|
| 1 | Dismantling bricks (laid flat or on edge)(laid, bedded and pinned in any mortar) or brick tiles in floors, channels, kerbs, aprons etc., (each layer) thickness in floors, aprons etc., complete all as per SSR and as directed by EIC. |
| 2 | Demolition of cement concrete 75mm thick avg (unreinforcement) of any description and in any position not otherwise specifically provided for. Complete all as per SSR and as directed by EIC. |
| 3 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required., (internal dia of pipe-100mm) complete all as per SSR and as directed by EIC |
| 4 | Demolition and breaking up drain pipes dia 100mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as per SSR and as directed by EIC |
| 5 | Demolition and Dismantling of brickwork or stone/boulder masonry, portion ordered built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and (for exhaust fan hole) precast concrete articles., complete all as per SSR and as directed by EIC.by EIC. |
| 6 | Disconnecting existing tanks capacity in litres exceeding 1000 and not exceeding 2000 setting aside (or lowering if required) for repairs, cleaning etc., and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc., measured separately) cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes etc., complete all as per SSR and as directed by EIC. |
| 7 | Demolition of Concrete of any description and in any position not otherwise specifically provided for and if cement concrete is reinforced (reinforcement cut as required to facilitate demolition) complete all as per SSR and as directed by EIC. |
| 8 | Surface excavation of hard/ dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as per SSR and as directed by EIC. |
| 9 | Excavating in hard/dense soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out etc., all as per SSR and as directed by EIC |
| 10 | M&L Sand filling under floors or in foundations including watering and consolidation etc., all as per SSR and as directed by EIC |
| 11 | M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. Complete all as per SSR and as directed by EIC. |
| 12 | M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20mm graded aggregate) in Columns, pillars, piers, posts and struts etc. Complete all as per SSR and as directed by EIC. |
| 13 | M & L Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete all as per SSR and as directed by EIC. |
| 14 | M&L for cement concrete type B-0 1:2:4 (12.5mm graded aggregate) 100mm thick etc., complete all as per SSR and as directed by EIC. |
| 15 | Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:6., complete all as per SSR and as directed by EIC. |
| 16 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3. complete all as per SSR and as directed by EIC. |
| 17 | Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., except bitumen. Complete all as per SSR and as directed by EIC. |
| 18 | Brushing neat cement slurry with 3.0kg of cement per sq.m., complete all as per SSR and as directed by EIC |
| 19 | Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2. excepts felt. Complete all as per SSR and as directed by EIC |
| 20 | APP based polymeric membrane weighing 3 kg/sqm and 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land on primed surface by forced application complete all as per SSR and as directed by EIC |
| 21 | M&L two coat of heat resisting paint over polymeric membrane surface (i.e. Super silver shield paint & shall be applied @250 gm/sqm. as recommended by the manufacture) exceeding 10cm in width or girth. Complete all as per SSR and as directed by EIC |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for., complete all as per SSR and as directed by EIC |
| 23 | S & F Rolled mild steel in Joist, channel, angle, or tee sections,Fe 410 -W (GdeE- 250) quality -A fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) all as per SSR and as directed by EIC. |
| 24 | M & L brickwork with subclass 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) etc., complete all as per SSR and as directed by EIC. |
| 25 | Screed bed or bedding layer of mortar 25mm thick for laying floor finishes in CM 1:6., complete all as per SSR and as directed by EIC |
| 26 | S&F non-skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match., complete all per SSR and as directed by EIC |
| 27 | S&F glazed ceramic colour tiles in vertical surface 300*200*7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. Complete all as per SSR and as directed by EIC |
| 28 | Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Complete all as per SSR and as directed by EIC |
| 29 | Concrete bed to drain pipes 100mm dia cement concrete 1:3:6 type C-2 including packing under and completely surrounding pipes with concrete after they are laid and tested in. complete all as per SSR and as directed by EIC |
| 30 | Providing precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) set in CM 1:4 solid building blocks or slabs 7.5cm thick (with plain or interlocking joints as directed) setting in mortar, complete in walls, complete all as per SSR and as directed by EIC |
