement concrete grade M-15 & M-20Existing Quay walls (top) & existing buildings |
| 27 | Providing fitting fixing of cast iron bollard 10 ton including cost, conveyance royality and taxes of all materials complete as per specification & specified drawing and direction of Engineer in Charge. Quay -Diaphragm wall |
| 28 | Providing fitting fixing of M.S Fender Hook with 6 mm M.S plate and 10mm gusset plate embeded in R.C.C beam/column at suitable location with cost of including cost, conveyance royality and taxes of all materials complete as per specification & specified drawing and direction of Engineer in Charge. Quay -Diaphragm wall |
| 29 | Providing fitting fixing of 20 x 200 mm Dia M.S Mooring Ring with 6 mm M.S plate and 10mm gusset plate embeded in R.C.C beam/column at suitable location with cost, conveyance royality and taxes of all materials complete as per specification & specified drawing and direction of Engineer in Charge.Quay -Diaphragm wall & Beach revetment |
| 30 | Supplying and fixing in position used DD type rubber fender having size of 200 x 200 x 100 x 100 mm long 500 mm with predrilled holes including necessary fixture complete in all resects as per drawing, specification and direction with all material labour and equipments. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.Quay -Diaphragm wall |
| 31 | Providing and fixing weep holes of 80mm dia PVC pipes at 1m c/c in two rows as per drawing for diaphragm wall, etc., complete.Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.Quay -Diaphragm wall |
| 32 | Providing and laying of boulder apron laid in wire crates with 4mm dia GI wire conforming to IS 280 and IS: 4826 in 100 mm x 100mm mesh (woven diagonally) including 10 percent not less than 25 kg each as per drawing and technical specification clause 1301. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.RC Sloping hard |
| 33 | Providing and laying of Filter media with granular materials / stone crushed aggregates satisfying the requirements laid down in clause 2500.4.2.2 of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification complete as per specifications. MORTH specification No. 710.1.4 of IRC: 78 & 2200.Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Quay-Diaphragm Wall |
| 34 | Providing and laying Woven polypropylene multi filament yarn geosynthetic mat with opening size 75 microns (0075 mm) and water permeability more than 9 liters/sqmm/second to retain D85/D10 grain size of paeticles of beach materials to the formation and grade as per drawing Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Beach Revetment |
| 35 | Suppplying and laying up to 10 kg granite stones with specific gravity of not less than 2.65 including cost and conveyance from quarry to site, loading and unloading charges and spreading in uniform layers at an average thickness of 0.60 m in sea in all tides and weather conditions for forming the secondary layer of breakwater / guide band as per the appproved drawing including hire and operational charges of crane,floating crafts,tools and plants,divers,etc complete as per the direction of Engineer incharge of the work Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Beach Revetment |
| 36 | Suppplying and laying up to 50 kg granite stones with specific gravity of not less than 2.65 including cost and conveyance from quarry to site, loading and unloading charges and spreading in uniform layers at an average thickness of 0.60 m in sea in all tides and weather conditions for forming the secondary layer of breakwater / guide band as per the appproved drawing including hire and operational charges of crane,floating crafts,tools and plants,divers,etc complete as per the direction of Engineer incharge of the work. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Beach Revetment |
| 37 | Suppplying,placing and forming primary armour layer of breakwater/guide band using granite blasted rock of size 100 to 200 kg having specific gravity of not less than 2.65 and stones,as nearly as cubical as possible as per approved designed including cost and conveyance from quarry to work site, loading and unloading charges and placing in position in layers using cranes,floating equipments, tools and plants,divers,etc to lines and levels as per approved design and drawing to form the primary armour over the secondary armour laid including packing stones neatly etc, complete as per the direction of Engineer incharge of the work.(Approved data rate) Beach Revetment |
| 38 | P.C..C with Fibre Reinforced Concrete of M-20 grade minimum compressive strength in work test of 200 Kg/Cm2 in 15 cm. cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 12 to 20 mm size black hard crusher broken granite stone chips including cost of all materials, labour with T&P required for the work etc. complete as per direction of Engineer-in-charge Beach Revetment |
| 39 | Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge.Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.Quay -Diaphragm wall, Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Fresh water storage over head tank, Sea water over head tank |
| 40 | Providing and laying Geo textile filter cloth 450 GSM of approved make including Cost, conveyance, royalties, taxes etc. and all labour , T&P required complete in all respect as per direction of Engineer-in-charge. Quay- Dwall, Main track, Repair track, Sloping hard |
| 41 | Providing and laying Soiling stone including Cost, conveyance, royalties, taxes etc. and all labour , T&P required complete in all respect as per direction of Engineer-in-charge. Main track & Repair track |
| 42 | Laying of rail line with proper allignment, Fitting & Fixing of Base Plate (300 X 200 X 20 ) mm with 4 Nos. of Hole (23 mm dia), Rail Cleat (Rail Clamp), Anchor Bolt (M20) of 380 mm fixed with (50 X 50 X 6) mm Base Plate & 125 mm Threaded with bolt & washer as per site requirement including cost of material, Conveyance, labour, labour cess, painting, taxes as per specification and direction of EIC Charge. Main track & Repair track |
| 43 | Providing Steel Craddle using ISHB 350, ISMB 300, ISMB 200, 80 mm dia shaft, 400mm dia wheel , wheel support bracket, keeper plate, bush, fastner, rubber padding, stud link chain , bilge blocks , keel and blige blockls including cost , fabrication, erection at site , conveyance, taxes as per requirement , specification and direction of engineer in charge.Main track & Repair track |
