|
| 1 | Mtc & Upkeep of ATC Signals installed at various junctions in various Sectors at Chandigarh. The job includes attendance of daily breakdown complaints, checking/re-adjustment of time setting as required. This also includes monthly overhauling of each controller such as dusting/cleaning, checking & tightening of Connections including supply & erection of petty material required for controller for its proper functioning. This also includes cleaning of poles and assemblies to give more signal effect and labour charges for removal old / burnt damaged parts as per following categories. |
| 2 | 9 Nos. for 12 Months |
| 3 | Downcounter TimersMtc. & repairing of reverse down counters including cleaning of the same as per site requirement from time to time to ensure its proper working. |
| 4 | 29 nos. for 12 months |
| 5 | Mtc. & Upkeep of Blinkers installed at various junctions in various Sectors at Chandigarh. The job includes attendance of daily breakdown complaints, checking/re-adjustment of time setting as required. This also includes monthly overhauling of each controller such as dusting/cleaning, checking & tightening of Connections including supply & erection of petty material required for controller for its proper functioning. (As per Complete Item No. 3 of the DNIT) |
| 6 | Sector-40 B/C |
| 7 | Supply/Erection of following components including testing & commissioning etc. as per site requirement: |
| 8 | Supply/Erection of junction box fabricated from MS sheet for RTS pole 4 inches dia including pole top fabricated from non conducting material. |
| 9 | Supply/Erection of junction box fabricated from MS sheet for cantilever pole 5 inches dia including pole top fabricated from non conducting material. |
| 10 | Supply/Erection of LED Retrofit kit 300mm dia Red/Amber Colour wired on epoxy PCB with 190 LEDs in Round Ball Shape. |
| 11 | Supply/Erection of LED Retrofit kit 300mm dia wired on epoxy PCB with 66 LEDs in Red Colour Arrow /Red Standing Man Shape. |
| 12 | Supply/Erection of LED Retrofit kit 300mm dia wired on epoxy PCB with 66 LEDs in Green Colour Arrow Shape/Walking Man Shape. |
| 13 | Supply/Erection of Electronics circuit for LED glass retrofit wire on epoxy printed board & Electronics components. |
| 14 | Dismantling of 28'long cantilever pole 6' below ground level by breaking CC Foundation. |
| 15 | Re-erection of 28' long Cantilever pole erected 6' below ground level with RCC Foundation. |
| 16 | Dismantling of Old Cable 3' below ground level/partly from existing pipe/pole. |
| 17 | Relaying of old dismantled cable laid 3' below ground level/partly from existing pipe/pole. |
| 18 | Dismantling of Pedestal Box after disconnecting all the cables safely including digging the same. |
| 19 | Re-erection of Pedestal Box including reconnecting all the cables. |
| 20 | Dismantling of 4\\" dia 14'/ 18' long RTS MS/GI Pole including digging out earth and breaking CC Foundations. |
| 21 | Re-erection of 4\\" dia 14'/18’ long RTS MS/GI pole including making CC Foundations with 1:3:6 CC Mixture atleast 3 feet below. |
| 22 | Supply and erection of PVC insulated armoured copper/ Al. conductor cable to be laid 3’ (1 Mtr.) below ground level/partly in existing pipe/pole including the cost of glands and making connections as per site requirement. The cable should strictly conform to IS specifications. |
| 23 | Cable size 4X1.5 mm sq Polycab / Havells / Certina / Grandlay/ RR Cables make cable. |
| 24 | Cable size 8X1.5 mm sq Polycab / Havells / Certina / Grandlay/ RR Cables make cable. |
| 25 | Cable size 14X1.5mm sq Polycab / Havells / Certina / Grandlay/ RR Cables make cable. |
| 26 | Supply/Laying of Aluminum Conductor Cable size 2 Core X10 sq. mm sq Polycab/ Havells/ Certina/ Grandlay/ RR Cables make cable. to be laid loose in existing trench/pipe. |