| 31 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips., complete all as per SSR and as directed by EIC |
| 32 | M&L Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. Complete all as per SSR and as directed by EIC. |
| 33 | Formwork to sides (Flat surfaces) of rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. Complete all as per SSR and as directed by EIC. |
| 34 | Formwork to sides (Flat surfaces) of rough finished surfaces of concrete columns (Square/Rectangular or Polygonal) etc. Complete all as per SSR and as directed by EIC. |
| 35 | Formwork to sides flat surfaces (rough finished surfaces of concrete) lintels etc. Complete all as per SSR and as directed by EIC. |
| 36 | Formwork to soffits of suspended slabs flat surfaces (rough finished surfaces of concrete) such as roof slabs, roof slab sides not exceeding 200mm thick (Horizontal) etc. Complete all as per SSR and as directed by EIC. |
| 37 | Surface dressing hard/dense soil n exc15 cm deep Complete all as per SSR and as directed by EIC. |
| 38 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering and consolidation etc.,Complete all as per SSR and as directed by EIC. |
| 39 | M&L Sand filling under floors or in foundations including watering and consolidation Complete all as per SSR and as directed by EIC. |
| 40 | M&L burnt clay old size bricks of sub class B Continuous brick edging; with width equal to the depth of the brick, laid dry, on edge Complete all as per SSR and as directed by EIC. |
| 41 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls a)110mm dia. Complete all as per SSR and as directed by EIC |
| 42 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls b)75mm dia. Complete all as per SSR and as directed by EIC |
| 43 | S&F PVC fittings a)110mm bend |
| 44 | S&F PVC fittings b)110mm dia single T |
| 45 | S&F PVC fittings c)110mm single Y |
| 46 | S&F PVC fittings d)110mm couplers |
| 47 | S&F PVC fittings e)110mm Vent cowl |
| 48 | S&F PVC fittings f)75mm bend |
| 49 | S&F PVC fittings g)75mm single T |
| 50 | S&F PVC fittings h)75mm single Y |
| 51 | S&F PVC fittings i)75mm multi floor trap |
| 52 | Nipple suitable for HDPE water tank, 25mm dia (minimum weight 15mm 38gms/20mm - 45gms/25mm-65gms). Complete all as per SSR and as directed by EIC |
| 53 | S&F of vitreous china squatting pan orissa pattern, size 580*440mm white with intergal foot rest (excluding flusing cistern and flush pipe) in repair including provision of lime concrete bedding. Complete all as per SSR and as directed by EIC |
| 54 | S & F PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipes 32mm dia all as per SSR and as directed by EIC in repairs. ( parryware, Hindware,Prayag make only acceptable ) |
| 55 | S & F Vitreous China wash basin, white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets all as per SSR and as directed by EIC. |
| 56 | M & L Waste fittings, brass, 32mm dia chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs all as per SSR and as directed by EIC. |
| 57 | S & F Bib taps, fancy type 20 mm dia chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as per SSR and as directed by EIC. |
| 58 | S&F stop valves, 20mm dia cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. Complete all as per SSR and directed by EIC |
| 59 | S&F PVC connection 15mm dia 450mm long. Complete all as per SSR and as directed by EIC |
| 60 | S&F pillar taps, fancy type 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs Complete all as per SSR and as directed by EIC |
| 61 | Supply and apply two coats of water based emulsion paint over coat of primer on CEILING including complete removal of existingtreatment and preparation of surface etc complete for ceiling surfaces all as per SSR and as directed by EIC |
| 62 | Supply and apply two coats of water based EXTERIOR emulsion paint over a coat of wall primer including complete removal of existingtreatment and preparation of surface etc complete for wall surfaces all as per SSR and as directed by EIC |
| 63 | Supply and apply two coats of water based INTERIOR emulsion paint over a coat of wall primer including complete removal of existingtreatment and preparation of surface etc complete for wall surfaces all as per SSR and as directed by EIC |
| 64 | M&L Preparation of old painted wood and steel surface and two coats of synthetic enamel paint over one coat of red oxide primer all as per SSR and as directed by EIC |
| 65 | Supply and apply two coats of polishing material for the exising granite stone floors including cleaning/removal stain/ preparation of surfaces etc. Complete all as per SSR and as directed by EIC |
| 66 | Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing complete etc., complete all as per SSR and as directed by EIC |
| 67 | M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as per SSR and as directed by EIC |
| 68 | Removing building materials etc., (other than spoil payable under items 03028 to 03031 in section 3-earthwork) to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination add for every additional 100m or part thereof (upto1.0 km total distance). complete all as per SSR and as directed by EIC |