| 44 | Supplying and spreading sand of approved specification for sand bed filling filter in rock toe riprap and filter drains in earth dam and dyke to proper slope and level within an initial lead as directed by the Engineer-in-charge. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Sloping Hard |
| 45 | Providing & laying precast ,precured Cement Concrete [1: 1.5 :3 ] kerb stone [400 x300x150mm] of approved quality and of approved specification including cost, conveyance & taxes of all materials, cost of all labour, all T&P etc. required for the work. complete in all respect as directed by the Engineer-in-charge Internal roads, Vehicle parking, CC surface |
| 46 | Random rubble H.G. stone masonry in cement mortar (1:6) in foundation and plinth. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.Market complex, Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House |
| 47 | Internal concrete road including storm drain: Providing & laying 9” thick compacted to 6” thick sub-base by using moorum & sand admixture (Moorum-70% & sand 30%) of approved quality and from approved quarry in layers not exceeding 225mm watering and compacting to the required density in O.M.C with Vibratory Roller including cost of all materials etc. complete in all respect as directed by the Engineer –in-charge. Vehicle parking areas in concrete surface, CC surface, Internal asphalt roads, WBM Surface |
| 48 | Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision) Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.Vehicle parking areas in concrete surface, CC surface, Internal asphalt roads, WBM Surface |
| 49 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works (4th Revision).Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.R.C. sloping hard , Vehicle parking areas in concrete surface, CC surface, Internal asphalt roads, WBM Surface |
| 50 | Providing & fixing of water proof separation membrame of 125 micron thick including cost of all mateials, taxes etc. complete as per direction of the Engineer-in-charge.Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.Vehicle parking areas & CC Surface |
| 51 | Providing & fixing of 25mm thick bituminous expansion joint board (I.S.I) in expansion joint of approved quality and of approved specification including cost, conveyance & taxes of all materials, cost of all labour, all T&P etc. required for the work. complete in all respect as directed by the Engineer-in-charge.Vehicle parking areas in concrete surface, Fish loading area in concrete surface |
| 52 | Brick work with Fly Ash.Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:4) in Foundation & plinth including cost, conveyance, royalties, taxes of all materials etc. required for the work complete in all respect as directed by the Engineer –in-charge.Internal asphalt roads, Fish Merchants, Dormitory, Auction hall, Radio Communication Tower, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, MArket Complex, Restaurant, Public toilet, Guard House, Compound wall, STP,ETP&SWD, Winch house |
| 53 | Brick work with Fly Ash.Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:4) in superstructure including cost, conveyance, royalties, taxes of all materials etc. required for the work complete in all respect as directed by the Engineer –in-charge.Restaurant, Public toilet, Guard House & Compound wall |
| 54 | Cut & dress each pile head to attain the Sound concrete upto required lines & levels etc. complete as per direction of the Engineer-in-charge. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Quay wall, Fish Merchants, Dormitory, Auction hall, Radio Communication Tower, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Market Complex, Restaurant, Public toilet, Guard House, compound wall, Winch house, Freshwater overhead tank & sea water overhead tank |
| 55 | Staging the water front area with earth filling and bullah piling, sand bag filling to make convinient for setting up piling plant & equipment up to a level of +3.60m (HWL)for construction of water front structure. Dwall |
| 56 | Painting 2 coats with any approved enamel paint over one coat with any approved primeron new/old wood work including cost of paint & labour, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Fish Merchants, Dormitory, Radio Communication Tower, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Market complex, Winch house |
| 57 | Supplying, fitting and fixing 25 mm thick factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of required size fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all complete as per direction of engineer in charge. Dormitory, Auction hall, Administrative building, Rest sheds, Boat repair shop, Market Complex, Restaurant, Public toilet, |
| 58 | Supplying fitting, fixing of Teak wood wooden beading of size(0'-2\\" x 0'-3/4\\") of approved make and quality in all floors including cost of all materials, all labour, all T&P, Cess as applicable etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House |
| 59 | Poly Vinyl Chloride (UPVC) (FENESTA / NOL VEKA LTD) Casement Window with top fixed-60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55mmx2.5 mm for outer frames. 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 4 mm thick hexagonal aluminium jali/ 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Compound wall |
| 60 | Supplying, fitting, fixing of Vitrified tiles of approved make and shape Above 0.40 sqm. (20mm thick) and fixing the same over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry including cost, conveyance and taxes of all materials etc. complete as per the direction of the Engineer-in-charge. Market complex, Dormitory, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant |
| 61 | Supplying, fitting, fixing of M.S grills in windows of approved design and specification by using M.S. flat, angle, square bar confirming to I.S. No. 1977/95 in wooden choukath with necessary nos of screws as may be required including cost, conveyance, taxes of all materials, cost of all labour, T&P etc required for the work complete in all respect as directed by Engineer-In-Charge. Fish Merchants, Market complex, Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Compound wall |
