|
| 1 | Excavation in fdn. in ordinary soil I/c lift up to 1.5m & lead up to 30m I/cdisposal of surplus earth etc. complete as per SI No.251 |
| 2 | Cement Concrete in 1:6:12 with Cement, C/Sand 2.20 F.M and 4cm gauge stone ballast in foundation & under floor i/c all etc. complete in all respects as per S.I.No. 281a+new |
| 3 | R.C.C. in 1:1.5:3 with cement, coarse sand and 20mm S/ gauge S/Grit i/c all etc .complete as per S.I.No. 287 |
| 4 | M150 class B/W in 1:4 with cement and C/sand 2.20 Fm.mortar in plinth & foundation i /c all complete. As Chapter -6 S.I.No305 |
| 5 | R.C.C. work in 1:1.5:3 with Cement, coarse sand and 2cm guage stone grit for Beam i/c all etc.complete in all respects as per S.I.No. 286 |
| 6 | Sand Filling in Plinth Including supply of neecessary quantity of sand i/c all ect. Complete ina all respect as per Si No. 255 Ch No. 04 |
| 7 | M150 class B/W in 1:4 with cement and c/ sand 2.20 Fm.mortar in Super Structure i /c all complete. As Chapter -6 S.I.No (305+309+310) |
| 8 | R.C.C. work in 1:1.5:3 with Cement, coarse sand and 2cm guage stone grit for R.C.C. Coloumn i/c all etc.complete in all respects as per S.I.No. 289 |
| 9 | Mild steel /iron work such as R.C.C. work i/c all etc. complete as per S.I.No.504. |
| 10 | 12 mm thick cement plaster with cement and C/ sand of 2.20 f.m. morter in 1:4 i/c all complete as per SI NO.584 |
| 11 | Laying of 25mm thick KOTA stone of size 45X45cm and above flooring over previously prepared base with 2cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per the direction of Engineer-in-Charge including cutting polishing with wax polish including supply of all materials, labour and T&P etc. required for proper completion of the work. Same as above but in dado with 25mm thick stone As Per Chapter No-14 New Item -02 |
| 12 | 40 mm thick p.c.c. Floor in 1:2:4 with cement,cisend and stone grit i/c all etc. Complete as pe rsi no.605 |
| 13 | Providing Wall Putty on new surface with approvel quality material of berjer/j.k./birla etc make 2 coatesi/c all etc complete chapter no.15 New Item-11 |
| 14 | Finished wall with water proof weather coat of Apex super paint of app.make and App.qualityI/C all material i/c aall complete SI NO New Item 8+9+10 |
| 15 | M.S. Iron work in heavey size and section such as channal, truss racks, Gate, Door, Window etc i/c all meaterial, labour and T&P etc comp. as per si no. 503 |
| 16 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. as per D.S.R. 2023 Code No. 10.16.1 |
| 17 | Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. as per D.S.R. 2023 Code No. 12.1.1 |
| 18 | Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.l. limpet and bitumen washers complete :.as per D.S.R. 2023 Code No. 12.5.1 |
| 19 | Providing anc fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness, Alloy 31500 (IS designation Aluminium Alloy (AA) 3004 (ISO designation)]. For colour, coating shal be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50 mm with 3 mm thick EPDM seal and SS plain washer complete as per D.S.R. 2023 Code No. 12.66.6 |
| 20 | Providing and fixing of 100 mm dia P.V.C. Pipe 6kg/sqm pressure down pipe and under floor i/c all etc. comp. as per SI. No. 730 (a) chapter no 19 |
| 21 | S/F of sign board i/c supply of material, labours, T&P i/c all etc. with writing and painting complete in all respects. Please Enable Macros to View BoQ information |