| 69 | Removing/ Lifting existing damaged GI pipes from bore well, flushing bore well upto a depth of 200 feet , supply & fixing new PVC pipes 1 1/2 inch dia with accessories, supply & fixing of 3 HP submersble pump, motor with all necessary fittings etc., complete all as per SSR and as directed by EIC. |
| 70 | Supply and fixing of wood polymer composite (WPC) one side laminated door & frame with all necessary fittings shutter thickness 30mm, frame size 100mm x75mm. Complete all as per SSR and as directed by EIC. |
| 71 | Supply and fixing factory made UPVC white colour casement ( openable) window made of extruded profiles with wall tk 2.3 mm (+ or - 0.2mm). Window profile with hollow section with multi chamber, frame (60mmx 58mm), sash (60mmx73mm), T profile (One vertical length in between two shutters ) (60mmx 74mm), Glazing bead (35mmx 20mm) willbe mitered cut and fusion welded at all corners, including drilling holes for fixing hardware and drainage of water etc., making arrangement for fixing of of hardware. EPDM gasket 1.2 + or - 0.2mm tk, galvanized steel frame ( 28mmx 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mmx100mm long fasteners. Hardware:( casement handle made of zinc alloyed ( white power coated), but hinges of zinc alloyed (white power coated) transmission gear made of mild steel with multi point locking system) and 5mm tk glazing with selected quality glass. Complete all as per SSR and as directed by EIC. |
| 72 | Supply and fixing UPVC mosquito net open/ close type with stainless steel mesh including all necessary fittings etc. Complete all as per SSR and as directed by EIC. |
| 73 | Supply and fixing of chromium plated bib taps half turn type long body 15mm dia (prayag/ parryware/ hindware all as per SSR and as directed by EIC. |
| 74 | Supply and fixing of health faucet with SS 304 grade 1.25m long flexible hose pipe and wall hook (prayag/ parryware/ hindware) complete all as per SSR and as directed by EIC. |
| 75 | Supply and fixing UPVC door (openable shutters partially WPVC one side laminated sheet and partially figured glass) including frames made of UPVC. extruded sections having an overall dimension (extruded section profile) 48x40mm (tolerance+/- 1mm), with wall thickness 2.0mm (+/- 0.2mm), corners of the door frame jointed with galvanised brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tupe of size 19x19mm and 1mm (+/- 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame and door shutters made of styles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2mm (+/- 0.2mm) with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanized/ plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20mm and 1mm (+/- 0.1mm) wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x24mm and 2mm (+/- 0.2mm) wall thickness, fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620mm, habing over all thickness of 20mm and 1mm (+/- 0.1mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer. (for entrance gate) complete all as per SSR and as directed by EIC. |
| 76 | Supply and fixing of floor mount one piece western closet (EWC) white (P or S trap - prayag/ parryware/ hindware) including flushing cistern and its connections etc., complete as per SSR and as directed by EIC |
| 77 | Supply and fixing of ceramic pedastal free standing wash basin size 23\\" x 21\\" x 35\\" (white glossy) (prayag/ parryware/ hindware/ cera) complete all as per SSR and as directed by EIC. |
| 78 | Supply and fixing of Deck mount wash basin tap chromium plated single lever hot and cold mixer parryware/ prayag/ hindware/ cera) 15mm dia complete complete all as per SSR and as directed by EIC. |
| 79 | Supply and fixing square floor drain gratings, stainless steel 304 grade 6\\"x6\\" complete. all as per SSR and as directed by EIC. |
| 80 | Taking down shutters of any description exc 1 sqm not exceeding 2 sqm each removing to store complete all as per SSR and directed by EIC |
| 81 | Taking down chowkhats (without taking off shutters from the frames) removing to store complete all as per SSR and directed by EIC |
| 82 | Supply and fixing Factory made wooden solid door shutter 30mm thick (hydraulically press) with chowkhat frame first class timber of size 100mm x 75mm complete all as per SSR and directed by EIC |
| 83 | Supply and fixing Factory- made solid panel PVC door single side prelam PVC sheet of shutter 30mm thick (Style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement with all necessary fittings for toilets complete all as per SSR and directed by EIC. |