| 62 | Supplying and fitting 30 mm thick WPC door shutter with all labour, iron fittings, and wooden hinged cleats etc. fitted and fixed complete in all respect, with all accessories. Including all cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Compound wall |
| 63 | Supplying and fitting WPC door frame 125 x 62 with all labour, iron fittings, and wooden hinged cleats etc. fitted and fixed complete in all respect. Including all cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Market complex |
| 64 | Supplying and fitting WPC door frame 75 x 45 with all labour, iron fittings, and wooden hinged cleats etc. fitted and fixed complete in all respect, Including all cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Dormitory, Fish handling and auction hall, Administrative building, Rest sheds, Boat repair shop, Restaurant, Public toilet |
| 65 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as per the direction of the Engineer-in-charge. Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Net mending shed, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, winch house, Merchent hall |
| 66 | Supplying, fitting, fixing of MCM cladding and fixing the same over 25mm thick cement mortar (1:1) jointed with neat cement slurry including cost, conveyance and taxes of all materials etc. complete as per the direction of the Engineer-in-charge. Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Market complex, Merchent hall |
| 67 | Providing 12 mm thick plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth including cost, conveyance, royalties and taxes of all materials etc. complete in all respect as directed by the Engineer in charge. Dormitory, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Fish merchent hall, Guard House, Auction hall, Market complex, Fresh water over head tank, Sea water over head tank, Radio Communication tower, Winch house, Compound wall |
| 68 | Providing 20 mm thick plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth including cost, conveyance, royalties and taxes of all materials etc. complete in all respect as directed by the Engineer in charge. Dormitory, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Auction hall, Market complex, Radio Communication tower, Fresh water supply, STP,ETP & SWD. |
| 69 | Providing 2.5cm thick grading concrete (1:2:2) using 6mm. size hard black granite crusher broken chips including mixing, hoisting lowering and laying concrete with watering curing with cost, conveyance royalties and taxes of all materials etc. complete as per the direction of Engineer-in-Charge. Fish Merchants hall, Dormitory, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Fish merchent hall, Guard House, Auction hall, Market complex, Net mending shed, Radio Communication tower, Winch house |
| 70 | Supplying, fitting, fixing of Kota stone in floors of size not less than 0.10 sqm and fixing the same over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry including cost, conveyance and taxes of all materials etc. complete as per the direction of the Engineer-in-charge. Net Mending sheds |
| 71 | Supplying, fitting, fixing of vitrified tile in dados & wall of size (600mm x 600mm - Plain) Marbonite or equivalent make and fixing the same over 12mm thick cement plaster (1:3) jointed with neat cement slurry including cost, conveyance and taxes of all materials etc. complete as directed by Engineer-In-Charge. Fish Merchants hall, Market complex, Dormitory, Radio Communication Tower, Administrative building, Gear sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, winch house |
| 72 | Priming one coat with approved cement primer over the new plaster surface of wall in all height after cleaning the surface including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the work complete as directed by the Engineer- in-Charge. Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Fresh water storage over head tank, Sea water over head tank,, Compound wall |
| 73 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade including all cost of materials & labours etc. complete., conveyance, royalty, taxes, labor T&P required as per direction of Engineer-in-charge. Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Market complex, Fish merchent hall,Guard House, |
| 74 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, etc. as required for the work complete in respect as per the direction of Engineer in charge. Market complex, Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Gear sheds, Net Mending sheds, Rest sheds, Boat repair shop, Restaurant, Public toilet, Merchent hall, Guard House, Compound wall, Fresh water storage over head tank, Sea water over head tank |
| 75 | Construction of inspection chamber 90cm x 90cm x45cm with 25cm thick brick masonry in C.M (1:4) (1 cement : 4 coarse sand) inside plaster 12mm thick in cm (1:4) with a floting coat of neat cement slurry and bed concrete 1:3:6, 10 cm thick including Airtight manhole cover and frame .Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge Dormitory, Administrative building, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House, Auction hall, Radio Communication tower. |
| 76 | Providing up to floor two level precast cement concret: Jali or grill 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm. Nominal size) reinforced with 1.6MM dia mild steel wire including roughening, cleaning, and finishing in cement mortar 1:3 and curing complete. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Gearshed, Boat repair shop & Restaurant |
| 77 | Constructing Septic tank chamber of inside size (2.4x1.2x1.8m) with RCC top slab in RCCM20, foundation concrete (1:3:6), inside & ouside plaster 12 mm thick cement mortar (1:4) finished with neat cement punning, brick work with flyash brick having crushing strength not less than 75kg/cm² with dimensional tolerance ±8 percent in cement mortar (1:4) cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Dormitory, Fish handling and auction hall, Radio Communication Tower, Administrative building, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House |
| 78 | Supplying polythene water storage tank of triple layer & marble finished (Cylindrical Vertical tank) at site including all conveyance upto 250km lend (excluding fitures) and taxes etc. complete in all respect as per the direction of the Engineer-in-charge. Dormitory, Fish handling and auction hall, Administrative building, Rest sheds, Boat repair shop, Restaurant, Public toilet, Guard House |