| 27 | DSR item No.15.15Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required |
| 28 | 90 mm dia (OD-90 mm & ID-76 mm nominal |
| 29 | 63 mm dia (OD-63 mm & ID-51 mm nominal |
| 30 | DSR item No.15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required |
| 31 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 32 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 33 | Replacement of CPU Controller Card Main Driver. |
| 34 | Replacement of Line Detection Indications Card of Controller. |
| 35 | Providing & Replacement of Power Supply of controller. |
| 36 | Providing & Replacement of Transformer a Controller. |
| 37 | Replacement of Flasher Card along with wiring Connectors complete in all respects. |
| 38 | Replacement of burnt, damaged Glass Cartridge. |
| 39 | Supply & Erection of aspect Stand of GI For LED aspects. |
| 40 | Supply & Erection of Junction Boxes Complete with Connector & Wiring & Clamps etc. |
| 41 | Replacement of Push button of Pelican Control signal complete in all respects. |
| 42 | Replacement of wiring of logic rack green two pin din connector. |
| 43 | CANTILEVER TYPE POLE: Supply & erection of cantilever GI pipe pole 8.50 Mtr. long. The pole shall be fabricated in two steps with GI pipe 150mm NB dia 3 Mtr. And 125mm dia 6.10 Mtr. Long., (As per Complete Item No. 27 of the DNIT) |
| 44 | RTS POLE:S/E of RTS pole fabricated from 100mm NB dia GI pipe ISI marked (A class) of Jindal/TATA/Hindustan make having length 6 Mtr duly ISI marked. The same shall be welded for proper fixing of signal head assemblies as per site requirement.,(As per Complete Item No. 28 of the DNIT) |
| 45 | Supply/Erection of Solar Panel of 35/37 Watt make TATA/CEL/BHEL complete in all respects with series connected mono crystalline silicon solar cell, toughened high transmission glass, ethyl vinyl acetate Encapsulated Anodized Aluminium Frame, Silicon Frame Seal, Polyester/ Trade/ Terminate back surface complete in all respects |
| 46 | Supply/ Erection of mounting frame for new solar panel to be fixed on 4\\" dia MS Pole complete in all respects |
| 47 | Supply/ Erection of 16\\"X12\\"X9\\" MS box suitable for housing 42 Amp/Hr battery and provided with venting ducts and also having provision for mounting of Automatic Blinker Unit. It should also be reinforced with MS flats for strengthening and mounting of MS pole and also having locking arrangement. The job also includes cost of sealing compound to seal the battery in the MS box to make it theft proof. |
| 48 | S/E of 1000 VA capacity solid state battery Charging Unit working on 220 volts 50 cycles AC supply and suitable to charge 2 Nos. 100 AH 12 V batteries. (As per Complete Item No. 32 of the DNIT) |
| 49 | Supply and Erection of single aspect signal head assembly die moulded 12” dia (300mm) fabricated from polycarbonate material. The approximate size of the same shall be 15”X14”. The assembly shall also be provided with LED type traffic signal covered with glass fabricated from LEDs of light intensity of minimum 2500mcd., (As per Complete Item No. 25 of the DNIT) |
| 50 | Signal head assembly with red / amber glass consisting of 190 LEDs. |
| 51 | Signal head assembly with green arrow/walking man glass consisting of 66 LEDs. |
| 52 | Signal head assembly with red glass consisting of 66 nos. LEDs in standing man shape |
| 53 | Signal head assembly with red cycle glass consisting of 100-140 LEDs. |
| 54 | Signal head assembly with green cycle glass consisting of 100-140 LEDs. |
| 55 | Labour charges for horizontal boring 1 Mtr. Below ground level for laying of DWC pipe including cost of 2 Nos. pit digging and refilling complete in all respects to entire satisfaction of the Engineer In Charge of the work. Please Enable Macros to View BoQ information |