| 84 | Supply and fixing factory made UPVC white colour casement (openable) window made of extruded profiles with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x58mm), sash (60mmx73mm), T profile (one vertical length in between two shutters) (60mmx74mm), glazing bead (35mmx20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +/- 0.2mm thick, galvanized steel frame (28mmx21.5mm), sash (31mmx27.5mm). Tprofile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware (casement handle made of zinc alloyed (whiter powder coated), Butt hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with milti point locking system) and 5mm thick glazing with selected quality glass. (for windows) complete all as per SSR and directed by EIC. |
| 85 | Supply and fixing factory made UPVC white colour fixed window made of extruded profiles with wall thickness 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber. Frame (60mmx58mm). Tprofile (one vertical length in between two shutters) (60mmx74mm). Glazing bead (35mmx20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water wtc. making arrangement for fixing of hardware, EPDM gasket. 1.2 (+/-0.2mm) thick, galvanized steel frame (28mmx21.5mm), Tprofile (27mmx17mm) to be inserted in required profile, frame wil be fixed to the wall with 8mm x100mm long fasteners 5mm thick glazing with selected quality glass semi transperent type.( for ventilators) complete all as per SSR and directed by EIC. |
| 86 | Supply and fixing fancy type PVC moulded looking mirror without LED lights of size 600x450mm etc., complete all as per SSR and directed by EIC. |
| 87 | Supply and fixing chrome plating bathroom wall mixed for hot & cold water wall mounted with provision for overhead shower with long bend pipe and wall flange parry ware/ hindware/ cera 15mm dia etc complete all as per SSR and directed by EIC. |
| 88 | Supply and fixing of stainless steel hand rail using SS pipes of varies dia from 50mm to 20mm with grill/ 12mm thick toughened glass (special design) work for hand rail sit out grill work all as per SSR and directed by EIC. |
| 89 | Dismantling existing kotta stone slab/marble top , glazed wall tiles, Supply and fixing/ laying of Granite top & wall tiles, Supply & fixing modular kitchen cabinet set including provision of necessary electrical points, S& F of SS sink with taps etc., S&F 2 Chimneys, S & F aluminium glass window etc,. complete all as per SSR and directed by EIC. |
| 90 | S & F Wardrobe made up of metal composite panel with racks and drawers with all accessories etc., complete all as per SSR and directed by EIC. |
| 91 | Supply of ready made table of size: 4 feet x 2 feet madeup of quality wood complete all as per SSR and directed by EIC. |
| 92 | Supply and providing reception counter table with side & top covering madeup of standard wood etc complete all as per SSR and directed by EIC. |
| 93 | S & F Aluminium anodised, barrel tower bolts of size 300mm long of extruded section and fixed complete all as per SSR and directed by EIC |
| 94 | S & F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as per SSR and directed by EIC |
| 95 | S & F Butt hinges, heavy weight, cold rolled mild steel, and fixed - 125mm complete all as per SSR and directed by EIC |
| 96 | S & F Butt hinges, heavy weight, cold rolled mild steel, and fixed - 75mm complete all as per SSR and directed by EIC |
| 97 | S & F Gate and shutter, hooks and eyes 75mm - aluminium type 1 complete all as per SSR and directed by EIC |
| 98 | S & F Gate and shutter, hooks and eyes 200mm - aluminium type II complete all as per SSR and directed by EIC |
| 99 | S & F Aluminium handles, cast type, anodised 75mm complete all as per SSR and directed by EIC |
| 100 | S & F Aluminium handles, cast type, anodised 150mm complete all as per SSR and directed by EIC |
| 101 | Dismantling structural steel work including doors, gates but excluding framedtruss etc. complete all as per SSR and directed by EIC |
| 102 | Taking up or down 15mm DIA steel tubing and connections, including cleaning for refixing or removal to store complete all as per SSR and directed by EIC |
| 103 | Taking up or down 20mm DIA steel tubing and connections, including cleaning for refixing or removal to store complete all as per SSR and directed by EIC |
| 104 | Taking up or down 25 TO 32mm DIA steel tubing and connections, including cleaning for refixing or removal to store complete all as per SSR and directed by EIC |
| 105 | Taking up or down 40mm DIA steel tubing and connections, including cleaning for refixing or removal to store complete all as per SSR and directed by EIC |
| 106 | S & F Tubes, 'medium grade' 15mm dia galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as per SSR and directed by EIC |
| 107 | S & F Tubes, 'medium grade' 20mm dia galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as per SSR and directed by EIC |
| 108 | S & F Tubes, 'medium grade' 25 mm dia galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as per SSR and directed by EIC |
| 109 | s&f Tubes, 'medium grade' 40 mm dia galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as per SSR and directed by EIC |
| 110 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as per SSR and directed by EIC |
| 111 | S&F aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as per SSR and directed by EIC |
| 112 | S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as per SSR and directed by EIC |