| 79 | Providing & fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals 20 x 5 mm size, top and bottom rails of T-iron 40 x 40 x 6 mm, and 38 mm dia steel pulleys complete with bolts,nuts,locking arrangements, stoppers, handles including cost of galvanising, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.Administrative building |
| 80 | Providing and fixing rolling shutters of approved make, made of 80 mm wide MS laths interlocked together through their entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft, with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation including the cost of hood cover, spring, galvanising the iron components.Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Fish handling and auction hall, Boat repair shop, Market complex |
| 81 | Desiltation by removing overburden from the harbour basin of F.L.C. as directed by the Engineer in charge using suitable type of dredgers including laying of Shore pipe lines as well as floting arrangements for disposing Overburden slurry consisting other bad materials present in the harbour basin, silt and sand upto 1500mtr. the rate shall include the cost of labour, materials, consumable, P.O.L. other accessories required for running the dedger, tools and plants etc. includign bundign in the island if required by providing coffer dam fir retention of dredged solid materials. the job includes all pre and post survey for payment purpose. Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge.Dwall |
| 82 | Fabricating, supplying and erecting M.S angular Truss of span upto 10m. The bottom and top member is provided with 50x 50 x6mm double equal angles, welded back to back and in between top and bottom line, in areas of mid section is provided with 50 x 50x 6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm singe angle is provided. All the members are welded together with 6mm gusset plate as per Drawing No.CBS/SD/K-Mantap/9/MND/97. The entire truss is anchored in RCC column by using 4 Nos. of M.S anchor bolts at each support, with 10mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S angle and welding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, and hire charges of achineris for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, etc. complete in all respect as per the direction of the Engineer-in-charge. (I.No.7.30 P.No.46) Auction Hall, |
| 83 | Fabrication & erection of G.I pipe trusses of Tata/Jindal medium make having 50m dia of main frame/ 40mm vertical/25 mm bracing including welding, edge cutting & finishing to shape & size with holding down bolt as per drawing, specification and design including cost of all materials labour etc. complete.Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Admin building |
| 84 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect as per the direction of Engineer in charge. Market complex, Admin building, Radiocommunication tower, Fresh water overhead tank & Sea water over head tank |
| 85 | Finishing walls with water proofing cement paint of approved shade on new work two coats to give an even shade including cost of paint.Including cost, conveyance, royalties and taxes of all labour, labour cess, T&P required for the work complete in respect as per the direction of Engineer in charge. Compound Wall |
| 86 | Procurement of 60 Gauge Rail IRST 12/09-R260-60E 1 IU of SAIL make having dimension 150mm base width, 72mm head width, and 172mm height. Minimum Proof Strength of 420 Mpa (HV) and tensile strength of 880 Mpa Hardness 260 with standard length typically ranging from 10-13m. Including transportation and FOR at Destinamtion in all respect as per the direction of the Engineer-in-charge.. Main track & repair track |
| 87 | Fabrication & erection of G.I Gratings for covering of Internal Drain of Tata/Jindaland other ISI make having 25x25x6m GI angle/ 25x6mm GI flat vertically placing @ 50mm c/c including welding, edge cutting & finishing to shape & size as per drawing, design, specification and including cost of all materials labour etc. complete in all respect as per the direction of the Engineer-in-charge.. Auction Hall |
| 88 | Providing fabricating fitting fixing at site stainless steel gate of approved size and specification made out of 304 grade of steel using 50 x 50mm size square hollow bar frame with horizontal and vertical balustrade of (50 x 25) mm square bar @ 150 mm c/c in 6 rows for fixing of main gate as per approved drawing design and specification buffing polishing etc. with cost, conveyance taxes of all materials labour T&P etc. required for the work in all respect as per the direction of the Engineer-in-charge..Compound Wall |
| 89 | Supplying, fitting, fixing ofGranite tiles in floors of size above 0.40 Sqm and fixing the same over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry including cost, conveyance and taxes of all materials etc. complete as per the direction of the Engineer-in-charge. Fish handling and auction hall, Boat repair shop, Compound wall, Merchant hall |
| 90 | Supplying, fitting, fixing of Granite in dados & wall of size (600mm x 600mm - Plain) Marbonite or equivalent make and fixing the same over 12mm thick cement plaster (1:4) jointed with neat cement slurry including cost, conveyance and taxes of all materials etc. complete as directed by Engineer-In-Charge. Fish handling and auction hall & Compound wall |
| 91 | Iron work wrought and put up in grated doors, windows and cage latrines in wooden choukath with necessary no. of screws as may be required including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the work complete in all respect as directed by Engineer-in-charge. Compound Wall |
| 92 | Drilling 40 mm dia holes in masonry or concrete structure with providing and fixing 0.5 M long G.I. pipeline for pressure grouting including all material, labour cost and machinery charges, etc. complete in all respect as per the direction of the Engineer-in-charge. Renovation of esixting wall |
| 93 | Providing pressure grouting at a pressure of 5.6 kg/sqcm in required row / zigzag fashion as specified at 1.5 M interval as per site conditions to stop leakages through water retaining structures to the entire satisfaction of the Engineer-incharge including material compound, hardening materials, compressor equipment including scaffolding, smooth finishing, etc. complete in all respect as per the direction of the Engineer-in-charge.. Renovation of esixting wall |
