|
| 1 | GROUND FLOOREarthwork excavation in hard soil within initial lead and lift including rough dressing & breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.30 Mt. in depth etc. complete. |
| 2 | Sand filling in Foundation & Plinth, including watering and hand ramming etc. complete. |
| 3 | Back filling avelable excavated earth etc complete. |
| 4 | Providing and laying pain cement concrete of proporation (1:4:8)etc complete. |
| 5 | Providing and laying in position ready mix M-25 grade concrete etc complete.Column |
| 6 | Plinth Beam |
| 7 | Rcc Roof Ground Floor |
| 8 | Rcc in Roof Slab (Toilet) |
| 9 | Lintel |
| 10 | Stair Case |
| 11 | Chajja |
| 12 | RCC column terrace |
| 13 | Providing , straightening, cutting, bending, binding of HYSD bar including tying the grill and placing in proper position including cost of 18 to 20 gauge binding wires and HYSD Rod with all labours etc all complete. |
| 14 | Ground FLOOR |
| 15 | Terrace |
| 16 | Fly Ash Brick masonary in F&P with CM (1:6) using 25 x 12 x 8 cm size bricks including all cost, conveyance, royalty in F&Petc. complete. |
| 17 | Fly Ash Brick masonary in Super Structure with CM (1:6) using 25 x 12 x 8 cm size bricks including all cost, conveyance, royalty etc. complete. |
| 18 | Fly Ash Brick masonary in Super Structure with CM (1:6) using 25 x 12 x 8 cm size bricks including all cost, conveyance, royalty etc. complete. Terrace |
| 19 | Fly Ash Brick masonary in Super Structure with CM (1:4) using 25 x 12 x 8 cm size bricks including all cost, conveyance, royalty etc. complete. Ground Floor |
| 20 | 12 mm thick Cement Plaster with CM (1:6) including all cost, conveyance & royalty etc. complete. |
| 21 | 16 mm thick Cement Plaster with CM (1:6) including all cost, conveyance & royalty etc. complete. |
| 22 | 6 mm thick Cement Plaster with C.M (1:4) on ceiling including all cost, conveyance & royalty etc. complete. |
| 23 | Finishing surface of wall with Acrilic Wall Putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of puty all labour T&P etc complete. |
| 24 | Painting 2 (Two) or more coats with Weather Coat Paint of premium brand Such as Asian/ Berger/ ICI paints or equivalent of approved quality & colour, using required quantities of paint as specified by the manufacturer to give an even shade over a coat of wall priming(water based) on the finished external plastered surface at all height , watering the surface before applying the Weather Coat Paint and curing for the required period including cost, coveyance, loading , unloading ,stacking and all taxes , cost of all Labour, Labour cess, Sundries ,Scafffolding ,Staging and T&P etc. required for the work complete in all respect as directed by the Engineer-in-charge. |
| 25 | Wall painting two coats with Plastic Emulsion paint of approved shade on new work to give an even shade including cost of paint all labour T&P etc complete. |
| 26 | Fixing Vetrified tiles in floors,treads of steps and landing on 20 mm thick bed of cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labours T&P, rubbing and polishing etc all complete. |
| 27 | Supplying, fitting and fixing vitrified tile in floors of size (600mm x 600mm ) laid on 12 mm thick cement mortar (1:3) joints with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete as per direction of engineer in charge. |
| 28 | Fixing granite tiles (19mm thick )in Floor trades or Steps and landing on 25 mm thick bed of cement motar(1:1)joints with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete as per direction of engineer in charge. |
| 29 | Supplying, fitting and fixing of Antiskid Ceramic Floor Tiles in flooring using special plain / printed series Ceramic Floor Tile of premium grade ( having minimum thickness 7 mm to 8 mm & size 300 mm x 300 mm OR 600 mm x600 mm, confirming toI.S 13755 of approved quality and shade in floors, treads on steps and landings on 25 m.m thick bed of cement mortar of mix (1:1) laid in proper slope and gradient with screened & washed sharp etc |
| 30 | Supplying, fitting and fixing of ceramic glazed wall Tiles in skirting dado,risers of step and wall using special plain / printed series Ceramic wall Tile of premium grade ( having minimum thickness 6.5 mm to 6.7 mm & size 300 mm x 300 mm OR 600mm x300 mm, |
| 31 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 32 | Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards etc. complete as per direction of the Engineer-In-Charge. |
| 33 | Providing,fitting and fixing of MS Door, Window, Grills etc including all cost, carriage,royalty etc complete. |
| 34 | Supplying, fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipes with Balustrade of size 32mm x32mmx 2mm @ 0.90m c/c and stainless square pipe bracing of 32mm x 32mmx 2mm in three rowa in stair case as per approved design and specifications buffing, polishing including cost, carriage,royalty etc complete. |
| 35 | Painting with synthetic enamel paint over a coat of primer of approved colour, shade and brand on New wood work /steel work in two or more coats as required to give an even shade including an under coat of suitable primer of approved brand and manufacturer including cost of all materials with taxes and transportation, loading, unloading, scaffolding, all labour, Labour cess, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge including filling gaps with putties, scrapping, sand papering and cleaning the surface to make free from rusts, dusts and oily substances before applying primer etc. complete. |
| 36 | Providing and fixing of 30mm thick WPC door shutter with hinges, tower bolt, handle, stainless steel screws etc. including the cost of all materials, hardware fittings, cost of all labour, conveyance, taxes, loading, unloading, T&P etc. complete as per the direction of Engineer-in-charge. |
| 37 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).( Ref :-WPC Frame DSR Page No - 341 cl.26.86.) |
| 38 | Supplying fitting and fixing of factory made FRP door frame of size 75mmx100mm including drilling holes in masonary wall with cost of all materials rawl plug screws with cost conveyance, labour T&P etc complete required for the work |
| 39 | Providing and fixing Fiber Reinforced Plastic (FRP) door in cluding all fittings and cost, conveyance of all materials, labours and T&P required for the work etc, all complete as per direction of engineer in charge. |
| 40 | 2.0 cm thick grading Plaster (1:4) on roof slab including all cost, conveyance, royalty & taxes etc.comp.to work site for new work as per the specification approved by the department & direction of E.I.C Please Enable Macros to View BoQ information |