| 113 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as per SSR and directed by EIC |
| 114 | S & F Soap dish, any type, fixed to plugs with hromium plated brass screws complete all as per SSR and directed by EIC |
| 115 | Veneered decorative ply wood with 5 ply 6mm thickness, grade I (with BWR resin) decorative veneers on on one face only complete all as per SSR and directed by EIC |
| 116 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as per SSR and directed by EIC |
| 117 | Glazed and skeleton shutters, 30mm thick 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied andfitted to chowkats complete all as per SSR and directed by EIC |
| 118 | S&F Aluminium Tubular towel rail 20mm dia complete all as per SSR and directed by EIC |
| 119 | S&F brackets for Aluminium Tubular towel rail 20mm dia complete all as per SSR and directed by EIC |
| 120 | M&L ,Modular switch 1 way 6A, 1 module complete all as per SSR and directed by EIC, |
| 121 | M&L,Modular switch 1 way 10A , 1 module complete all as per SSR and directed by EIC |
| 122 | M & L One 3 pin socket outlet. 5 amps on the same board with other switches, with cables 1.5 sq mm size ,independent,with (COPPER )cables (PVCconduit) complete all as per SSR and directed by EIC . |
| 123 | M & L One 3 pin socket outlet. 15 amps independent , with cables 4 sq mm size ,,with (COPPER )cables (PVConduit) complete all as per SSR and directed by EIC. |
| 124 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as per SSR and directed by EIC. |
| 125 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as per SSR and directed by EIC. |
| 126 | Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as per SSR and directed by EIC. |
| 127 | S&F Socket, 6A - 2/3 pin combined 2 module complete all as per SSR and directed by EIC. |
| 128 | S&F Socket, 6A/16A - 2/3 pin combined 2 module complete all as per SSR and directed by EIC. |
| 129 | S&F of Modular switch 2 way 6A, 1 module complete all as per SSR and directed by EIC. |
| 130 | Supply and fixing Modular Bell push, 6A, complete all as per SSR and directed by EIC. |
| 131 | S&F White cover plate with frame 1 Module complete all as per SSR and directed by EIC. |
| 132 | S&F White cover plate with frame 2 Module complete all as per SSR and directed by EIC. |
| 133 | S&F White cover plate with frame 3 Module complete all as per SSR and directed by EIC. |
| 134 | S&F White cover plate with frame 4 Module complete all as per SSR and directed by EIC. |
| 135 | S&F White cover plate with frame 6 Module complete all as per SSR and directed by EIC. |
| 136 | S&F White cover plate with frame 8 Module complete all as per SSR and directed by EIC. |
| 137 | S&F.Bell, AC, 230 volts, single pole complete all as per SSR and directed by EIC. |
| 138 | S& F Metal flush box 1/2 module complete all as per SSR and directed by EIC. |
| 139 | S& F Metal flush box 3 module complete all as per SSR and directed by EIC. |
| 140 | S& F Metal flush box 4 module complete all as per SSR and directed by EIC. |
| 141 | S& F Metal flush box 6 module complete all as per SSR and directed by EIC. |
| 142 | Supplying and fixing smart three phase four wiredual source prepaid energy meters BIS 15884marked in existing meter board / florr panels with pre payment capacity touch keypad based digita lhaving current ange 10-60 Amp 415 Volt accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sensethe DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG,capable to define for tariff slabs, happy hours and holiday definition. complete all as per SSR and directed by EIC. |
| 143 | S&F MCCBs 415V,16KA, 4 Pole,125A complete all as per SSR and directed by EIC. |
| 144 | Supply & fixing of single pole and neutral enclosure with two pin and earth plug and socket complete with singl pole MCB 20 Amps C type complete all as per SSR and directed by EIC. |
| 145 | Supply & Fixing of Triple pole and neutral 12 way complete all as per SSR and directed by EIC. |
| 146 | S & F Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/recessed as required 2x4.0 sq. mm +1x2.5 sq. mm earth wire(PVC CONDUIT) complete all as per SSR and directed by EIC. |
| 147 | S & F Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR is PVC insulated copper conductor, singlecore cable in surface/recessed as required 2x6.0 sq. mm +1X4 sq. mmearth wire(PVC CONDUIT) complete all as per SSR and directed by EIC. |
| 148 | S & F Wiring for circuit/submain wiring along with earthwire with the followingsizes of FR is PVC insulated copper conductor, singlecore cable in surface/recessed as required 2x2.5 sq. mm +1x1.5 sq. mm earth wire(PVC CONDUIT) complete all as per SSR and directed by EIC. |
| 149 | S & F One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size complete all as per SSR and directed by EIC. |
| 150 | S&F of Single pole & neutral-8 WAY Single door D.B complete all as per SSR and directed by EIC. |
| 151 | S & F Single pole and neutral enclosure witha two pin and earth plug and socket complete with one single pole MCB-10 amps complete all as per SSR and directed by EIC. |