| 94 | Supplying, fitting, fixing of Glazed tiles Above 0.20 sqm. (20mm thick) and fixing the same over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry including cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. Admin building |
| 95 | Greeneries and Landscaping: Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). Greeneries and Landscaping |
| 96 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment). Greeneries and Landscaping |
| 97 | Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. lead complete (sludge measured in stacks will be reduced by 8% for payment). Greeneries and Landscaping |
| 98 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20mm. Greeneries and Landscaping |
| 99 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. Greeneries and Landscaping |
| 100 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). Greeneries and Landscaping |
| 101 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately). Greeneries and Landscaping |
| 102 | Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). In rows 5 cm apart in both directions. Greeneries and Landscaping |
| 103 | Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler. Greeneries and Landscaping |
| 104 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge. Greeneries and Landscaping |
| 105 | Providing and fixing of Tuflex Garden fencing Hexagonal net/or equivalent of green colour having contents Weight grams/sqm. 510 (+/- 8%) in width of 60 cm. with bamboo of 90 cm. length and 18-20 girth. The bamboo should be painted with green colour paint of approved brand and manufacture two or more coats and fixed 30 cm. below ground level and 60 cm. above ground level at a distance of 1.50 mtrs. The net and bamboo should be binded with 2 mm. G.I. Wire at equal distance of three places in each bamboo complete and as per direction of Engineer-in-charge. Greeneries and Landscaping |
| 106 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical ? U ? shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4mm. Greeneries and Landscaping |
| 107 | Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical ? U ? shape) M.S. wires of 3.5 mm dia as per design, including required frame work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge Top inner width 35 cm, outer bottom width 25 cm, total height 35 cm and wall thickness 25.4mm. Greeneries and Landscaping |
| 108 | Internal ElectrificationRecessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular GI box with modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection, cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 109 | Supplying and fixing of 6 Amp Plug point Modular type on modular metal box base & cover with all connections.Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 110 | Supplying and fixing of 16 Amp Plug point Modular type on modular metal box base & cover with all connections. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 111 | Supplying and fixing 20 Amps AC socket outlet with plug top alongwith 20 amps “C” curve, SPMCB on surface or in recess complete with connections, testing and commissioning etc. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 112 | Supplying and fixing 32 Amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 32 amps “C” curve, TP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 113 | Supplying and fixing batten holder / BK angleholder ISI marked including connection etc.Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 114 | Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 115 | Supply of all required materials and recessed wiring to circuit / sub-main with followings number and sizes of PVC insulated FRLS 1100 volt grade stranded copper wire run inside 20mm PVC conduit pipe with copper wire as earth continuity conductor and complete in all respect including making good to all damages caused and Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge.: - 2 x 1.5sq.mm + 1 x 1.5sq.mm |
| 116 | 2 x 2.5sq.mm + 1 x 1.5sq.mm |
| 117 | 2 x 4sq.mm + 1 x 1.5sq.mm |
| 118 | 2 x 6sq.mm + 1 x 2.5sq.mm |
| 119 | 4 x 6sq.mm + 2 x 2.5sq.mm |
| 120 | 4 x 10sq.mm + 2 x 6sq.mm |
| 121 | 2 x 10sq.mm + 1 x 6sq.mm |
| 122 | Supplying and fixing following way SPN/TPN/VTPN sheet steel, MCB distribution board, 240/415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing, all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. 12W TPN DB with 63A TPN MCB as incomer and 10-32A \\"C\\" Curve SP MCB as outgoings |
| 123 | 6W TPN DB with 63A TPN MCB as incomer and 10-32A \\"C\\" Curve SP MCB as outgoings |
| 124 | 8W SPN DB with 32A DP MCB as incomer and 10-32A \\"C\\" Curve SP MCB as outgoings |
| 125 | Supplying, Installing, Testing and Energizing MS Cubical type Panel Board made of 2 mm thick CRCA Sheet with Hinged Door duly Fabricated with required MS Angle and Channels of adequate size, duly treated and Powder Coated (shall have Hinged Door at the Front and Detachable Plates at Back if requirement and at Top / Bottom for Cable / Wire Entry / Exit as per the Direction of Engineer-In-Charge and approved GA Drawing with following provisions. The panel board shall have Copper Bus Bar with proper Color code and PVC heat shrink sleeves, VAF digital meter, RYB indicator lamps, CT's, protecting devices, etc. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge.. Main Panel Board: 63 Amp TPN MCB 10KA - 6 nos |
| 126 | Sub-Panel Board: 63 Amp TPN MCB 10KA - 4 nos |
| 127 | Sub-Panel Board: 32 Amp DP MCB 10KA - 4 nos |
| 128 | Sub-Panel Board: 32 Amp DP MCB 10KA - 4 nos |
| 129 | Supply of following sized A2XFY Al armoured Cable 1100 Volts including excavation, sand cushing, protective covering and refilling the trench etc. as required. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge.. 3.5C X 300 sqmm |
| 130 | 3.5C X 185 sqmm |
| 131 | 3.5C X 95 sqmm |
| 132 | 3.5C X 50 sqmm |
| 133 | 3.5C X 35 sqmm |
| 134 | 3.5C X 25 sqmm |
| 135 | Trenching with sand spreading and bricks laying and laying of cable in trench in 2 1/2' depth .pvc cable upto 25sqmm. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 136 | Trenching with sand spreading and bricks laying and laying of cable in trench in 2 1/2' depth .pvc cable axceeding 25sqmm to 120sqmm . Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 137 | Trenching with sand spreading and bricks laying and laying of cable in trench in 2 1/2' depth .pvc cable exceeding 120sqmm to 400sqmm . Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 138 | Cable laying on wall surface with steel shaddle up to 25sqmm (Horizantally).Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 139 | Cable laying on wall with steel shaddle upto exceeding 25sqmm to 120sqmm (Horizantally). Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 140 | Cable laying on wall with steel shaddle upto exceeding 120sqmm to 400 sqmm (Horizantally). Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 141 | Cable laying on wall surface with steel shaddle up to 25sqmm (Vertically). Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 142 | Cable laying on wall with steel shaddle upto exceeding 25sqmm to 120sqmm (Vertically). Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 143 | Cable laying on wall with steel shaddle upto exceeding 120sqmm to 400 sqmm (Vertically). Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 144 | Supplying and end termination of following sized A2XFY Al armoured Cable 1100 Volts as required of the following size. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. (3.5C X 300 sqmm) |
| 145 | 3.5C X 185 sqmm |
| 146 | 3.5C X 95 sqmm |
| 147 | 3.5C X 50 sqmm |
| 148 | 3.5C X 35 sqmm |
| 149 | 3.5C X 25 sqmm |
| 150 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 151 | Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 152 | Supplying and laying 25 mm x 6 mm CU earth strip ISI marked in surface as strip earth electrode including soldering etc. as required. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 153 | Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 154 | 22W Batten LED T-5 of Die Cast Alluminium body. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 155 | Pressure Die Cast Aluminium IP 66 & IK 08 type 55W LED Fitting similar to LE09-671-XXX-57-XX. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 156 | 9W LED Bulb. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 157 | Bulkhead with LED Bulb of 15W. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 158 | 15W LED Round Light of Die Cast Alluminium body. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 159 | 50W Outdoor light along with clamp (GI) for fixing the same. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 160 | 50W Post Top LED. Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 161 | Supply, Installation, Testing and Commissioning of ceiling fan of 5 star rating with high air delivery 1200mm sweep including wiring Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 162 | Supply, Installation, testing and commissioning of exhaust fan of Heavy Duty 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 163 | Supply, installation, testing and commissioning of 40W AIO LED Solar Street lights having extruded alluminium housing, 100Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 36 Ah or more LiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor to provide 2 days (48 hrs ) back up . The luminaire must have IP 65 protection for critical components, IK 07 and having lumen output of > 6000 lumen with not less than 6000k CCT as LM 79 report of third party NABL lab. Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The complete Solar lighting system must be warrantied for a period of 5 years. The Luminaire should be supplied along with adjustable type mounting bracket which can be fitted directly on the pole. Th luminaire weight should be minimum 14 KG and dimension to be considered in structural calculation of pole. The Solar lighting companies must be having toll free base service network to provide immediate after sales service through their service franchise/newtorks available within 100-150 KM from the project site to provide immediate aftersales service.Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 164 | Supply, installation, testing and commissioning of 7 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130MM A/F of 4 mm thick or more, base plate as per IS 2062 complete with 4 nos. of EN8 grade foundation bolts to withstand basic wind speed of 250 KM/HR wind speed or more . The necessary structural calculation to be submitted for the Octagonal pole by considering each luminaire weight including bracket as minimum 14 KG & wind expose area of the luminaire. All these factors to be considered while designing the pole & its foundation bolts. The pole manufacturer must submit the structural calculation, GA drawing , Foundation drawing and foundation bolts details suitable for 250 KM/HR or more Wind speed. |
| 165 | Supply, installation, testing and commissioning of double arm bracket of 70 mm dia and 0.9 to 1 mtr long for fixing the Solar Luminaire Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 166 | Supply, installation, testing and commissioning of Single arm bracket of 70 mm dia and 0.9 to 1 mtr long for fixing the Solar Luminaire Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 167 | Construction of Civil foundation by using M25 grade RCC by considering SBC as 7 T/ per sqr mtr as per the foundation drawing of Octagonal pole manufacturer . The scope of pole includes fixing of foundation bolts for erection of pole on that foundation bolts. |
| 168 | Lightening Arrester & Chemical Earthing: Supply, Installation ,Testing & Commisioning of ESE Lightening Air Terminal early steamer emmision with OPR 60 with Radius of protection of 79 mtr in Level-1 in accoradance to NFC-17-102 standard Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 169 | Supply, Installation ,Testing & Commisioning of Mounting Mast of Length - 2mtr 30mm dia Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 170 | Supply, Installation ,Testing & Commisioning of GI Mounting mast of Length - 3mth with guy wire and base plate Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 171 | Supply, Installation ,Testing & Commisioning of Lightening Flash Counter Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 172 | Chemical Earthing: Supply, Installation ,Testing & Commisioning of providing maintenance free chemical earthing furse 25 kg black fill compound for lighting arrester with all cost of copper bounded rod with earth pit Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 173 | Down Conductor for Lightening Arrester & Chemical Earthing: Supply, Installation ,Testing & Commisioning of 1C 70sqmm Copper Conductor Including all cost, conveyance and taxes of all materials etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 174 | Water supply and sanitation: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. 