| 152 | S&F Modular switch 2 way 6A, 1 Module complete all as per SSR and directed by EIC. |
| 153 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. complete all as per SSR and directed by EIC. |
| 154 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.SPN 40 to 63 AMP complete all as per SSR and directed by EIC. |
| 155 | Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete .with connection testing and commissioning TPN/FP 40 to 100 AMP complete all as per SSR and directed by EIC. |
| 156 | Supply and fixing LED street light fitting 70 Watt230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant cluding thermal management in multiple optics complete withIP 65/66 protection complete all as per SSR and directed by EIC. |
| 157 | Supply and fixing LED street light fitting 120 Watt230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant cluding thermal management in multiple optics complete withIP 65/66 protection complete all as per SSR and directed by EIC. |
| 158 | M&L.One light point or one fan point controlled by one switch with cables 1.5 sq mm size, copper conducter (PVC conduit) complete all as per SSR and directed by EIC. |
| 159 | Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as per SSR and directed by EIC. |
| 160 | Supply and fixing round shape 12 watt LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as per SSR and directed by EIC. |
| 161 | Supply and fixing round shape 15 watt LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as per SSR and directed by EIC. |
| 162 | S&F Calling bell Indicators directed by EIC. |
| 163 | Supply and fixing of Geycer 25 L directed by EIC. |
| 164 | Hanging & Fixing only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as per SSR and directed by EIC. |
| 165 | Supply and Fixing ,connection of Gate light directed by EIC. |
| 166 | S& F Earthing complete with using copper plate 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead complete all as per SSR and directed by EIC. |
| 167 | Earth pit chamber complete all as per SSR and directed by EIC. |
| 168 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc.8mm dia galvanised iron or steel wire complete all as per SSR and directed by EIC. |
| 169 | Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceilingroses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per conditions separately) and makinggood disturbed surfaces of walls, floors, etc. complete all as per SSR and directed by EIC. |
| 170 | Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches,sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as per SSR and directed by EIC. |
| 171 | Taking down fan, sealing cable end dismantling blades and removing fan and blades to store complete all as per SSR and directed by EIC. |
| 172 | Supply and Fixing with 2 Feet LED T/L& 2\\"x1\\" Name board (Acrylic sheet) complete all as per SSR and directed by EIC. |
| 173 | Supply & Installation 2 Ton 5 star Split Inverter AC-Make : Voltas/Blue star/Carrier complete all as per SSR and directed by EIC. |
| 174 | S & F Key card switches-40 A , directed by EIC. |
| 175 | Supply and Fixing of Metal box size 6\\" x 4\\" complete all as per SSR and directed by EIC. |
| 176 | Supply and Fixing of Metal box size 8\\" x 6\\" , complete all as per directed by EIC. |
| 177 | Supply and Fixing of Metal box size 10\\" x 8\\" , complete all as per directed by EIC. |
| 178 | Supply & Installation of 10 KVA Diesel generator Set directed by EIC.Make:Kirloskar, Cummins, Mahintra |
| 179 | S&F Change over Switch-100A.Three Phase ,directed by EIC. |
| 180 | Supply and Fixing of Exhaust fan, Size: 9\\",with duct directed by EIC. |
| 181 | Earth excavation in trench not exceeding 1.5M wide and not exceeding 1.5M depth in hard dense soil for laying of electrical UG cable as per SSR Specification and directed by EIC. |
| 182 | Return filling in of excavated soil in the trenches including spreading, leveling, watering and well ramming in layers not exceeding to a height of 25 cm from ground level as per SSR specification. complete all as per SSR and directed by EIC. |
| 183 | Concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level)cement concrete( unrein forced) complete all as per SSR and directed by EIC. |
| 184 | Cement concrete in foundations,filling and mass concrete Type B2 1:2:4 (40 mm graded aggregate) complete all as per SSR and directed by EIC. |
| 185 | M & L of Sand filling under floors or in foundations including Watering and consolidation complete all as per SSR and directed by EIC. |
| 186 | S&Laying of Bricks; common burnt clay building bricks sub-class ‘B’ Designation 75 complete all as per SSR and directed by EIC. |
| 187 | M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area area 150 sq. mm(3½ core) complete all as per SSR and directed by EIC. |
| 188 | M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm(3½ core) complete all as per SSR and directed by EIC. Please Enable Macros to View BoQ information |