20mm. dia CPVC pipe [Sch-80.] Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 175 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. 25mm. dia CPVC pipe [Sch-80.] Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 176 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge 32mm. dia CPVC pipe [Sch-80.] Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 177 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge 40mm. dia CPVC pipe [Sch-80.] Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 178 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conferming to IS : 15778,having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1.00m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge 50mm. dia CPVC pipe [Sch-80.] Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 179 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipe conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes 75mm diameter. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 180 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipe conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion, (i) single socketed pipes 110mm diameter. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 181 | Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes ] 32mm.dia. PVC pipe. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 182 | Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes ] 40mm.dia. PVC pipe. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 183 | Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes ] 50mm.dia. PVC pipe. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 184 | Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes ] 75mm.dia. PVC pipe. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 185 | Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes ] 110mm.dia. PVC pipe. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 186 | Supplying all materials,labour and T&P for laying in trenches unplasticized PVC pipes and specials of the following outside dia. for all classes including jointing with approved solvent cement by non-heat application method including testing as per specification and direction of Engineer-in-charge etc. all complete. [including earth work and cost of pipes ] 160mm.dia. PVC pipe. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 187 | Supplying all materials,labour and T&P for fixing water closet (I.W.C. or Orissa pan) duly embedded in cement concrete (1:3:6) using 12mm. size h.b.g. chips [including foot rest for I.W.C. and trap] all complete as per specification.[3.3.1./330] (including cost of closet ) Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 188 | Supplying all materials,labour and T&P for fixing 10.00 ltr capacity low level cistern with a pair of cast iron or M.S. brackets complete with fitting such as siphonic arrangement,15mm. nominal size brass/PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 40mm.dia. porcelain enamelled flush bend, 12mm. dia. PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc. all complete as per specification.[3.3.5./336] (including cost of cistern and all accessories). Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 189 | Supplying all materials,labour and T&P for fixing wash down water closet (European type W.C.) with integral \\"S\\" or \\"P\\" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification.[3.3.2./334] (including cost of closet. ) Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 190 | Supplying all materials,labour and T&P for fixing Half stall urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc. all complete as per specification.[3.3.8./339] Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 191 | Supplying all materials,labour and T&P for fixing glazed earthen-ware squatting plate of size (450x350x100.) with integral longitudinal flushing pipe including embedding the plate in 25mm. cement mortar (1:8) laid over 150mm. cement concrete (1:3:6) using 12mm. size h.b.g. chips all complete as per specification.[3.3.9./340] Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 192 | Supplying all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.[3.3.12./344] (including cost of wash hand basin and all accessories. ) Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 193 | Supplying all materials,labour and T&P for fixing Pedestal for wash hand basin complete recessed at the back for the receiptionof pipe and fittings etc. all complete as per specification including cost of pedestal for wash basin. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 194 | Providing and fixing stainless steel A ISI 304 (18/8) kichen sink with drain board 510 x 1040mm bowl depth 250mm as per IS 13983 with CI brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 195 | Supplying all materials,labour and T&P for fixing of 600x450 bevelled edge mirror of superior glass mounted on 6mm thick ac sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc. All complete as per specification [ 3.3.24/357] Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 196 | Supplying all materials,labour and T&P for fixing standard size glass self with chromium plated brass brackets and guard rails fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.[3.3.28./358] Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 197 | Supplying all labour and T&P for fixing Brass screw down Stop cock/ Gun metal Full way valve of the following size as per specification all complete (excluding cost of valve ) [data for 10 nos.][2.5.12/264] 20mm and 25 mm fullway valve . Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 198 | Supplying all labour and T&P for fixing Brass screw down Stop cock/ Gun metal Full way valve of the following size as per specification all complete (excluding cost of valve ) [data for 10 nos.][2.5.12/264] 50mm fullway valve . Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 199 | Fixing of Brass Screw Down Bib Cocks (Taps) polished bright conferming to IS-781-1995 of the following nominal sizes as per specification complete.15MM CP LONG BODY BIB COCK WITH FLANGE. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 200 | Fixing of Brass Screw Down Stop Cocks conferming to IS-781-1995 of the following nominal sizes as per specification complete.20MM CP CONCEALED STOP COCK. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 201 | Supplying all materials,labour and T&P for fixing of shower rose with 15mm or 20mm inlet including polishing etc. All complete as per specification [ 3.3.24./356]. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 202 | Supplying all materials,labour and T&P for fixing standard size C. P. towel rail fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.[3.3.27./358](including cost of towel rail ) Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 203 | Fixing cromium plated brass soap dish complete with cromium plated brass brackets fixed to wooden plugs with cromium plated brass screws as per specification. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 204 | Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 205 | Fixing of Brass Screw Down Stop Cocks conferming to IS-781-1995 of the following nominal sizes as per specification complete.15MM CP ANGLE STOP COCK. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 206 | Fixing of Brass Screw Down Stop Cocks conferming to IS-781-1995 of the following nominal sizes as per specification complete. 15MM CP PILLAR COCK. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 207 | Fixing PVC Waste Pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 208 | Fixing Cromium plated Waste of following nominal diameter for wash basin and sink as per specification. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 209 | Fixing 15mm dia PVC inlet connection Pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 210 | Supplying all materials,labour and T&P for fixing cast (spun) iron floor traps of the following nominal diameter of outlet, of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification.[3.3.17./352] (including cost of cast iron trap and grating. ) Floor trap (100mm.x50mm. dia.) Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 211 | Constructing manholes with RCC top slab in RCCM20, foundation concrete (1:3:6), inside & ouside plaster 12 mm thick cement mortar (1:4) finished with neat cement punning, brick work with flyash brick having crushing strength not less than 75kg/cm² with dimensional tolerance ±8 percent in cement mortar (1:5) cement concrete (1:2:4) finished smooth using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber complete as per specification. Chamber Size (1.20x0.90x0.90)m. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 212 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with brick work in cement mortar (1:6) for 0.15mtr. thick bed, and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 1.50mtr.from bottom, covered by means of 40mm.thick R.C.C. slab,over 5nos of 1200 mm dia rcc well ring including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. Admin, Dormitory, Auction hall, Rest shed, Security guard house, Public toilet, Restaurant, Radio communication tower, Boat repair shop |
| 213 | (OHT & SWOT): Constructing masonry Chamber 120 x 90 x 90 cm inside, in brick in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design - with brick class designation 7.5. |
| 214 | Supplying and fixing cast iron flange 125mm size while concreting of deck slab for fitting flush water and delivery pipes, including cost and conveyance of all materials, moulding charges and labour |
| 215 | Supplying and fixing 110mm or nearest size PVC vent cowl including all charges. |
| 216 | Fabricating, supplying and fixing while concreting of cover slab of tank MS man hole frame of size 75x75cm water made out of 50x50x6mm MS angle with necessary anchor roads to get enough bonding with RCC. |
| 217 | supplying and fixing Square C.I. cover for manholes - 450 x 600 mm rectangular C.I. cover (light duty). SR-2022, P-152, I-390 |
| 218 | supplying and fixing Square C.I. cover for manholes - 450 x 600 mm rectangular C.I. cover (light duty). SR-2022, P-152, I-390. |
| 219 | Supplying and fixing 160mm PVC pasted type tees. SR-2022, P-148, I-229 |
| 220 | Supplying and fixing 160mm PVC bend pasted type. SR-2022, P-147, I-191 |
| 221 | Providing and laying S&S Centrifugally (spun) Cast iron pipe class LA (Electro steel/Lanco/Jindal) conforming to IS specification 1536 and ISI marked suitable--100mm dia. SR-2022, P-128, I-2Ai |
| 222 | Providing and laying S&S Centrifugally (spun) Cast iron pipe class LA (Electro steel/Lanco/Jindal) conforming to IS specification 1536 and ISI marked suitable for tyton /push on joints in good condition including transportation of C.I.pipe from production centre/company to the site at Puducherry, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS 3114 and CPWD specification . (earth work and jointing of pipes with rubber gasket will be paid separately) -125mm dia. |
| 223 | Providing and fixing C.I. non return valve (PN 1.6) conforming to IS 5312 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) -100 mm dia. SR-2022, P-133, I-9Bi |
| 224 | Providing and laying S&S CI standard specials such as tees, bends, collars, tapers, caps etc (heavy class) upto 300 mm dia. SR-2022, P-132, I-7 |
| 225 | Providing and fixing CI sluice valves (with cap) complete with bolts, nuts, rubber insertion etc (the tail pieces if required will be paid separately) 100mm diameter class II. SR-2022, P-132, I-8Di |
| 226 | Providing and fixing CI sluice valves (with cap) complete with bolts, nuts, rubber insertion etc (the tail pieces if required will be paid separately) 150mm diameter Class I. SR-2022, P-132, I-8Cii |
| 227 | Providing and fixing in position UPVC moulded tail piece without flange(Finolex/Jain) (0.6 Mpa)conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 110mm dia |
| 228 | Providing and fixing in position UPVC moulded tail piece without flange(Finolex/Jain) (0.6 Mpa)conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 140mm dia |
| 229 | Supplying and erection 2 Nos of 7.5 HP pumpset ( including stand bye ) including cast iron suction and delivery line to OHT Please Enable Macros to View BoQ information |
| 230 | Supplying and erection 2 Nos of 7.5 HP pumpset ( including stand bye ) including cast iron suction and delivery line to OHT Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
